Filter by
Price
€ €
Type part
more... less
Type
Filter

ECM coffee machine parts

ECM espresso machine parts

ECM espresso machine parts| Brooks-parts.com
O ring gasket nbr 8,9x1,9mm O ring gasket nbr 8,9x1,9mm

O ring gasket nbr 8,9x1,9mm

This O ring in nbr with the specifications 8,9x1,9mm. Makes sure that the brass non return valve seals against the body of the non return valve. Return to the Faema E61 valve parts overview
€0.59
Quick-view
Lucifer solenoid 3 way base mounting 220/240V 50/60Hz Lucifer solenoid 3 way base mounting 220/240V 50/60Hz

Lucifer solenoid 3 way base mounting 220/240V 50/60Hz

The solenoid valve on this page is a 3 way solenoid valve, mainly with the application as a brewing group solenoid valve.  Parker has listed this part under 471012 and 471013 The coil used on this solenoid valve is a 9W 220/240V which runs on 50/60Hz. The coil number for this solenoid valve is 483510S6 The valve in question is a 3 way solenoid valve with...
€98.45
Quick-view
Parker 3 way solenoid valve 220/230V Parker 3 way solenoid valve 220/230V 50/60Hz conical

Parker 3 way solenoid valve 220/230V

This 3 way solenoid valve is one of the most commonly found solenoid valves. The part is produced by Parker in Italy. This valve is mainly used as a brewing group solenoid valve. The remaining water from the group comes out of the outlet at the top. The Parker part numbers for this item are 393107J and 393112J This solenoid valve is a 3 way valve. The...
€83.33
Quick-view
E61 style camme rod Vibiemme brass lever rod

E61 style camme rod

This camme rod for E61 style espresso machines is slightly different then the one used in the Faema E61. This one has a small guide pin at the end which goes inside the group. On the other side there is a squared off section for the lever arm. This section is 6x6mm. To hold the lever in place there is a M6 thread on the end for some sort of a nut. This...
€20.25
Quick-view
Locking group gasket Locking group gasket

Locking group gasket

If you want to attach a E61 style brewing group to the espresso machine there is normally a gasket inbetween the brewing group and metal frame. In this case a 2mm paper gasket with a width of 70 and a height of 80mm. This gasket type used on a variety of E61 style brewing groups from the brands: San Remo, Royal, Reneka, La Scala, Vibiemme, Grimac, Wega,...
€5.04
Quick-view
Compression spring 14x33mm Compression spring 14x33mm

Compression spring 14x33mm

This stainless steel spring 14x33mm is used in a variety of locations in a espresso machine. The most common location for this compression spring is in a Faema E61 brewing group of a E61 style brewing group. The spring seats inside the top trumpet and makes sure that the top brewing valve closes when the brewing process is stopped, and the lever has been...
€2.17
Quick-view
Filterbasket 2 coffee 12gr 70x21mm Filterbasket 2 coffee 12gr 70x21mm

Filterbasket 2 coffee 12gr 70x21mm

The 2 coffee filterbasket on this page can be used a big variety of espresso machine brands. You can use this basket on brands such as Casadio, Brugnetti, ECM Heidelberg, San Remo, Faema, Vibiemme, La Scala, Grimnac. This filterbasket has been made by the Italian company IMS Filtri. The IMS part reference is CF2T068. Note: this is not a competition...
€5.69
Quick-view
IMS Faema double cup filterbasket 12/18gr IMS Faema double cup filterbasket 12/18gr

IMS double filterbasket 12/18gr B702TH24.5M

A lot of the filterbasket sizes are quite standardized. This IMS filterbasket is good example of this. The basket is made by IMS filtra, but it is a competition basket and not from the standard IMS basket line.  The IMS part number for this double filterbasket is B702TH24.5M. The double filterbasket is made from stainless steel 304, food safe. The outer...
€25.48
Quick-view
Drain valve pre-assembled 52,8mm Drain valve pre-assembled 52,8mm

Drain valve pre-assembled 52,8mm

The drain valve on this page is used in a variety of E61 style of brewing groups. You will find this model of drain valve assembly on brands such as Bezzera, ECM Heidelberg, Isomac, La Pavoni, Brasilia, Grimac and Royal. This drain valve comes pre-assembled. The assembly contains the triangular shaped shaft, gasket holder, gasket, flat washer and the...
€15.01
Quick-view
Heating element 1200W 230V Heating element 1200W 230V

Heating element 1200W 230V

The heating element on this product page can be found on various espresso machine brands such as Rocket and ECM Heidelberg. The rocket part reference is C199901551 and for ECM it is C199901551. This heating element produces 1200W at 230V and there are 2 connecting poles. The immersed depth is 130mm. the heating element flange is a screw in type and has a...
€62.08
Quick-view
Faema/Casadio PTFE gasket 27x20x1mm Faema/Casadio PTFE gasket 27x20x1mm

