Gaggia water sticker

The rotary vane espresso machine pump. There are various brands which manufacture these pumps like Fluid o tech, Nuert and Procon. The pump on this page is made by the company Procon. Part number 132A060F123B The pump on this page is called a rotary vane clamp pump. The pump is clamped on a flange with a stainless steel clamp. If you tighten this clamp...

On this product page you will find a pump pressure manometer. This manometer can be used on various Gaggia espresso machines. The Gaggia part reference of this item is DM1599. The pressure gauge goes from 0 to 15 bar. The outer diameter of the body is 39mm. The rim diameter is 44mm. On the back of this pressure gauge is a male 1/8” BSP-G thread. This...

On this page you will find a small cartridge heating element. This specific heating element can be used in Gaggia espresso machines. The matching part number for this item is DM1804/001 This specific heating element produces 80W at 240V. This element has a outer diameter of 12mm and a overall length of 55mm. You will find this heating element on Gaggia...

The item on this product page is one of the smaller sizes of o rings. This o ring can be used with various brands such as La Spaziale, La Scala, Carimali, Gaggia and La Pavoni. This o ring has been made from the gasket material FKM. The cord diameter of this o ring is 1,78mm and the internal diameter is 3,69mm. This o ring has been made in Italy. You can...

The P303T01 a more lightweight 3 phase pressure switch then the Asco P302/6 3 phase pressure switch. The difference is also that the P302/6 has a partially metal cover. And the P303T01 has a full plastic cover. This pressure switch has been used espresso machines like: Bianchi, Fiamma and Orchestrale.Nowadays these pressure switches are named Asco, in the...

On this product page you will find a contact thermostat which is used on a variety of espresso machine brands. You will find this contact thermostat on Brasilia, Gaggia and Isomac espresso machines. The part references are for Brasilia 09415.2.00.08, Gaggia WGADM1561 and for Isomac IS000281.  This contact thermostat is set at 100°C and is a...

The solenoid valve on this product page is made by the company Parker. This solenoid valve is mainly used as a water inlet valve for filling the boiler for various espresso machine brands such as San Marco, Faema, Nuova Simonelli, Conti, Gaggia, Scala and La Spaziale. This solenoid valve is a 2 way solenoid valve. The in and outlet of this solenoid valve...

The o ring on this page is used to seal off the steam tip from the steam wand at the bottom. You can find this o ring with a variety of brands like Spaziale, Astoria and Wega espresso machines. With the part numbers of Spaziale 08354, Astoria 12300013 and Wega WY12300013. This o ring has a cord diameter of 1,2mm and a internal diameter of 6mm. The o...