Filter by
Rocket
Type part
more... less
Type
Filter

Rocket espresso model spare parts

The Rocket espresso machine brand is one of the newest brands in the world of espresso machines.  This brand originates from the city of Milano in Italy and is well known for their domestic espresso machines. But they do also manufacture various espresso machines for the commercial market.

Faema E61 valve gasket 15,5x7,5x4mm

This gasket is again such a standard type of gasket in the world of espresso coffee machines. It is the EPDM gasket 15.5x7.5x4mm. This gasket is used a variety of applications on espresso machines. Offcourse on the Faema E61 brewing group as well for the E61 style brewing group, as the camme shaft gasket. By brands like Isomac, Bezzera, ECM, Brasilia,...
€0.74
Quick-view

Portafilter gasket 73x57x9mm

Every brewing group uses a portafilter gasket. In this case it is a 73x57x9mm gasket. In this case they are made from a food grade nitrile butadiene rubber(Nbr) The OD and ID of 73x57mm is quite a standard size. You will see this size with brands like Expobar, Vibiemme (VBM), La Scala, Bezzera, Faema and Azkoyen. This doesn’t mean that these brands don’t...
€4.17
Quick-view

Filterholder gasket 72.5x57x8 mm

The portafilter gasket on this product page can be used with a wide selection of brands. This portafilter gasket can be used on Brasilia, San Remo, la Scala, Bezzera, Faema, Vibiemme and Pavoni espresso machines. This gasket has been made from NBR. The outer diameter is 72,5mm, the inner diameter is 57mm and the thickness is 8mm. This gasket has been made...
€3.67
Quick-view

Faema E61 valve gasket 13x4x4mm

The valve gasket on this page can be used on numerous of espresso machine brands such as Vibiemme, Wega, La Scala, Faema, La Pavoni, Brasilia and Grimac. This gasket in mainly used in the steam and water valves as well as in the water inlet valves. But the best example is in the E61(type) of brewing groups. The part reference list can be found in the...
€0.74
Quick-view

Filterholder suplement gasket 73x59x0.8mm

The paper shim on this page is one of the most widely used paper shim. You can use this type with a wide selection of espresso machine brewing groups. What are the dimensions of this paper shim? They have a outer diameter of 73mm, a inner diameter of 59mm and a thickness of 0,8mm. What does a paper shim do? Brewing group locking mechanisms wear due to...
€0.65
Quick-view

Portafilter gasket 73X57X8.5mm

This portafilter gasket has a outer diameter of 73mm a inner diameter of 57mm and a thickness of 8,5mm. 73x57x8,5mm. This type of brewing group gasket is one of the most standard portafilters around. You will find this on the Faema E61 groups as well as on the E61 style groups used by Vibiemme, La Scala, Bezzera, San Remo, Fiorenzato and Grimac. Of this...
€4.19
Quick-view

E61 shower screen old style 60mm

This article is one of the earliest designs of the 60mm shower screen. This shower screen is made by IMS CFDR070.  The border diameter is 60mm, it has a internal height of 15,7mm. The internal holes, 112 in total, have a diameter of 2mm Note: this is not a specialty coffee shower, but IMS also produces normal showers. This is, unlike other 60mm models, a...
€4.29
Quick-view

Portafilter gasket 73x57x8mm

The portafilter gasket on this page can be used on various espresso machine models such as ECM Heidelberg, La Pavoni, Rocket and Wega. The part references for this item are for La Pavoni 361014, for ECM Heidelberg C449900229 , for Rocket C449900229 and for Wega W10321/ WY12227  This portafilter gasket has been made from NBR with shore 75. This portafilter...
€3.95
Quick-view

Solenoid valve silicone o ring 6,07x1,78mm

This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal diameter...
€0.66
Quick-view

Anti vacuum valve V.A.R. 1/4"

On this product page you will find a anti vacuum valve. This valve is made completely out of brass and can be easily disassembled. This type of anti vacuum valve is used with quite a lot of espresso machine brands. This valve has a male ¼”BSP-G thread. The o ring inside the valve is made from HNBR, but the o ring end stop is made from PTFE. As mentioned...
€10.91
Quick-view

PTFE gasket 26x21x2mm

This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....
€1.38
Quick-view

PTFE gasket 35x30x2mm

The gasket on this page is a Polytetrafluoroethylene (PTFE) gasket with the dimensions 35x30x2mm. This specific gasket is used on 3 specific places on the E61 style brewing group (the Faema E61 and Faema E61 legend group use a different size of ptfe gasket). It is used to seal off the top trumpet or drain sleeve, on the side of the group the camme holder...
€1.47
Quick-view

