Filter by
Manufacturers
Type part
more... less
Type
Price
Filter

Wega Nova

Wega Nova Espresso Machine Parts

The Wega Nova is one of the older models in the Wega espresso machine lineup, and despite its age, it remains in production today. This model has been updated both technically and aesthetically over time. The Wega Nova is available in several versions, including the Wega Nova Leva, Wega Nova EPU, and Wega Nova EVD.

Wega Nova espresso machine parts

RPM clamp ring motor 330W 220/240V 50/60Hz

This RPM motor pump(model number C042204) is one of the more uncommon espresso machine pumps used. The cooling of this motor occurs by running the water which comes out of the pump true the motor to cool it down. This type of coffee machine pump is only used by the Astoria CMA group, so you would only see them on Astoria CMA and Wega espresso machines....
€277.74

Fluid o tech clamp ring pump 100 L/H

The rotation pump on this page is made by the Italian manufacturer Fluid o tech, the pump type is designated as model “Standard” with the Fluid o tech manufacturer code: PA0104AGANN0000 This model of rotation pump is a clamp ring type. The pump face and motor face are pushed against each other and a stainless-steel clamp is place around it....
€113.55

Astoria Wega steam water shaft gasket

The valve shaft gasket on this page is used with basically every steam and water valve manufactured for Astoria and Wega espresso machines. This gasket makes sure that there doesn’t leak any steam or water past the shaft of the valve. The Astoria part reference is 12204 and the Wega part reference is WY12204  This gasket has been made out...
€1.24

Bremas main switch 20A 690V

The Bremas main switch on this page is used on coffee grinders as well on espresso machines. You will find this model switch on the brands Mazzer, Astoria and Wega. The list of part references can be found in the extra info tab. This Bremas selector switch is rated up to 20A at 690V. This switch has 2 positions 0-1. The switch does not come with a knob....
€64.57

Astoria/Wega electronic box 1-3 gr SB/GL 230V

On this page you will find a OEM/Original Astoria CMA electronic box for various models of Astoria and Wega. The Astoria code for this part is 18090048  and the Wega part number is WY18090048  The dosing control unit SB/GL “2004”PLUS1, runs on 230V at 50/60Hz. It is suitable for 1 – 3 brewing groups. This dosing device is...
€471.16

E61 upper pipe

The item on this product page is the upper drain sleeve. This drain sleeve can be used with a wide selection of E61 brewing groups. Such as with the brand Faema, ECM, ECM Heidelberg, Isomac, Pavoni, Rocket and San Remo. This drain sleeve has been made from machined brass. This has been afterwards been nickel and chrome plated. The fitting on the inside...
€35.12

Boiler safety valve 3/8" 1.8 bar CE-PED

The boiler safety valve shown on this page can be used on wide selection of espresso brands such as Brasilia, Wega, Astoria, Grimac, Cimbali, Faema, Marzocco and Carimali. The part references can be found on the extra info tab. This boiler safety valve has a male 3/8” BSP-G thread. The safety valve has been set at 1,8 bar, this is not adjustable. When the...
€22.82

Astoria/Wega Safety valve cover

The item on this product page is a safety valve protective cover, if the safety valves opens this valve will drain the water coming out of the valve to the drain. This cover is a OEM/Original Astoria CMA spare part, so you can use this item on various espresso machine brands such as Astoria and Wega. The Astoria part reference number is 56009980 and the...
€17.53

Astoria Wega steam valve nut

The steam and water valve nut on this page can be used on almost every Astoria and Wega steam and water valve. This axle nut makes sure that there is a constant pressure on the valve shaft spring, which prevents leaking from the valve shaft. This item is a OEM/original Astoria/Wega spare part. The Astoria part number for this item is 25385001 and...
€7.51

Astoria Wega gasket 15x4x4mm

This product is a flat EPDM gasket used in steam and water valves and water inlet valves of the Astoria CMA group. So you will find them in Astoria and Wega espresso machines. The Astoria part number for this item is 12203 and the Wega part number is WY12203. This gasket has been made from EPDM. The outer diameter of this gasket is 15mm. the inner...
€0.71

Astoria wega brass washer 15.4mm

The brass washer on this product page is a OEM/Original Astoria CMA spare part. This brass washer is used in the water inlet valve. The Astoria part reference is 25653 and the Wega part reference is WY25653. This washer has been made from brass. The outer diameter is 15,4mm the inner diameter is 9mm and the thickness is 1mm. This item has been made...
€0.89

Portafilter gasket 73x57x8,5mm

The portafilter gasket on this page is used on various Wega espresso machine models. The Wega part reference for this item is WY12228. This portafilter gasket has been made from NBR. This gasket has a outer diameter of 73mm a inner diameter of 57mm and a thickness of 8,5mm. There are on the inside 3 cuts. This gasket has been made in Italy. You can use...
€3.13

Models Available in the Wega Nova Series

  • Wega Nova Leva
  • Wega Nova EPU
  • Wega Nova EVD

Wega Nova Leva

The Wega Nova Leva is the lever-operated version of the Wega Nova. In this model, brewing pressure is not generated by a pump but through a manually operated compression spring. This traditional method is highly regarded by espresso enthusiasts who prefer manual control over their brewing process. If you're looking for more information or parts for lever-operated machines, we recommend visiting our dedicated site, Brooks-espressomachines, which focuses on lever espresso machines.

Wega Nova EPU

The Wega Nova EPU is the basic manual version of the Wega Nova. With this model, users start and stop the brewing process by pressing a button. There is no volumetric control, meaning you must manually manage the brewing time to achieve your desired coffee strength.

The Wega Nova EPU is available in various configurations:

  • Single group and Junior versions
  • 2-group and compact versions
  • 4-group espresso machine

These machines can operate on 120V, 230V, or 400V power, making them versatile for different electrical setups.

Wega Nova EVD

The Wega Nova EVD shares many similarities with the EPU version but comes equipped with volumetric dosing. This means that users can select their desired coffee type from a touch panel, and the machine will automatically stop the brewing process once the required amount of water has been dispensed. This feature ensures consistency in every cup of coffee and is more user-friendly for busy cafes or restaurants.

Like the EPU model, the Wega Nova EVD is available in multiple versions:

  • Single group and Junior versions
  • 2-group and compact versions
  • 4-group espresso machine

These models also support 120V, 230V, and 400V power configurations.

Wega Nova Spare Parts from Brooks

At Brooks Parts, we supply a wide range of parts for the Wega Nova espresso machine, whether you're using the Leva, EPU, or EVD versions. From boiler components to brewing group parts, we have everything you need to keep your Wega Nova running smoothly. If you're unsure which parts you need, feel free to contact us for assistance.