Filter by
Type part
more... less
Faema
more... less
Type
Filter

Buying Spare Parts for Faema Espresso Machines

Finding the right spare parts for your Faema espresso machine is essential for maintaining its performance and longevity. Known for their innovative designs and unmatched quality, Faema machines—especially those featuring the iconic E61 brewing group—are a favorite among coffee enthusiasts and professionals alike. Whether you own a vintage lever-operated model or a modern Faema E61 Legend, we can help you find the exact parts you need to keep your machine running like new.

Faema espresso machine parts| Brooks-parts.com
Copper crushable washer 21x17x2mm Copper crushable washer 21x17x2mm

Copper crushable washer 23x17x3mm

On this page you will find a copper gasket, not just a copper gasket but a crushable version. This specific model has an outer diameter of 22mm an internal diameter of 17mm and a height of 3mm. Copper crushable washers can be used in various pump and boiler related applications. You need to tighten the fitting enough to crush the copper, which makes the...
€1.47
Quick-view
Fluid o tech vibration pump 70W 120V Fluid o tech vibration pump 70W 120V

Fluid o tech vibration pump 70W 120V

Fluid o tech is not only famous because of their rotation pumps. But also for their vibration pumps, this principle is the same as with the Ulka vibration pumps. But these pumps are a lot more durable. The part number for this part is 1106PAIFB2E0000. On this page you will find the 70W vibration pump which runs on 100/110V at 50/60Hz. These pumps can not...
€143.59
Quick-view
Flex pipe 2000mm 3/8 ff conical base Flex pipe 2000mm 3/8 ff conical base

Flex pipe 200cm 3/8 ff conical base

On this page you will find a stainless steel water hose. This hose can be used to connect the water mains to your espresso machine any other suitable appliance. This stainless steel flex hose has a overall length of 2000mm and on each end a 3/8” BSP-G fitting. This connection is conical so there is no need to a gasket. The maximum fluid temperature which...
€18.50
Quick-view
O-ring 17,17X1,78mm EPDM O-ring 17,17X1,78mm EPDM

O-ring 17,17X1,78mm EPDM

The o ring on this page is used on various models of the La Cimbali group. This EPDM o ring is used to seal off the water inlet flange on the water inlet. For Faema the part number 4701119817 is used and for Cimbali the part number 4701119817  This o ring has been made out of EPDM. The cord diameter is 1,78mm and the internal diameter of the o...
€2.26
Quick-view
Faema E61 Legend water level plastic cover Faema E61 Legend water level plastic cover

Faema and Cimbali water level plastic cover

On this page you will find a sight glass backing. This white sight glass backing used on espresso machines of the brand Faema and La Cimbali. The Faema part reference for this item is 4831132157 and for Cimbali the references are 4831-132-157 and 920-711-000. This sight glass base has a length of 80mm a width of 21mm and a height of 12mm. There are for...
€6.84
Quick-view
Faema E61 legend sight glass Faema E61 legend sight glass

Faema E61 legend sight glass

The sight glass on this page is different then the traditional tubular glass. This is a flat piece transparent level glass, note it is made from polycarbonate. This type of level glass can be used with various brands such as Faema, La Scala and La Cimbali. The Cimbali part references for this item are4831130683  and 4831-130-683. For Faema the part...
€9.77
Quick-view
Faema E61 camme holder Faema E61 camme holder

Faema E61 camme holder

The cam holder on this product page is a OEM/Original Faema spare part, no not a NOS. but a modern one. The Faema part reference for this spare part is 4152135911 This spare part has been made from machined brass. But that’s not the final step. After that it has been polished, nickel plated and finally chrome plated. This item has been made in...
€36.78
Quick-view
Faema E61 group spout breaker Faema E61 group spout breaker

Faema E61 group spout breaker

The fitting on this product page is the last fitting on various E61 style of brewing groups. The drain fitting. This item can be used on various brands which use the E61 group, such as Faema, Grimac, La Pavoni, Rocket and Wega. This drain fitting has been made from machined brass. Which has been polished, nickel and chrome plated. The thread on one side...
€9.31
Quick-view
Faema E61 group valve guide 11mm Faema E61 group valve guide 11mm

Faema E61 group valve guide 11mm

This model small brass square pin can be found in the oldest E61 brewing groups, the ones used on the Faema E61. This specific model can only be used on Faema E61 models and the ones used on Wega espresso machines. The Faema part reference for this item is 4161135915 and for Wega the part references are W10341 and WY27421013. This brass square...
€1.83
Quick-view
AFM34 gasket 36x30x2mm AFM34 gasket 36x30x2mm

AFM34 gasket 36x30x2mm

The gasket on this product page is used on the Faema E61 brewing groups and the E61 style of brewing groups such as with Rocket, La Scala, Grimac, la Pavoni and Wega. The part reference numbers for this gasket can be found in the extra info tab. This gasket is made from AFM34 from the company Victor Reinz. This gasket has good sealing properties, even...
€1.23
Quick-view
Safety valve 1/4" M 2.0 bar CE / PED Safety valve 1/4" M 2.0 bar CE / PED

Safety valve 1/4" M 1.8 bar CE / PED

The boiler safety valve on this page can be used on a variety of La Cimbali, Faema and Casadio espresso machines.  The part reference for Casadio is 532392500, for Cimbali it is 532392500/532-392-500  and for Faema it is 532392500. This boiler safety valve has a male ¼” BSP-G thread. The safety valve is not adjustable and set at 1.8 bar. The valve has...
€32.29
Quick-view
Parker solenoid valve 2 way 1/8" 220/240V Parker solenoid valve 2 way 1/8" 220/240V

