La Spaziale 3 group heating element 3800W 220/380V
  • La Spaziale 3 group heating element 3800W 220/380V

La Spaziale 3 group heating element 3800W 220/380V


€82.74 tax excl.

Shipment after 4 - 8 working days

  GDPR Compliance

Protecting your personal data

  Shipping policy

Everything about shipping your order

  Return policy

all the inns and outs about our return policy

The heating element on this page is a 3800W heating element suitable for a variety of La Spaziale espresso machine models.

This heating element supplies 3800W at 220/380V. The immersed length of this heating element is 570mm(up to the inside of the flange). The Flange used on this heating element is 85x85mm, the distance between the boltholes is 63mm. The element has 6 connectors all with male spade connectors.

If you want to seal off this heating element you can use a heating element gasket. These are available in fibre and PTFE. But you can also go as they originally where, a o ring. The part number for such a o ring is 02418

This element can be used instead of the original La Spaziale heating element 05505. The espresso machines where this element can be used for is the La Spaziale New, La Spaziale Seletron Plus, La Spaziale Super 3000, La Spaziale S3, La Spazialse S40 and La Spaziale S5


Data sheet

Submerged length
Type part
Heating element
La Spaziale

This does depend of which brand of espresso machine you have. Some espresso machine brands don’t use a heating element thermostat at all. Most thermostats are interchangeable with each other, but always make sure that you use a single phase or a 3 phase version, check out the thermostats we have on our website

Well first of all the heating element flange, seen those are in most cases not interchangeable with each other. seen a Cimbali heating element won’t fit a Nuova Simonelli heating element due to the flange model. A other important feature is the length of the heating element. When it is too long, it won’t fit. When the element is too short you will get uneven heat distribution in the boiler.

Well descaling a heating element is quite simple. A heating element can be placed inside a water tight tube. But the flange can not be submerged, the chance that water gets inside the heating element is possible. Which shorts out the element and makes it unuasable.

To descale a heating element you can use Puly caff Calcinet descaler, this need to be dissolved into hot water. First remove the loose lime scale. If it doesn’t remove all the limescale, repeat the procedure.

A heating element only comes with a gasket when this is specified. If this is not specified a heating element gasket isn’t supplied with the element.

Comments (0)
No customer reviews for the moment.

8 other product