Filter by
Manufacturers
Type part
more... less
Type
Price
€ €
Filter

Rocket Giotto type V

Our selection of Rocket Giotto type V parts

Faema E61 valve gasket 15,5x7,5x4mm Faema E61 valve gasket 15,5x7,5x4mm

Faema E61 valve gasket 15,5x7,5x4mm

This gasket is again such a standard type of gasket in the world of espresso coffee machines. It is the EPDM gasket 15.5x7.5x4mm. This gasket is used a variety of applications on espresso machines. Offcourse on the Faema E61 brewing group as well for the E61 style brewing group, as the camme shaft gasket. By brands like Isomac, Bezzera, ECM, Brasilia,...
€0.74
Quick-view
Portafilter gasket 73X57X8.5mm Portafilter gasket 73X57X8.5mm

Portafilter gasket 73X57X8.5mm

This portafilter gasket has a outer diameter of 73mm a inner diameter of 57mm and a thickness of 8,5mm. 73x57x8,5mm. This type of brewing group gasket is one of the most standard portafilters around. You will find this on the Faema E61 groups as well as on the E61 style groups used by Vibiemme, La Scala, Bezzera, San Remo, Fiorenzato and Grimac. Of this...
€4.19
Quick-view
E61 shower screen old style 60mm E61 shower screen old style 60mm

E61 shower screen old style 60mm

This article is one of the earliest designs of the 60mm shower screen. This shower screen is made by IMS CFDR070.  The border diameter is 60mm, it has a internal height of 15,7mm. The internal holes, 112 in total, have a diameter of 2mm Note: this is not a specialty coffee shower, but IMS also produces normal showers. This is, unlike other 60mm models, a...
€4.29
Quick-view
Portafilter gasket 73x57x8mm Portafilter gasket 73x57x8mm

Portafilter gasket 73x57x8mm

The portafilter gasket on this page can be used on various espresso machine models such as ECM Heidelberg, La Pavoni, Rocket and Wega. The part references for this item are for La Pavoni 361014, for ECM Heidelberg C449900229 , for Rocket C449900229 and for Wega W10321/ WY12227  This portafilter gasket has been made from NBR with shore 75. This portafilter...
€3.95
Quick-view
Solenoid valve silicone o...

Solenoid valve silicone o ring 6,07x1,78mm

This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal diameter...
€0.66
Quick-view
PTFE gasket 26x21x2mm

PTFE gasket 26x21x2mm

This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....
€1.38
Quick-view
PTFE gasket 35x30x2mm PTFE gasket 35x30x2mm

PTFE gasket 35x30x2mm

The gasket on this page is a Polytetrafluoroethylene (PTFE) gasket with the dimensions 35x30x2mm. This specific gasket is used on 3 specific places on the E61 style brewing group (the Faema E61 and Faema E61 legend group use a different size of ptfe gasket). It is used to seal off the top trumpet or drain sleeve, on the side of the group the camme holder...
€1.47
Quick-view
Rocket on off switch 16A 250V Rocket on off switch 16A 250V

Rocket on off switch 16A 250V

On this product page you will find a on off switch suitable for various Rocket espresso machine models. This switch is in the style of old rocket switches. This switch is connected with the body panel with a M12 which has a pitch of 1mm. This switch is rated up to 16A at 250V. There are 4 connecting terminals. The Part references of Rocket for this...
€13.54
Quick-view
Heating element gasket PTFE 42x33x3mm Heating element gasket PTFE 42x33x3mm

Heating element gasket PTFE 42x33x3mm

On this page you will find a PTFE heating element gasket is suitable for a variety of brands such as ECM Heidelberg and Bezzera This heating element gasket has a outer diameter of 42mm a inner diameter of 33mm and a thickness of 3mm. This size of gasket is suitable for a 1” screw in heating element.
€3.40
Quick-view
Ulka Vibration pump EX5 230V 50/60Hz with brass outlet Ulka Vibration pump EX5 230V 50/60Hz with brass outlet

Ulka Vibration pump EX5 230V 50/60Hz with brass outlet

On this page you will find one of the most used espresso machine pumps. The Ulka Ex5 48W 230V espresso machine vibration pump. This pump produces 48W at 230V with 50Hz. The inlet connection is 6mm, suitable for a silicone hose. The pump outlet is a 1/8” Bsp, this side is made from brass. There is also a Identical pump the Ulka EP5, this one has a plastic...
€26.74
Quick-view
Stainless steel filter 8.6x22.5mm Stainless steel filter 8.6x22.5mm

Stainless steel filter 8.6x22.5mm

The item on this product page is a stainless steel water filter, this filter is used with various espresso machine brands in the top of the brewing group. You can find this filter with brands such as ECM Heidelberg, San Remo, Vibiemme, La Scala, Bezzera, Grimac, Astoria, La Pavoni and wega. This stainless steel water filter has a outer diameter of 8,5mm...
€3.47
Quick-view
Ulka vibration pumps suction fitting Ulka vibration pumps suction fitting

Ulka vibration pumps suction fitting

The item on this product page is one which can be used on various Ulka espresso machines vibration pumps. This pump inlet can be used with brands such as Grimac, Elektra, Fiorenzato, Rancilio, Saeco and Gaggia. The Ulka part reference number for this item is 8.01.033 This 90 degree fitting has been made from a plastic called santoprene. The internal pump...
€2.76
Quick-view
E61 style group spout breaker E61 style group spout breaker

