Filter by
Manufacturers
Type part
more... less
Type
Price
Filter

Wega Nova

Wega Nova Espresso Machine Parts

The Wega Nova is one of the older models in the Wega espresso machine lineup, and despite its age, it remains in production today. This model has been updated both technically and aesthetically over time. The Wega Nova is available in several versions, including the Wega Nova Leva, Wega Nova EPU, and Wega Nova EVD.

Wega Nova espresso machine parts

Astoria/Wega water level nut 1/2" 12mm

This page shows the water level nut for a Astoria and Wega sight glass. This nut makes sure that the sight glass stays in place and seals properly. If the nut is screwed down the sight glass seal will slightly compress and seal off the sight glass. The part number for this item is for Astoria is 25383 and for Wega WY25383  This sight glass nut...
€8.38
Quick-view

Faema E61 group valve guide 11mm

This model small brass square pin can be found in the oldest E61 brewing groups, the ones used on the Faema E61. This specific model can only be used on Faema E61 models and the ones used on Wega espresso machines. The Faema part reference for this item is 4161135915 and for Wega the part references are W10341 and WY27421013. This brass square...
€1.83
Quick-view

Astoria/Wega Safety valve cover

The item on this product page is a safety valve protective cover, if the safety valves opens this valve will drain the water coming out of the valve to the drain. This cover is a OEM/Original Astoria CMA spare part, so you can use this item on various espresso machine brands such as Astoria and Wega. The Astoria part reference number is 56009980 and the...
€19.64
Quick-view

Bremas main switch 20A 690V

The Bremas main switch on this page is used on coffee grinders as well on espresso machines. You will find this model switch on the brands Mazzer, Astoria and Wega. The list of part references can be found in the extra info tab. This Bremas selector switch is rated up to 20A at 690V. This switch has 2 positions 0-1. The switch does not come with a knob....
€80.99
Quick-view

Astoria and wega level glass cover painted white

On this page you will find a body part suitable for espresso machines made by the Italian company Astoria CMA. This piece of pressed metal goes behind the sight glass to make the water level more visible. This item can be used on Astoria and Wega espresso machines. The Astoria part number is 44002 and the Wega part number is WY44002. This...
€13.95
Quick-view

Faema E61 small square rod 6mm

This model small brass square pin can be found in the oldest E61 brewing groups, the ones used on the Faema E61. This specific model can only be used on Faema E61 models and the ones used on Wega espresso machines. The Faema part reference for this item is 4161135916 and for Wega the part reference is W10349  This brass square pin has been...
€1.44
Quick-view

Half nut M26x1.5 brass

The product on this page is a hexagonal brass nut used on the steam and water valves on Astoria and Wega espresso machines. The Astoria part number for this item is 25384 and the Wega number is WY25384  The main components of a Wega and Astoria steam wand are the valve body and the shaft assembly. The shaft assembly is screwed into the body...
€4.56
Quick-view

Double scale boiler pump manometer 0 - 2.5 / 0 -16 bar

On this product page you will find a double pressure gauge. This pressure gauge can mainly be found on espresso machines such as Astoria and Wega. The Astoria part reference for this manometer is 1245504 and for Wega the part reference is WY21107  The manometer has on one side the boiler pressure, this goes from 0 to 2,5bar. The other side has the...
€46.36
Quick-view

Astoria Wega steam valve gasket holder

This steam and water tab gasket holder can be used in almost every steam and water valve used by the espresso machine manufacturer Astoria CMA. This item can be found in Astoria espresso machines with part reference 25616 and with Wega espresso machines under the reference WY25616. This gasket holder has on one side room for the flat gasket with the...
€9.43
Quick-view

Astoria Wega valve nut

This brass nut you will find on almost every steam and water valve of the Astoria CMA group. This brass nut holds the steam and water valve shaft in place inside the gasket holder. The Astoria part reference for this item is 25461 and the Wega part reference for this item is WY25461  You can find this item basically on every model like the Astoria...
€5.50
Quick-view

Astoria heating element 2 group 2600W 230V

The heating element on this page is one of the more common heating elements used with Astoria and Wega espresso machine boilers. The Astoria part number is 17051 and the Wega part number for this element is WY17051  The heating element on this page produces 2600W at 230/240V. the heating elements has 4 connecting poles. In between these...
€107.13
Quick-view

Astoria/Wega flat copper gasket 8,5x5x1mm

The copper washer on this page is used on the espresso machines of Astoria CMA. So on Astoria and Wega espresso machines. The Astoria part refence number is 12155. For Wega it is 560328 and WY12155. This item is a OEM/original Astoria/Wega spare part. This copper gasket has a outer diameter of 8,5mm a inner diameter of 5mm and a thickness of 1mm. This...
€0.39
Quick-view

Astoria/Wega Safety valve cover base

The item on this product page is a safety valve protective cover, if the safety valves opens this valve will drain the water coming out of the valve to the drain. This cover is a OEM/Original Astoria CMA spare part, so you can use this item on various espresso machine brands such as Astoria and Wega. The Astoria part reference number is 56009980 and the...
€3.10
Quick-view