Rocket on off switch 16A 250V

On this product page you will find a on off switch suitable for various Rocket espresso machine models. This switch is in the style of old rocket switches. This switch is connected with the body panel with a M12 which has a pitch of 1mm. This switch is rated up to 16A at 250V. There are 4 connecting terminals. The Part references of Rocket for this...
€13.54
Quick-view

Heating element gasket PTFE 42x33x3mm

On this page you will find a PTFE heating element gasket is suitable for a variety of brands such as ECM Heidelberg and Bezzera This heating element gasket has a outer diameter of 42mm a inner diameter of 33mm and a thickness of 3mm. This size of gasket is suitable for a 1” screw in heating element.
€3.40
Quick-view

Ulka Vibration pump EX5 230V 50/60Hz with brass outlet

On this page you will find one of the most used espresso machine pumps. The Ulka Ex5 48W 230V espresso machine vibration pump. This pump produces 48W at 230V with 50Hz. The inlet connection is 6mm, suitable for a silicone hose. The pump outlet is a 1/8” Bsp, this side is made from brass. There is also a Identical pump the Ulka EP5, this one has a plastic...
€26.74
Quick-view

Stainless steel filter 8.6x22.5mm

The item on this product page is a stainless steel water filter, this filter is used with various espresso machine brands in the top of the brewing group. You can find this filter with brands such as ECM Heidelberg, San Remo, Vibiemme, La Scala, Bezzera, Grimac, Astoria, La Pavoni and wega. This stainless steel water filter has a outer diameter of 8,5mm...
€3.47
Quick-view

Ulka vibration pumps suction fitting

The item on this product page is one which can be used on various Ulka espresso machines vibration pumps. This pump inlet can be used with brands such as Grimac, Elektra, Fiorenzato, Rancilio, Saeco and Gaggia. The Ulka part reference number for this item is 8.01.033 This 90 degree fitting has been made from a plastic called santoprene. The internal pump...
€2.76
Quick-view

E61 style group spout breaker

On this page you will find a brewing group spray nozzle. This nozzle is one of the most used spay nozzles used in the world of espresso machines. The nozzle has a outer diameter of 30mm and the male thread, which threads into the brewing group, is M10x1mm. What is the purpose of having a nozzle. Well the spray nozzle is located above the shower screen....
€6.37
Quick-view

Safety valve 3/8" 1,8bar CE PED IV

The boiler safety valve shown on this page can mainly be found on La Pavoni espresso machine boilers. The La Pavoni part reference for this item is 395221G This boiler safety valve has a male 3/8” BSP-G thread. The pre-set pressure is 1,8 bar and nonadjustable. The seal used is a FKM seal, when opened the steam outlet is 872 L/M. This valve is CE and PED...
€13.27
Quick-view

Drain valve assembly

The drain valve is responsible for draining the last water out of the E61 style brewing group. This espresso machine part is made up out of 4 parts. The gasket holder, the gasket, small brass washer and a triangular valve rod. The total length of this part is 27mm. This drain valve used in a variety of espresso machine brands like: Expobar CTAV1-05,...
€8.99
Quick-view

PTFE gasket 21x16.8x2mm

The PTFE gasket on this page can be used on a variety of espresso machines brands and various applications. You will mainly find this gasket as a seal with water and steam valves, but you can also find them in brewing groups. This PTFE gasket has a outer diameter of 21mm a inner diameter of 16,8mm and a thickness of 2mm. You can use this flat gasket in...
€0.99
Quick-view

Brewing group gigleur 0.6mm

This nozzle/gigleur is installed primarily in the brewing group on a espresso machine. It has a hole diameter 0,6mm. There are a variety of diameters available. The thread used on the part is a male M6 with a pitch of 0,75mm. The thread pitch can vary between 0,75mm and 1mm keep that in mind. But also the diameter of the nozzle can vary, so expect when...
€1.58
Quick-view

Gasket PTFE 22x16x2mm

This a universal Polytetrafluoroethylene (PTFE) gasket with 22x16x2mm. The gasket is used on a variety of espresso machine components. This type of gasket found boilers, brewing group and valve assemblies. The most common location for this to seal off the 3/8” male nut on the top of the Faema E61 and E61 style brewing groups like with Bezzera, Brasilia,...
€0.86
Quick-view

Contact thermostat 135°C with M4 thread

On this product page you will find a contact thermostat which is used on a variety of espresso machine brands. You can find this contact thermostat on Bezzera and Rocket espresso machines. The Bezzera part reference is 7434009 and the Rocket part reference is C199901550 This contact thermostat is set at 135°C and is a manual reset model. The contact...
€10.71
Quick-view

Our Assortment

We sell a variety of spare parts for Rocket espresso machines, this can be after market parts but also original. You do see that there are a lot of universal parts used on the domestic and commercial espresso machines made by Rocket Milano.

