Filter by
Manufacturers
Type part
Type
Price
Filter

ECM Classika PID: Precision Espresso Making at Home

The ECM Classika PID is an advanced espresso machine designed for home baristas who demand precision and quality. While it shares similarities with the ECM Classika II, the Classika PID stands out with its integrated PID temperature controller. This allows for more accurate temperature control compared to the manual thermostat found on the Classika II, making it ideal for those looking for consistent, high-quality espresso shots.

ECM Classika PID Espresso Machine – Precision and Qualit

Faema E61 valve gasket 15,5x7,5x4mm

This gasket is again such a standard type of gasket in the world of espresso coffee machines. It is the EPDM gasket 15.5x7.5x4mm. This gasket is used a variety of applications on espresso machines. Offcourse on the Faema E61 brewing group as well for the E61 style brewing group, as the camme shaft gasket. By brands like Isomac, Bezzera, ECM, Brasilia,...
€0.74
Quick-view

E61 shower screen old style 60mm

This article is one of the earliest designs of the 60mm shower screen. This shower screen is made by IMS CFDR070.  The border diameter is 60mm, it has a internal height of 15,7mm. The internal holes, 112 in total, have a diameter of 2mm Note: this is not a specialty coffee shower, but IMS also produces normal showers. This is, unlike other 60mm models, a...
€4.29
Quick-view

Portafilter gasket 73x57x8mm

The portafilter gasket on this page can be used on various espresso machine models such as ECM Heidelberg, La Pavoni, Rocket and Wega. The part references for this item are for La Pavoni 361014, for ECM Heidelberg C449900229 , for Rocket C449900229 and for Wega W10321/ WY12227  This portafilter gasket has been made from NBR with shore 75. This portafilter...
€3.95
Quick-view

Solenoid valve silicone o ring 6,07x1,78mm

This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal diameter...
€0.66
Quick-view

PTFE gasket 26x21x2mm

This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....
€1.38
Quick-view

PTFE gasket 35x30x2mm

The gasket on this page is a Polytetrafluoroethylene (PTFE) gasket with the dimensions 35x30x2mm. This specific gasket is used on 3 specific places on the E61 style brewing group (the Faema E61 and Faema E61 legend group use a different size of ptfe gasket). It is used to seal off the top trumpet or drain sleeve, on the side of the group the camme holder...
€1.47
Quick-view

Ulka Vibration pump EX5 230V 50/60Hz with brass outlet

On this page you will find one of the most used espresso machine pumps. The Ulka Ex5 48W 230V espresso machine vibration pump. This pump produces 48W at 230V with 50Hz. The inlet connection is 6mm, suitable for a silicone hose. The pump outlet is a 1/8” Bsp, this side is made from brass. There is also a Identical pump the Ulka EP5, this one has a plastic...
€26.74
Quick-view

Stainless steel filter 8.6x22.5mm

The item on this product page is a stainless steel water filter, this filter is used with various espresso machine brands in the top of the brewing group. You can find this filter with brands such as ECM Heidelberg, San Remo, Vibiemme, La Scala, Bezzera, Grimac, Astoria, La Pavoni and wega. This stainless steel water filter has a outer diameter of 8,5mm...
€3.47
Quick-view

E61 style group spout breaker

On this page you will find a brewing group spray nozzle. This nozzle is one of the most used spay nozzles used in the world of espresso machines. The nozzle has a outer diameter of 30mm and the male thread, which threads into the brewing group, is M10x1mm. What is the purpose of having a nozzle. Well the spray nozzle is located above the shower screen....
€6.37
Quick-view

Drain valve assembly

The drain valve is responsible for draining the last water out of the E61 style brewing group. This espresso machine part is made up out of 4 parts. The gasket holder, the gasket, small brass washer and a triangular valve rod. The total length of this part is 27mm. This drain valve used in a variety of espresso machine brands like: Expobar CTAV1-05,...
€8.99
Quick-view

Brewing group gigleur 0.6mm

This nozzle/gigleur is installed primarily in the brewing group on a espresso machine. It has a hole diameter 0,6mm. There are a variety of diameters available. The thread used on the part is a male M6 with a pitch of 0,75mm. The thread pitch can vary between 0,75mm and 1mm keep that in mind. But also the diameter of the nozzle can vary, so expect when...
€1.58
Quick-view

Cafelat blue silicone portafilter gasket 73x57x8,5mm

This size of portafilter gasket is the most common portafilter gasket you will find. This size can be used on the e61 style of brewing groups. You can use them on brands such as Faema, San Remo, Vibiemme , ECM, La Pavoni, Wega, Rocket and so on. This gasket is made by the HongKong based company Cafelat. This gasket is made from food graded blue silicone....
€4.88
Quick-view

Faema E61 group infusion spring

On this page you will find a stainless steel compression spring with a outer dimension of 14mm and a length at rest of 45mm. This compression spring is being used in a variety of espresso machine brewing groups. This ranges from the famous Faema E61 brewing group, the E61 style brewing group. But also a variety of other type of brewing groups used by...
€1.62
Quick-view