Faema/Casadio PTFE gasket 27x20x1mm

On this product page you will find a flat PTFE gasket which can be used in various applications on Faema and Casadio espresso machines. This flat PTFE gasket can be used in brewing group applications and water and steam valves. The Casadio part reference for this item is 4701116694, the Faema part reference is identical to this number. This ptfe gasket...
€1.66
Quick-view
Compression spring 13x42mm Compression spring 13x42mm

Compression spring 13x42mm

This stainless steel compression spring is used in the Faema E61 and E61 style brewing groups. But what does this specific do? Well this is the last compression spring in the brewing group. It is the compression spring in the brewing valve which closes the exhaust valve all the way at the bottom of the E61 brewing group. Besides the E61 group spring it is...
€2.02
Quick-view
AFM 34 gasket 26x21x2mm AFM 34 gasket 26x21x2mm

AFM 34 gasket 26x21x2mm

This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....
€1.16
Quick-view
Anti vacuum valve 1/4" stainless steel Anti vacuum valve 1/4" stainless steel

Anti vacuum valve 1/4" stainless steel

The anti-vacuum valve on this page can be used on various espresso machine models of the brand San Remo. The anti vacuum valve has the San Remo part reference of 10652040A  This anti vacuum valve has been made from stainless steel. The thread used is a male ¼” BSP-G thread. This stainless steel anti vacuum valve has been made in Italy and is NSF...
€11.87
Quick-view
O ring gasket EPDM 10.77x2.62mm O ring gasket EPDM 10.77x2.62mm

O ring gasket EPDM 10.77x2.62mm

The o ring on this page can be used in various applications in espresso machines. This ranges from water and steam valves, water inlet taps and water levels. The part on this page is a O ring made from the material EPDM. This o ring has a cord diameter of 2,7mm and a inner diameter of 12,1mm. This o ring is produced in Italy. You will find this o ring...
€1.55
Quick-view
Faema E61 group upper plug Faema E61 group upper plug

Faema E61 group upper plug

On the top of a Faema E61 brewing group or a E61 brewing group is always the final item. That’s a chrome plated 3/8” male plug. Nothing else nor something special. This is generic part which can also be used in a variety of situations then a E61 brewing group, but also on different locations on a espresso machine. Like on the boiler with a Vibiemme...
€5.14
Quick-view
Faema E61 spring non return valve Faema E61 spring non return valve

Spring non return valve 8x30mm

The non return valve is a key components in a espresso machine. This prevents that water doesn’t flow to places it isn’t intended to do so. This specific spring is used on a variety of espresso machines like Brasilia, Faema, Grimac, La Spaziale, Vibiemme and La Carimali. The spring has a external diameter of 8mm and a overall length of 30mm. If you are...
€1.03
Quick-view
Faema E61 camme spring Faema E61 camme spring

Faema E61 camme spring 15x25mm

This stainless steel compression spring with the dimensions of 15x25mm is normally used as a camme spring on a Faema E61 brewing group or on E61 style brewing groups.  Like with the Faema E61, Faema E61 legend, Grimac, Isomac, Pavoni, Wega and a variety of other brands which use a e61 style of brewing group. Besides that option, this model compression...
€1.52
Quick-view
Green pilot light 250V Green pilot light 250V

Green pilot light 250V

The item on this product page is a green indicator light, used on various domestic La Pavoni espresso machines. The La Pavoni part reference number for this item is IS000659 This indicator light is green. The head has a diameter of 20mm, the hole needs to have a hole of 10mm. This light is rated at 250V. Made in Italy This indicator light can be used on...
€5.22
Quick-view
Faema E61 steam/water group expanding spring Faema E61 steam/water group expanding spring

Faema E61 steam/water group expanding spring

Every valve needs to have return spring to close again. On this page you will find the return spring used in the Faema E61 steam and water valve. As well in their successors used in Vibiemme, Grimac and la Scala machines. This spring is made out of stainless steel and has an external diameter of 12,5mm and a length of 30mm. So, steam and water valves...
€2.25
Quick-view
Wera shower screen screwdriver slotted Wera shower screen screwdriver slotted

Wera shower screen screwdriver slotted

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...
€13.54
Quick-view
Stainless steel steam stem 4 holes 1,5mm Stainless steel steam stem 4 holes 1,5mm

Stainless steel steam stem 4 holes 1,5mm

On this page you will find a steam nozzle which can be used in combination with some models of Faema, Casadio and La Cimbali. The steam tube has a female 1/8”BSP-Gt thread. On each side of the steam tip there are 4 holes, all of them have a diameter of 1,5mm. There are 2 flattened spots on the nozzle, so that you are able to install a spanner on...
€9.08
Quick-view