Filter by
Price
€ €
Type part
more... less
Type
Filter

ECM coffee machine parts

ECM espresso machine parts

ECM espresso machine parts| Brooks-parts.com
O ring 3.69x1.78mm viton O ring 3.69x1.78mm viton

O ring 3.69x1.78mm FKM

The item on this product page is one of the smaller sizes of o rings. This o ring can be used with various brands such as La Spaziale, La Scala, Carimali, Gaggia and La Pavoni. This o ring has been made from the gasket material FKM. The cord diameter of this o ring is 1,78mm and the internal diameter is 3,69mm. This o ring has been made in Italy. You can...
€0.52
Quick-view
Safety valve 3/8" 2.0 bar CE PED IV certified Safety valve 3/8" 2.0 bar CE PED IV certified

Safety valve 3/8" 2.0 bar CE PED IV certified

The most important part on a espresso machine is the safety valve. This part prevents that a boiler can explode. The safety valve will open up when the pressure inside the boiler becomes too high. This specific safety valve is made out of brass. The thread type used for this safety valve is 3/8”BSP-G. The calibrated pressure of the valve is 2.0 bar, this...
€10.47
Quick-view
Heating element gasket PTFE 42x33x3mm Heating element gasket PTFE 42x33x3mm

Heating element gasket PTFE 42x33x3mm

On this page you will find a PTFE heating element gasket is suitable for a variety of brands such as ECM Heidelberg and Bezzera This heating element gasket has a outer diameter of 42mm a inner diameter of 33mm and a thickness of 3mm. This size of gasket is suitable for a 1” screw in heating element.
€3.40
Quick-view
Stainless steel filter 8.6x22.5mm Stainless steel filter 8.6x22.5mm

Stainless steel filter 8.6x22.5mm

The item on this product page is a stainless steel water filter, this filter is used with various espresso machine brands in the top of the brewing group. You can find this filter with brands such as ECM Heidelberg, San Remo, Vibiemme, La Scala, Bezzera, Grimac, Astoria, La Pavoni and wega. This stainless steel water filter has a outer diameter of 8,5mm...
€3.47
Quick-view
Ring group gasket o ring 47.29x2.62mm Ring group gasket o ring 47.29x2.62mm

Ring group gasket o ring 47.29x2.62mm

The o ring on this product can be used on various espresso machine brands such as San Remo, Elektra, Spaziale, Victoria Arduino and Brasilia. The part reference numbers can be found in the extra info tab on this product page. This o ring is made from EPDM. The cord diameter is 2,62mm, the internal diameter is 47,30mm. This item has been made in Italy....
€3.40
Quick-view
Gicar flowmeter 1/4D 1,15 connector with led Gicar flowmeter 1/4D 1,15 connector with led

Gicar flowmeter 1/4D 1,15 connector with led

The flowmeter on this page is one of the most commonly used flowmeters in espresso machines. This flowmeter has been manufactured by the Italian company Gicar, so also made in Italy. In the extra field tab next to this text you will see a entire list of compatibilities with other models and brands. This specific flowmeter does not come with a fixed wire,...
€48.87
Quick-view
Solenoid valve screw M4x10 Solenoid valve screw M4x10

Solenoid valve screw M4x10

The product on this page is a Allen head screw for attaching a solenoid valve to a other surface. This type is a M4x10mm. It is a stainless-steel bolt according to UNI 5931 - DIN 912 - ISO 4762 You will only need this type of Allen head screw to attach the flanged solenoid valves to a flat surface. This type of Allen screw is used in a lot of espresso...
€0.79
Quick-view
E61 style group spout breaker E61 style group spout breaker

E61 style group spout breaker

On this page you will find a brewing group spray nozzle. This nozzle is one of the most used spay nozzles used in the world of espresso machines. The nozzle has a outer diameter of 30mm and the male thread, which threads into the brewing group, is M10x1mm. What is the purpose of having a nozzle. Well the spray nozzle is located above the shower screen....
€6.37
Quick-view
Gasket 13x4x4mm FKM Gasket 13x4x4mm FKM

Gasket 13x4x4mm FKM

The gasket on this product page can be used on various espresso machine brands such as Faema and Rancilio. It is used in brewing groups, water inlet valves and steam and water valves. The Faema part reference for this item is 2151136654  and for Rancilio the reference is 36302002.  This gasket is made from FKM. The outer diameter is 14mm, the inner...
€1.48
Quick-view
Faema E61 expansion valve gasket Faema E61 expansion valve gasket

Expansion valve gasket 15/6x10mm

The expansion valve gasket shown on this page is a generic item. You can find it in the catalogue of a variety of espresso machine manufacturers. The gasket is a flat NBR gasket with a pin at the end. The widest section of the gasket has a diameter of 15mm and the pin has a diameter of 6mm. The total height for the gasket is 10mm. Which espresso machine...
€1.68
Quick-view
Safety valve 3/8" 1,8bar CE PED IV Safety valve 3/8" 1,8bar CE PED IV

Safety valve 3/8" 1,8bar CE PED IV

The boiler safety valve shown on this page can mainly be found on La Pavoni espresso machine boilers. The La Pavoni part reference for this item is 395221G This boiler safety valve has a male 3/8” BSP-G thread. The pre-set pressure is 1,8 bar and nonadjustable. The seal used is a FKM seal, when opened the steam outlet is 872 L/M. This valve is CE and PED...
€13.27
Quick-view
Drain valve assembly Drain valve assembly

