On this page you will find a three phase thermostat. This item is used in a variety of espresso machines. You can find this thermostat with brands like Cimbali Faema and Casadio. This 3 phase thermostat is made by the German company E.G.O. in Germany. The switching off temperature of this thermostat is 169°C and needs to be reset manually by pushing...
This flowmeter, manufactured by the Italian company Gicar, can be found on a lot of La Spaziale espresso machine models. This specific flowmeter has both female connections of ¼”BSP and it can operate up to 20bar. The nozzle installed in the flowmeter has a diameter of 1,15bar. The base is made from low lead content brass CW510L and is NSF...
It is possible that the flowmeter in your espresso machine starts to leak. On this page you will find a replacement part for most flowmeters. This is the sealing o ring which goes between the flowmeter body and the measuring device. This o ring is suitable for Digmesa and Gicar flowmeters. The cord diameter of this o ring is 1,78mm and the inner diameter...
Probably the most used pressure switch used on the Asco P302/6 a 3 phase pressure switch. This pressure switch has been used espresso machines like: La Marzocco, Faema, Cimbali, Astoria, Wega, Nuova Simonelli, La Spaziale, San Remo and so on.The brand Asco used to be the company Sirai, since a while this name has changed but the product remains the same....
On this product page you will find a OEM/Original La Spaziale dosing device unit. This dosing device has the La Spaziale part number 08570. The device has been manufactured by the Italian company Gicar. The Gicar code is 9.5.04.87G. The name of this device is the DOSATURA 30/2GR 230/240Vac. As you expect, it runs on 230/240V. This dosing unit can be...
The rotary vane espresso machine pump. There are various brands which manufacture these pumps like Fluid o tech, Nuert and Procon. The pump on this page is made by the company Procon. Part number 132A060F123B The pump on this page is called a rotary vane clamp pump. The pump is clamped on a flange with a stainless steel clamp. If you tighten this clamp...
The motor on this page is manufactured by the Italian motor manufacturer RPM for the Rancilio espresso machine company. This motor is a OEM/original Rancilio part. The Rancilio part for this motor is 34011102/34011006 The motor itself is model number C040800. This motor gives 150W of power at 230V at 50/60Hz. The motor comes including a capacitor...
On this page you will find the push button assembly for the La Spaziale S2 EP. This key is the only continuous key, so you can start and stop the brewing process by clicking on the button. The part number of this la Spaziale S2 item is 10664
The item on this page is a OEM/Original La Spaziale push button board. This specific item is used on the La Spaziale S2 EP. The part reference number of la Spaziale 10544 . This board has in total 1 keys this is only the PCB so not the membrane nor the keys or plastic body.
The item on this page is a OEM/Original La Spaziale push button board. This specific item is used on the La Spaziale S2 EK. The part reference number of la Spaziale 10543 . This board has in total 5 keys this is only the PCB so not the membrane nor the keys or plastic body.
On this page you will find the push button for the La Spaziale S2 EK. This touchpanel has 5 push buttons. 1 is for continuous and programming of the other 4 dosable keys. This item has been made in Italy. The part number of this la Spaziale S2 item is 10663
Cookie | Provider | Purpose | Expiry |
---|---|---|---|
PHP_SESSID | brooks-parts.com | The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. | Session |
PrestaShop-# | brooks-parts.com | This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. | 480 hours |