Parker solenoid valve 2 way 1/8" 220/240V

On this page you will find a threaded 2 way solenoid valve. This solenoid valve is made by Parker, this item ahs been manufactured in Italy. This valve is mainly used as a boiler filling valve, due to the big size of Orifice. This valve has 2 female 1/8” BSP-G connections, the in as well as the outlet. The orifice of this valve is 2,5mm and the...
€97.05
Quick-view
Monophase thermostat 170° Monophase thermostat 170°

Monophase thermostat 170°

The single phase thermostat on this page can be used on various espresso machine models of the La Cimbali Group. This thermostat can be used on various La Cimbali, Casadio and Faema espresso machine models. This single phase thermostat goes to 170 degree Celsius. This model has a manual reset. The capillary is 900mm. The bulb has a diameter of 4mm and a...
€43.62
Quick-view
La Cimbali M39 stainless steel steam pipe La Cimbali M39 stainless steel steam pipe

La Cimbali M39 stainless steel steam pipe

On this page you will find a complete stainless steel steam tube for the La Cimbali M39 and La Cimbali M39 GT espresso machine. The part reference of this item matches the Cimbali part reference 985-748-000. This steam tube has been made from stainless steel. The tube itself has a diameter of 10mm, to protect your fingers from burning there is a rubber...
€45.21
Quick-view
Steam water valve shaft gasket holder Faema P4/No stop steam valve rod

Steam water valve shaft gasket holder

The item on this product page is a steam and water valve shaft, including gasket holder. This item can be used on various espresso machine brands such as Marzocco, San Remo, Vibiemme, La Scala, Faema, La Pavoni. The part reference numbers can be found in the extra info tab. This steam and water valve shaft has been made from low lead content brass. On...
€9.71
Quick-view
PTFE gasket 15x7.5x10.3mm PTFE gasket 15x7.5x10.3mm

PTFE gasket 15x7.5x10.3mm

On this page you see a steam and water valve bushing/gasket for various Faema espresso machine models the Faema part reference for this item is 4161132346. On one side of this PTFE seal is a conical shape, this is for the ball of the steam tube or water tube. The other side of this gasket is flat for the brass washer. There is a indendation to hold a o...
€2.43
Quick-view
adjustable expansion valve 3/8m 10-14 bar adjustable expansion valve 3/8m 10-14 bar

adjustable expansion valve 3/8m 10-14 bar

The item on this product page is a adjustable expansion valve. This valve is a generic spare part and can be used on various espresso machines. This expansion valve is made from brass. the fitting used is a 3/8” BSP-G thread. on the other side is a hose fitting for 10mm tubes. This expansion valve is adjustable with a range which goes from 10 to 14...
€25.48
Quick-view
Faema E92 boiler temperature probe Faema E92 boiler temperature probe

Faema E92 boiler temperature probe

The boiler temperature sensor/probe on this page can be used on various Faema espresso machines. The Faema part reference for this sensor is 3761132007. This temperature probe has a male ½” fitting. The bulb itself has a diameter of 10mm and a length of 36mm. This sensor has been made in Italy. You can use this temperature probe on various espresso Faema...
€45.21
Quick-view
Faema E61 boiler 1 group Faema E61 boiler 1 group

Faema E61 boiler 1 group

The boiler on this page can be used to replace the boiler on the Vintage E61 1 group espresso machines. NOT on the Faema E61 Legend or Faema E61 Jubilee. Nor it can be used as a replacement for the Stainless steel boilers used on the E61 vintage models. The tubing is different. This boiler is made from copper with brass flanges. Diagonally you have 1 heat...
€536.60
Quick-view
Bottom fitting for boiler pipe 1/2"M 1/2"M, hole 1/4"F Bottom fitting for boiler pipe 1/2"M 1/2"M, hole 1/4"F

bottom fitting for boiler pipe 1/2"m 1/2"m, hole 1/4"f

This brass casted boiler fitting is used on the bottom side of the heat exchanger (HX) of the espresso machine boiler. It attaches to the HX with a ½”male flat sided connection. The other ½”pipe connection is for the return pipe from the brewing group. The ¼”female thread on the bottom is for the injector tube. In this tube the fresh water is injected....
€17.11
Quick-view
Parker pressure switch PS325-1C 25A 3 phase Parker pressure switch PS325-1C 25A 3 phase

Parker pressure switch PS325-1C 25A 3 phase

This pressure switch is the only pressure switch Parker builds for the espresso machine market, brands like Asco (Sirai) and Ma-Ter are a lot more well know for this application. But it doesn’t mean that they can’t be made by someone else. This Parker pressure switch is the model PS325-1C-SX (part numbers 870502 and 870500) is a 3 phase pressure switch...
€85.61
Quick-view
Faema President and E61 2 group glass Faema President and E61 2 group glass

Faema E61 and President 2 group glass

It is not uncommon that the back lid glass of your Faema E61 or Faema President breaks. Glass remains fragile in the end. On this page you will find a replacement glass for the 2 group espresso machine. The get rid of the sharp edge the glass has been cut with a small chamfer. This glass plate comes without a stickers. We do only have the stickers for the...
€276.34
Quick-view