Drain valve assembly

The drain valve is responsible for draining the last water out of the E61 style brewing group. This espresso machine part is made up out of 4 parts. The gasket holder, the gasket, small brass washer and a triangular valve rod. The total length of this part is 27mm. This drain valve used in a variety of espresso machine brands like: Expobar CTAV1-05,...
€8.99
Quick-view
Brewing group gigleur 0.6mm Brewing group gigleur 0.6mm

Brewing group gigleur 0.6mm

This nozzle/gigleur is installed primarily in the brewing group on a espresso machine. It has a hole diameter 0,6mm. There are a variety of diameters available. The thread used on the part is a male M6 with a pitch of 0,75mm. The thread pitch can vary between 0,75mm and 1mm keep that in mind. But also the diameter of the nozzle can vary, so expect when...
€1.58
Quick-view
Portafilter gasket 72,7x57x8mm orange silicone Portafilter gasket 72,7x57x8mm orange silicone

Portafilter gasket 72,7x57x8mm orange silicone

The portafilter gasket shown on this page can be used on a variety of espresso machines which use for instance a E61 style of brewing group. But this gasket hasn’t been made from the traditional NBR, but from orange food grade silicone.  You can use this portafilter gasket on various brands such as San Remo, La Scala, Vibiemme, Bezzera, Faema and La...
€5.65
Quick-view
O ring gasket 6x1.2mm O ring 6x1.2mm epdm

O ring gasket 6x1.2mm

The o ring on this page is used to seal off the steam tip from the steam wand at the bottom. You can find this o ring with a variety of brands like Spaziale, Astoria and Wega espresso machines. With the part numbers of Spaziale 08354, Astoria 12300013 and Wega WY12300013. This o ring has a cord diameter of 1,2mm and a internal diameter of 6mm. The o...
€1.38
Quick-view
Gasket PTFE 22x16x2mm Gasket PTFE 22x16x2mm

Gasket PTFE 22x16x2mm

This a universal Polytetrafluoroethylene (PTFE) gasket with 22x16x2mm. The gasket is used on a variety of espresso machine components. This type of gasket found boilers, brewing group and valve assemblies. The most common location for this to seal off the 3/8” male nut on the top of the Faema E61 and E61 style brewing groups like with Bezzera, Brasilia,...
€0.86
Quick-view
Heating element gasket PTFE 57x43x3mm Heating element gasket PTFE 57x43x3mm

Heating element gasket PTFE 57x43x3mm

On this page you will find a PTFE heating element gasket is suitable for a variety of brands such as Victoria Arduino, Grimac, Astoria, Faema and San Remo. This heating element gasket has a outer diameter of 57mm a inner diameter of 43mm and a thickness of 3mm. This size of gasket is suitable for a 1”1/4 screw in heating element.
€3.40
Quick-view
Shower with net and rays caulked 60mm Shower with net and rays caulked 60mm

Shower with net and rays caulked 60mm

The shower screen on this page is one of the most commonly espresso machine shower screens used in commercial espresso machines. For instance on all E61 types of brewing groups. This specific shower screen has been made by the Italian company IMS Filtri. The IMS part reference for this item is IMSDR306. Note: this is not a competition shower screen. This...
€4.10
Quick-view
Crushable copper washer 1/4" 18x14x2mm Crushable copper washer 1/4" 18x14x2mm

Crushable copper washer 1/4" 18x14x2mm

The item on this product page is a crushable copper gasket. This gasket can be used with a variety of espresso machine brands such as Casadio, ECM Heidelberg, La Scala, Cimbali, Faema, Astoria, Nuova Simonelli, Pavoni, Wega and Rancilio. This crushable copper gasket has a outer diameter of 18mm a inner diameter of 14mm and a thickness of 2mm. This gasket...
€1.19
Quick-view
O ring 20.63x2.62mm viton O ring 20.63x2.62mm viton

O ring 20.63x2.62mm viton

On this page you will find a o ring which has a cord diameter of 2,62mm and a internal diameter of 20,63mm. the material for this o ring is Viton. The application in espresso machines for this o ring is really broad. This ranges from application in brewing groups with brands like ECM Heidelberg, la Scala, Bezzera and Brasilia. But also the application in...
€2.95
Quick-view
Brooks Cafelat blue silicone portafilter gasket 73x57x8,5mm Brooks Cafelat blue silicone portafilter gasket 73x57x8,5mm

Cafelat blue silicone portafilter gasket 73x57x8,5mm

This size of portafilter gasket is the most common portafilter gasket you will find. This size can be used on the e61 style of brewing groups. You can use them on brands such as Faema, San Remo, Vibiemme , ECM, La Pavoni, Wega, Rocket and so on. This gasket is made by the HongKong based company Cafelat. This gasket is made from food graded blue silicone....
€4.88
Quick-view
Anti vacuum valve 1/4" Anti vacuum valve 1/4"

Anti vacuum valve 1/4"

A Anti vacuum valve is used to prevent that the pressure switch is kicked in too early when heating up. This anti vacuum valve has a male screw thread of ¼” BSP. A anti vacuum valve exists out of multiple components. The body with the threads, in this case made from stainless steel. The plunger, made from brass. This plunger has also the gasket on it,...
€9.77
Quick-view
Faema E61 group infusion spring 14x45mm Faema E61 group infusion spring 14x45mm

Faema E61 group infusion spring

On this page you will find a stainless steel compression spring with a outer dimension of 14mm and a length at rest of 45mm. This compression spring is being used in a variety of espresso machine brewing groups. This ranges from the famous Faema E61 brewing group, the E61 style brewing group. But also a variety of other type of brewing groups used by...
€1.62
Quick-view