Filter by
Manufacturers
Type part
more... less
Type
Price
Filter

Rocket R58 espresso machine

This espresso machine is one of the few dual boiler coffee machines around, especially for a domestic coffee machine. But at some point in life the Rocket R58 will also break down and seals start to leak. On this page you can find the most of the parts for the Rocket R58 espresso machine

Rocket R58 espresso machine parts

Rocket single portafilter

the single portafilter on this product page can be used on various Rocket espresso machines. The Rocket part reference for this item is A699905020 This single portafilter has a ear orientation of 90 degree. The thickness of the ears of this portafilter is 5,7mm. The portafilter does come with a stainless steel spring and a single filterbasket. This...
€36.29

Drain valve pre-assembled 52,8mm

The drain valve on this page is used in a variety of E61 style of brewing groups. You will find this model of drain valve assembly on brands such as Bezzera, ECM Heidelberg, Isomac, La Pavoni, Brasilia, Grimac and Royal. This drain valve comes pre-assembled. The assembly contains the triangular shaped shaft, gasket holder, gasket, flat washer and the...
€11.97

E61 chromed group collector

The drain valve on this page can be used on various E61 style of brewing groups. Models such as ECm, ECM Heidelberg, La Pavoni, Rocket and Vibiemme espresso machines. Not on the Faema E61 This drain valve has been machined from a single piece of brass. After that it has been polished, nickel plated and finally chrome plated. This item is made in Italy....
€52.47

Temperature probe 1/4" M

On this page you will find a NTC thermistor sensor, or just NTC. These probes are connected to a PID, this sensor basically reads the temperature inside the boiler. This specific item is used with the Rocket R 60V and the Rocket R58 espresso machine (A199904679). But this NTC probe is also used in a variety of Vibiemme models like the Vibiemme Domobar...
€43.25

Faema E61 sleeve

On this page you will find a camme guide bushing. This part is a generic part for Faema E61 brewing groups and the brewing groups made in the E61 style. This part is made from brass with a total length of 28mm, the outer dimensions are 15 and 10 mm. The ID is 8mm and the head of the bushing has a thickness of 5mm. This part slides over the shaft off the...
€2.52

Faema E61 camme spring 15x25mm

This stainless steel compression spring with the dimensions of 15x25mm is normally used as a camme spring on a Faema E61 brewing group or on E61 style brewing groups.  Like with the Faema E61, Faema E61 legend, Grimac, Isomac, Pavoni, Wega and a variety of other brands which use a e61 style of brewing group. Besides that option, this model...
€1.21

Anti vacuum valve 1/4" stainless steel

The anti-vacuum valve on this page can be used on various espresso machine models of the brand San Remo. The anti vacuum valve has the San Remo part reference of 10652040A  This anti vacuum valve has been made from stainless steel. The thread used is a male ¼” BSP-G thread. This stainless steel anti vacuum valve has been made in Italy...
€9.46

Rocket portafilter gasket 73x57x8mm original

This portafilter gasket is used on a variety of Rocket espresso machines. This specific item is a OEM/original Rocket spare part. The part reference number for this item is C449900229 This portafilter gasket has a outer diameter of 73mm a inner diameter of 57mm and a thickness of 8mm. This gasket has been made in Italy. This portafilter gasket can be used...
€5.14

Contact thermostat 135°C with M4 thread

On this product page you will find a contact thermostat which is used on a variety of espresso machine brands. You can find this contact thermostat on Bezzera and Rocket espresso machines. The Bezzera part reference is 7434009 and the Rocket part reference is C199901550 This contact thermostat is set at 135°C and is a manual reset model. The contact...
€8.34

L fitting brass 3/8" MF

The item on this product page is a L shaped fitting, with a male and a female connection. This fitting can be used on home build projects, but also on espresso machine brands such as Spaziale This fitting is made from casted and machined brass. The item can be nickel plated, this is not always the case. On one side you will have a female 3/8” BSP-G thread...
€4.16

Rocket heating element 1400W 230V

The heating element on this page can be used in some Rocket espresso machines as a heating element for the water and steam boiler. The Rocket part reference for this item is A110004667 This heating element generates 1400W at 230V. The element has 2 connection poles. The immersed depth of this element is 105mm. The fitting used for this element is a...
€58.71

Technical features on the Rocket R58

The Rocket R58 has quite a lot of technical features installed. In this case you mainly need to think of electronic temperature control. Most espresso machines make use of temperature control with a pressure switch

Dual boiler

The Rocket R58 espresso machine has, as one of the few, a double boiler. You normally only see this on the commercial high end espresso machines. But now on the Rocket R58 coffee machine. The small boiler, which has a 1400W heating element, is used for the water for the brewing group.

The boiler used for the steam and water boiler is a heating element, with the same wattage of 1400W, which has a different design the ones used on the coffee boiler. The total of 2800W of heating power is plenty enough of heating power.

E61 brewing group

The Rocket R58 is also fitted with a manual E61 style of brewing group, as you see with most domestic Rocket espresso machines. A lot of the parts used on the E61 style of brewing groups are universal, but there are also various which are unique to the brand Rocket.

Pump and motor

Where most domestic espresso machines, also from Rocket, use a Ulka vibration pump. The Rocket R58 doesn’t use a vibration pump. They use a pump and motor assembly. The motor is made by the Italian company RPM and the pump is made by Fluid o tech, but if you have a pump with similar specs you can also use that one as well.

Water tank

The water tank on the back of the Rocket R58 makes it possible that you don’t have to have a main water connection.  From this water tank the water is pumped into the water boilers of the espresso machine. This needs to be pumped, seen the boilers are pressurized.

Maintenance on your Rocket R58

Keeping your Rocket R58 espresso machine is good working condition is very important if you want to keep the quality of your espresso at a high level. Besides that keeping your coffee machine clean will also result in extending the longevity of the espresso machine.

Backflushing your brewing group

Backflushing your brewing group should be a daily routine if you want to keep your espresso machine in the best possible condition. For this you will need a blind filter filterbasket and a cleaner, such as the Puly Caff powder. For full instructions on how to clean your brewing group just check out Blog posts about this topic.

Descaling your boilers

With a typical Heat Exchanger (HX) espresso machine boiler it is possible that you descale your espresso machine via the water tank. But in the case of a dual boiler espresso machine we do advice to not do this. The most important thing is that you use a proper water filter for your Rocket R58, note: this does not prevent the build up of scale, but reduces a lot.

 

Rocket Milano R58 parts from Brooks

At Brooks we sell a variety of spare parts for the Rocket R58 espresso machine. This can be OEM/original spare parts, but also a variety of aftermarket parts. If you are not entirely sure which components you need for your espresso machines, don’t hesitate to contact us.