Astoria Wega tap joint spring 11,4x16mm

The compression spring on this page is mainly used with the steam and water valves on the Astoria and Wega espresso machines. But it has also multiple purposes in the steam valve. This item is a OEM/Original item. The Astoria part number is 10452 and the Wega part number is WY10465. This compression spring is used to put pressure on the shaft gasket...
€2.02
Quick-view

Astoria Argenta stainless steel steam pipe

The steam wand on this page is suitable for a variety of Astoria espresso machines. This part has the Astoria part number 25763116. The stainless-steel steam tube has a diameter of 8mm. The steam tube itself comes with a rubber heat protector, so you won’t burn your fingers while holding the steam wand. The stainless-steel steam stem has a...
€68.77
Quick-view

Astoria Wega steam water valve body

The article on this page is a steam and water valve body for Astoria and Wega espresso machines. This item has been casted and machined out of brass. The Astoria Reference is 53003 and the Wega reference is WY53003. The casted steam and water valve has multiple threads machined into it. The inlet thread is a 3/8” BSP-G and the connection for the...
€24.26
Quick-view

RPM clamp ring motor 330W 220/240V 50/60Hz

This RPM motor pump(model number C042204) is one of the more uncommon espresso machine pumps used. The cooling of this motor occurs by running the water which comes out of the pump true the motor to cool it down. This type of coffee machine pump is only used by the Astoria CMA group, so you would only see them on Astoria CMA and Wega espresso machines....
€190.64
Quick-view

Wera shower screen screwdriver philips

It is quite common on espresso machines that the shower screen in the brewing group is attached with a screw. The issue is that the space between the brewing group and the drip tray is quite often too little for a normal screwdriver. For that reason we have the Wera short version screwdrivers. This specific model is suitable to use in combination with a...
€12.87
Quick-view

Astoria Wega switch 0-2 25A 690V

On this page you will find a main power switch for a astoria or a wega espresso machine. This specific switch has been manufactured by the Italian company Bremas, the part number is CS0177412. The Astoria part number for the item is 18104 and for Wega is the part number WY18104  The selector switch has a 0-1-2 positioning. The maximum amperage...
€100.68
Quick-view

Astoria Wega drain tray ø 80mm

The drain tub on this page is one of the most commonly used ones on Astoria and Wega espresso machines. The part is a OEM/Original spare part for Astoria and Wega espresso machines. The Astoria part number is 15502 and the Wega part number is WY15502. This drain cup has been made from a plastic. The outer diameter of the cup is 80mm. The hose connection...
€8.71
Quick-view

Astoria/Wega electronic box 1-3 gr SB/GL 230V

On this page you will find a OEM/Original Astoria CMA electronic box for various models of Astoria and Wega. The Astoria code for this part is 18090048  and the Wega part number is WY18090048  The dosing control unit SB/GL “2004”PLUS1, runs on 230V at 50/60Hz. It is suitable for 1 – 3 brewing groups. This dosing device is...
€504.14
Quick-view

Models Available in the Wega Nova Series

  • Wega Nova Leva
  • Wega Nova EPU
  • Wega Nova EVD

Wega Nova Leva

The Wega Nova Leva is the lever-operated version of the Wega Nova. In this model, brewing pressure is not generated by a pump but through a manually operated compression spring. This traditional method is highly regarded by espresso enthusiasts who prefer manual control over their brewing process. If you're looking for more information or parts for lever-operated machines, we recommend visiting our dedicated site, Brooks-espressomachines, which focuses on lever espresso machines.

Wega Nova EPU

The Wega Nova EPU is the basic manual version of the Wega Nova. With this model, users start and stop the brewing process by pressing a button. There is no volumetric control, meaning you must manually manage the brewing time to achieve your desired coffee strength.

The Wega Nova EPU is available in various configurations:

  • Single group and Junior versions
  • 2-group and compact versions
  • 4-group espresso machine

These machines can operate on 120V, 230V, or 400V power, making them versatile for different electrical setups.

Wega Nova EVD

The Wega Nova EVD shares many similarities with the EPU version but comes equipped with volumetric dosing. This means that users can select their desired coffee type from a touch panel, and the machine will automatically stop the brewing process once the required amount of water has been dispensed. This feature ensures consistency in every cup of coffee and is more user-friendly for busy cafes or restaurants.

Like the EPU model, the Wega Nova EVD is available in multiple versions:

  • Single group and Junior versions
  • 2-group and compact versions
  • 4-group espresso machine

These models also support 120V, 230V, and 400V power configurations.

Wega Nova Spare Parts from Brooks

At Brooks Parts, we supply a wide range of parts for the Wega Nova espresso machine, whether you're using the Leva, EPU, or EVD versions. From boiler components to brewing group parts, we have everything you need to keep your Wega Nova running smoothly. If you're unsure which parts you need, feel free to contact us for assistance.