Availability and warranty

Most parts we sell of Rocket are in stock or available within 1-2 working days. If we don’t have the products in stock or listed on our website, don’t hesitate to contact us so that we can help you out finding the correct part.

The different Rocket espresso machine models

The brand Rocket Milano does have a variety of commercial and domestic espresso machines. The brand Rocket is mainly famous from their domestic E61 style of espresso machines, but less for their commercial espresso machines. Even though these are also well build and very well performing coffee machines.

Rocket Giotto

The Rocket Giotto espresso machines where we sell spare parts for. This espresso machine has been build in various configurations such as with a Ulka Vibration pump and tank, or with a fluid o tech pump and RPM motor. But still with the basis, a e61 style brewing group. This espresso machine is ideal for any home barista.

Rocket Mozzafiato Evoluzione

The Rocket Mozzafiato Evoluzione is just as the model above one of the domestic espresso machines made by Rocket Milano. This espresso machine is a manual type of espresso machine, seen you need to move a lever up and down to turn it on and off, with on each side a pressure gauge.

Rocket R58

The model Rocket R58 coffee machine is one of the more high end, it is a dual boiler espresso machine with a E61 style of brewing group. The brewing boiler has been fitted with a thermal pid, which gives really good temperature stability. For the Rocket R58 espresso machine we have a variety of spare parts, if you can’t find the parts your looking for, don’t hesitate to contact us.

Rocket Appartamento

The Rocket Appartamento is also one of the espresso machines from the domestic espresso machine series from Rocket Milano. This model is a HX espresso machine which can be fitted with or a Ulka Vibration pump or with e Fluid o tech pump. There is a price difference between these models, seen vibration pumps are cheaper. But basically all espresso machines are ideal for home barista’s even if you are a bit more expierenced.

Important parts on Rocket-espressomachines

You would think all parts on a Rocket espresso machine are important, and yes that is also the case. But there are spare parts which make a difference if you compare it to other E61 style of espresso machines. Below is a overview of these various

Boiler

There are various boiler configurations on Rocket espresso machines. The most common type of boiler is the Heat Exchanger (HX) version. the HX boiler system is one of the most common types around next to the dual boiler system. The HX boiler has a thermophonic system, where the brewing water flows diagonally true the boiler into the brewing group.

With a dual boiler system, such as with the rocket R58 espresso machine. This espresso machine is fitted with a steam boiler and a brewing group boiler. Which is controlled with a thermal PID system

Brewing group

The brewing groups used on the Rocket espresso machines are the most common type, the E61 style of brewing group. This type of brewing group is a manual operated brewing group, which has a variety of spring and valve components inside to operate like a harmonized system. A lot of the spare parts used on the Rocket e61 models are generic, but there are some valve parts in this brewing group which are not the same.

Steam valve

The steam valves used on Rocket espresso machine are quite simple types of valves. They are valves which can be opened and closed by turning the valve knob. The Rocket espresso machines use 2 types of valve. The E61 style of steam valve, which is on a slight angle and the small straight model, both a opened and closed by turning the valve knob.

Pump

On most domestic espresso machines, as well on Rocket espresso machines, a Ulka vibration pump is used, which is ideal when you don’t have too much space. But the disadvantage is that they just lack performance if you want to push it a bit further, you will require a motor/pump assembly. For Rocket espresso machines these different types of configuration are indicated in the V and R models. The V is the vibration pump, where the R is the Rotation pump made by Fluid o Tech

Electronics

The espresso machines of rocket are fitted with a variety of electronic spare parts. This does depend on which model, seen when you have a Rocket Giotto, which is a pressure controlled espresso machine. So that requires a lot less electronics then the dual boiler Rocket R58. Which is fitted with a thermal PID system and for that reason also a solid state relay to power the heating element.