Filter by
Type part
Price
Filter

Vibiemme Lollo steam and water valve

Vibiemme Chimaera steam and water valve

Vibiemme Lollo steam and water valve

Bush pipe ball

On this page you will find a brass steam pipe bushing. But what is a pipe bushing. A pipe bushing makes it possible to move the steam and water wand freely without leaking. So how does it work? Well the pipe bushing has on the valve side 2 o rings, these seal against the side of the inside of the valve. But on the top ring of the pipe bushing there is...
€4.02

O ring gasket FKM 10.78x2.62mm

On this page you will find a o ring with the dimensions 10,78x2.62mm. It is made from FKM (viton is a registered trade brand, but the material is identical) This o ring is used in a variety of locations in espresso machines. It is used with steam and water wands in espresso machines with brands like: Marzocco, Casadio, Vibiemme, Grimac, Cimbali and Faema....
€0.90

Knob M8x1,25mm

This small rounded off knob is used on steam and water valves, but also on handles of brewing groups. You can find this handle on a variety of brands such as Vibiemme, Wega, Astoria, Grimac, and ECM Heidelberg. This black knob has a high gloss finish. The thread inside is a M8 with a pitch of 1,25mm. The item has been made in Italy. You can use this...
€7.51

Brass half nut 3/8" 6mm hex 24

This brass nut has a female thread of 3/8” bsp and a height of 6mm. The outer size is 21 or 24mm, this can vary sometimes and can’t be selected. So where is this brass hex nut used in espresso machines? You can find this model hex nut mainly on water and steam taps of brands like, Royal, La Spaziale,  La Scala, Nuova Simonelli, Victoria...
€2.62

Hardened stainless steel guide

The item on this page is a hardened steel bushing for a steam and water valve. This bushing can be used on various espresso machine brands such as ECM Heidelberg, Fiorenzato, Marzocco and Vibiemme. The ECM Heidelberg part reference number is P6003.4 , the Fiorenzato part reference is A1300120 , the Marzocco reference is B.1.004/4 and the...
€4.73

Hardened steel shaft lever tap

The item on this page is a hardened steel pin for a steam and water valve. This shaft can be used on various espresso machine brands such as ECM Heidelberg, Fiorenzato, Marzocco and Vibiemme. The ECM Heidelberg part reference number is P6003.3, the Fiorenzato part reference is A2200266, the Marzocco reference is B.1.004/3 and the Vibiemme part...
€9.73

Brass o ring guide

The item on this page is a hardened brass gasket holder for a steam and water valve. This bushing can be used on various espresso machine brands such as ECM Heidelberg, Fiorenzato, Marzocco and Vibiemme. The ECM Heidelberg part reference number is P6003.5, the Fiorenzato part reference is A2200268 , the Marzocco reference is B.1.004/5  and...
€4.38

Hardened steel insert

The item on this page is a hardened steel bush used on various steam and water valves. This item can be used on brands such as Vibiemme, Marzocco, ECM Heidelberg and Fiorenzato. The ECM Heidelberg part reference number is P6003.2, for Fiorenzato it is A2200265, for Marzocco it is B.1.004/2 and for Vibiemme it is RACCINSRUBLOL. This steel bushing has...
€4.16

Spring for steam valve 13x27mm

This steam valve spring is used with the Vibiemme Lollo and various models from ECM like Elektronika II Profi and Mechanika. This specif spring is a stainless steel compression spring with the outer diameter of 13mm and a length of 27mm. Where is this specific spring used. It is in this specific steam and water valve spring used as a valve return...
€3.03

Vibiemme Lollo water/steam tap

On this product page you will find a chrome plated steam and water valve suitable for the Vibiemme Lollo espresso machines. The Vibiemme part reference of this item is ASSRACCRUBLOLLO  This steam and water valve has been made from brass and chrome plated afterwards. The in and outlet fittings are on both sided a 3/8”BSP-G thread.  This...
€73.19

Spring for steam valve 10.8x30 mm

The compression spring on this product page is used in various steam and water valves. Brands which used this model of compression spring where ECM Heidelberg, Vibiemme and La Scala. The part references are for Vibiemme MOLLTUVA, MOLTUVA and  MOLTUVARUBEVO. For ECM Heidelberg the part reference number is P6003.13  This stainless steel...
€3.26

PTFE gasket 24x19x2mm

The gasket on this product page is made from PTFE. This type of gasket is used with various brands such as ECM Heidelberg, Marzocco, Vibiemme and Fiorenzato. The part references are for ECM Heidelberg P6003.10, for Marzocco H.2.002, for Fiorenzato A1200009 and for Vibiemme GUARTEF24192. This gasket has been made from PTFE.  The outer diameter...
€1.36