E61 style camme rod

This camme rod for E61 style espresso machines is slightly different then the one used in the Faema E61. This one has a small guide pin at the end which goes inside the group. On the other side there is a squared off section for the lever arm. This section is 6x6mm. To hold the lever in place there is a M6 thread on the end for some sort of a nut. This...
€20.25
Quick-view

Drain valve pre-assembled 52,8mm

The drain valve on this page is used in a variety of E61 style of brewing groups. You will find this model of drain valve assembly on brands such as Bezzera, ECM Heidelberg, Isomac, La Pavoni, Brasilia, Grimac and Royal. This drain valve comes pre-assembled. The assembly contains the triangular shaped shaft, gasket holder, gasket, flat washer and the...
€15.01
Quick-view

Compression spring 13x42mm

This stainless steel compression spring is used in the Faema E61 and E61 style brewing groups. But what does this specific do? Well this is the last compression spring in the brewing group. It is the compression spring in the brewing valve which closes the exhaust valve all the way at the bottom of the E61 brewing group. Besides the E61 group spring it is...
€2.02
Quick-view

AFM 34 gasket 26x21x2mm

This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....
€1.16
Quick-view

Faema E61 camme spring 15x25mm

This stainless steel compression spring with the dimensions of 15x25mm is normally used as a camme spring on a Faema E61 brewing group or on E61 style brewing groups.  Like with the Faema E61, Faema E61 legend, Grimac, Isomac, Pavoni, Wega and a variety of other brands which use a e61 style of brewing group. Besides that option, this model compression...
€1.52
Quick-view

O ring gasket 32,93x2,62mm FKM

The o ring on this product page can be used on a variety of espresso machine brands and in various applications. You can find this o ring on brands such as ECM Heidelberg, La Scala, Bezzera, Cimbali, Grimac, La Spaziale, Brasilia and Gaggia. With applications such as water and steam valves and on brewing groups. The part references codes can be found in...
€2.87
Quick-view

Wera shower screen screwdriver slotted

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...
€13.54
Quick-view

E61 style group drain valve disk

The drain valve disc on this product page is only used in a few E61 style of brewing groups. You can find them with espresso machine brands such asLa Scala, Bezzera, ECM Heidelberg, La Pavoni, Rocket, Grimac and Isomac. This brass disc can be found at the bottom of the drain of various e61 groups. The brass disc has a outer diameter of 15mm and 8mm. the...
€3.48
Quick-view

Bezzera pump manometer 40mm 0-16bar

On this product page you will find a pump pressure gauge which can be used with various brands such as Bezzera and ECM Heidelberg. The part reference for Bezzera is 7432523 and for ECM Heidelberg is B7432517  This pump pressure gauge goes from 0 to 16 bar. The case of this manometer has a diameter of 39mm, the frame is 44mm. The connection at the back is...
€24.89
Quick-view

Faema E61 sleeve

On this page you will find a camme guide bushing. This part is a generic part for Faema E61 brewing groups and the brewing groups made in the E61 style. This part is made from brass with a total length of 28mm, the outer dimensions are 15 and 10 mm. The ID is 8mm and the head of the bushing has a thickness of 5mm. This part slides over the shaft off the...
€3.16
Quick-view

IMS filter basket removal tool

When you want to clean your portafilter at the end of the day you need to remove the filter basket from the portafilter. But these baskets are normally held in place with the internal spring and can be difficult to remove. Instead of removing the basket with a spoon IMS Filtri has made a filter basket removal tool. This tool is made from stainless steel....
€9.97
Quick-view

PID Control and Boiler

The ECM Classika PID is equipped with a small vertical boiler powered by a 1000W heating element, available in both 110V and 230V configurations. The major difference from the Classika II is the PID controller, which allows users to set the boiler water temperature with great precision, ensuring more consistent brewing results. The machine is perfect for those who want to fine-tune their espresso shots to perfection. If you ever need spare parts for the boiler system, you can visit the ECM Classika PID Boiler and Group page for replacement components.

Brewing Group

Like many high-end espresso machines, the ECM Classika PID is fitted with the iconic E61 brewing group. This manual group offers great control over the espresso extraction process. However, it's important to note that not all components are compatible with other E61-style brewing groups, so make sure to use the correct spare parts when needed. For brewing group replacements or maintenance, you can check out the ECM Classika PID Brewing Group page.

Steam and Water Valve

The ECM Classika PID, while compact, also features a steam valve for frothing milk, allowing users to create milk-based beverages like cappuccinos and lattes. However, like the Classika II, it does not have a dedicated water spout, which is a trade-off for its smaller size. If you ever need parts for maintaining or replacing the steam or water valve, head over to the ECM Classika PID Steam/Water Valve page.

Compact and Efficient Design

The ECM Classika PID is ideal for those with limited space but who still want a high-performance machine. Its compact size and reliance on a water tank rather than a direct connection make it versatile for home use. Despite its smaller footprint, the machine delivers exceptional espresso thanks to its precise temperature control and reliable brewing system.

Conclusion

For home baristas looking for precision, consistency, and control, the ECM Classika PID is a fantastic choice. With its PID controller, manual E61 brewing group, and compact design, this machine ensures you can enjoy café-quality espresso from the comfort of your home. Don’t forget to visit the Brooks Parts website if you need any replacement parts for your ECM Classika PID.