E61 style group spout breaker

On this page you will find a brewing group spray nozzle. This nozzle is one of the most used spay nozzles used in the world of espresso machines. The nozzle has a outer diameter of 30mm and the male thread, which threads into the brewing group, is M10x1mm. What is the purpose of having a nozzle. Well the spray nozzle is located above the shower screen....
€6.37
Quick-view
Drain valve assembly Drain valve assembly

Drain valve assembly

The drain valve is responsible for draining the last water out of the E61 style brewing group. This espresso machine part is made up out of 4 parts. The gasket holder, the gasket, small brass washer and a triangular valve rod. The total length of this part is 27mm. This drain valve used in a variety of espresso machine brands like: Expobar CTAV1-05,...
€8.99
Quick-view
Brewing group gigleur 0.6mm Brewing group gigleur 0.6mm

Brewing group gigleur 0.6mm

This nozzle/gigleur is installed primarily in the brewing group on a espresso machine. It has a hole diameter 0,6mm. There are a variety of diameters available. The thread used on the part is a male M6 with a pitch of 0,75mm. The thread pitch can vary between 0,75mm and 1mm keep that in mind. But also the diameter of the nozzle can vary, so expect when...
€1.58
Quick-view
Gasket PTFE 22x16x2mm Gasket PTFE 22x16x2mm

Gasket PTFE 22x16x2mm

This a universal Polytetrafluoroethylene (PTFE) gasket with 22x16x2mm. The gasket is used on a variety of espresso machine components. This type of gasket found boilers, brewing group and valve assemblies. The most common location for this to seal off the 3/8” male nut on the top of the Faema E61 and E61 style brewing groups like with Bezzera, Brasilia,...
€0.86
Quick-view
Contact thermostat 135°C with M4 thread Contact thermostat 135°C with M4 thread

Contact thermostat 135°C with M4 thread

On this product page you will find a contact thermostat which is used on a variety of espresso machine brands. You can find this contact thermostat on Bezzera and Rocket espresso machines. The Bezzera part reference is 7434009 and the Rocket part reference is C199901550 This contact thermostat is set at 135°C and is a manual reset model. The contact...
€10.71
Quick-view
Faema E61 group infusion spring 14x45mm Faema E61 group infusion spring 14x45mm

Faema E61 group infusion spring

On this page you will find a stainless steel compression spring with a outer dimension of 14mm and a length at rest of 45mm. This compression spring is being used in a variety of espresso machine brewing groups. This ranges from the famous Faema E61 brewing group, the E61 style brewing group. But also a variety of other type of brewing groups used by...
€1.62
Quick-view
Microswitch NR7K5 10(2)A 250V Microswitch NR7K5 10(2)A 250V

Microswitch NR7K5 10(2)A 250V

The microswitch on this page can be used on a variety of Rocket espresso machines. The matching Rocket part reference for this item is A199905198. This switch has a small push able metal roller, this activates the switch when pushed. The microswitch is a NR7K5 rated up to 10A at 250V. You can use this switch on various Rocket espresso machine models such...
€36.78
Quick-view
E61 style camme rod Vibiemme brass lever rod

E61 style camme rod

This camme rod for E61 style espresso machines is slightly different then the one used in the Faema E61. This one has a small guide pin at the end which goes inside the group. On the other side there is a squared off section for the lever arm. This section is 6x6mm. To hold the lever in place there is a M6 thread on the end for some sort of a nut. This...
€20.25
Quick-view
Drain valve pre-assembled 52,8mm Drain valve pre-assembled 52,8mm

Drain valve pre-assembled 52,8mm

The drain valve on this page is used in a variety of E61 style of brewing groups. You will find this model of drain valve assembly on brands such as Bezzera, ECM Heidelberg, Isomac, La Pavoni, Brasilia, Grimac and Royal. This drain valve comes pre-assembled. The assembly contains the triangular shaped shaft, gasket holder, gasket, flat washer and the...
€15.01
Quick-view
Heating element 1200W 230V Heating element 1200W 230V

Heating element 1200W 230V

The heating element on this product page can be found on various espresso machine brands such as Rocket and ECM Heidelberg. The rocket part reference is C199901551 and for ECM it is C199901551. This heating element produces 1200W at 230V and there are 2 connecting poles. The immersed depth is 130mm. the heating element flange is a screw in type and has a...
€62.08
Quick-view
Level probe 1/4 80mm Level probe 1/4 80mm

Level probe 1/4 80mm

The item on this page is a boiler level probe. This specific model of level probe can be found on various Rocket espresso machine models. The Rocket part reference for this item is C199900839 This level probe has been made up out various components. The probe itself is made from stainless steel and has a length of 80mm, this is sealed of with a PTFE...
€10.17
Quick-view
Compression spring 13x42mm Compression spring 13x42mm

Compression spring 13x42mm

This stainless steel compression spring is used in the Faema E61 and E61 style brewing groups. But what does this specific do? Well this is the last compression spring in the brewing group. It is the compression spring in the brewing valve which closes the exhaust valve all the way at the bottom of the E61 brewing group. Besides the E61 group spring it is...
€2.02
Quick-view