Vibiemme Domobar Super

This ½” chrome plated stuffing nut has a central hole of 10,7mm. The item itself has a height of 17mm. You need a metric key 22 to install this item. This is quite a common key size in most peoples toolbox. But what is the function of this part and where can it be found. This threaded stuffing gland is used in the side of the Faema E61, Faema E61 Legend...

This chrome plated drain valve is used on a variety of espresso machine brands and models which use the E61 style brewing group. The item has a overall length of 26mm and a male thread of ½”. The drain fitting holds the drain jet in place, this part is used a spring support for the drain valve spring. This coffee machine part for the E61 style group is...

The top HX boiler fitting, a generic item you will find with a lot of espresso machine brands. This ranges from Vibiemme, Grimac, Pavoni, La Scala to Expobar, Brasilia and BFC. This specific item is a casted brass fitting. The side which is screwed into the HX is a ½”BSP-g and the side where the tube to the brewing group goes to is also a...

Non Return Bypass Fitting S2

The portafilter gasket shown on this page is used with various espresso machines of the Cimbali group and with Vibiemme espresso machines. the part reference numbers can be found in the extra info tab. This portafilter gasket has been made from NBR. The outer diameter is 74mm the inner diameter is 57,5mm and the thickness is 8mm. This gasket has 4...

On the top of a Faema E61 brewing group or a E61 brewing group is always the final item. That’s a chrome plated 3/8” male plug. Nothing else nor something special. This is generic part which can also be used in a variety of situations then a E61 brewing group, but also on different locations on a espresso machine. Like on the boiler with a...

The item on this page is a PTFE heating element gasket, which is used on various espresso machine brands such as Casadio, San Remo, Vibiemme, Grimac , Brasilia and Astoria. The part reference numbers for this heating element gasket can be found in the extra info tab. As mentioned before this gasket has been made from PTFE. The outer diameter is 53mm, the...

The 2 coffee filterbasket on this page can be used a big variety of espresso machine brands. You can use this basket on brands such as Casadio, Brugnetti, ECM Heidelberg, San Remo, Faema, Vibiemme, La Scala, Grimnac. This filterbasket has been made by the Italian company IMS Filtri. The IMS part reference is CF2T068. Note: this is not a competition...

This steam and water valve knob for your Vibiemme ( MANPRUSC ) Domobar Junior and Domobar Super. The outer dimensions of this knob are 35x35mm. note there is also a type knob available which has the dimensions 43x43mm. so slightly bigger. The internal hole of the steam and water valve knob is a square of 6x6mm. This steam and water tab knob can be used...

This stainless steel cam lock prevents you from turning the camme shaft on the E61 and E61 style group too far. It has a male M6 thread on one side, the other side has a slit to screw the part in the Brewing group with a flat head screwdriver. This coffee machine parts is being used with a variety of brands like: Bezzera 7479951, Brasilia 13651.0.40.04,...

The microswitch on this product page is used on various espresso machine brands such as Vibiemme and La Pavoni. The La Pavoni part reference number is 435080 and the Vibiemme part reference number is ELETMICP1. This microswitch is used as part of the brewing group. When this switch is turned on the pump starts running. This microswitch has a longer lever...

This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....