La San Marco 105
The level probe on this page is a OEM/Original La San Marco spare part. This level probe has the part reference of 202209, 400124, BVASS2000 and CCMMIN0020
This level probe is installed in the top of the boiler of various La San Marco espressomachines, with a slightly bend probe. The probe itself has been made from stainless steel. The...
€48.28
IMS La San Marco 3 Cup Filterbasket 19-22gr
On this product page you will find a bigger double filterbasket which can be used for all La San Marco espresso machines. The La San Marco part reference for this item is 1460109 .
This filterbasket is not just a double filterbasket. It is one of the competition series of IMS filtri. The part reference from IMS is B662TH32M.
This stainless steel...
€22.82
La San Marco steam water valve nut
The brass nut on this product page can be used on various steam and water valve used on the San Marco espresso machines. The San Marco part reference numbers for this item are 205123 and CCMMIN1020.
This brass nut has a female 3/8” BSP-G thread on the inside. The thickness is 6mm and the outer size is 26mm. This fitting has been made in Italy....
€3.45
La San Marco steam and water valve body
This item is a casted steam and water valve body. This valve body is the basis of most La San Marco espresso machine steam and water valves. The La San Marco part references for this item are 502050 and BOFUS0160.
This valve body has been made from casted brass and has been machined afterwards for the threads. This valve body has been made in Italy....
€34.23
Filterholder gasket shim 0.8mm 64x53mm
On this you will find a paper seal/shim or filler. These paper shims are a handy and cheap solution to fix your portafilter gasket problems.
When you use your portafilter the lugs and the bayonet like system of the group wear. So when you use a standard thickness of portafilter gasket it is possible that your portafilter doesn’t seal or goes too...
€0.77
La San Marco non return valve
The item on this product page is a OEM/original San Marco spare part. this is a non return valve used in various models of La San Marco. The part reference numbers of San Marco are 400029, 400029A, BVASS2280 and BVASS2290.
This non return valve is used on the water inlet tap. This item has been made from casted brass which has been machined afterwards....
€152.23
Asco (Sirai) pressure switch P302/6
Probably the most used pressure switch used on the Asco P302/6 a 3 phase pressure switch. This pressure switch has been used espresso machines like: La Marzocco, Faema, Cimbali, Astoria, Wega, Nuova Simonelli, La Spaziale, San Remo and so on.The brand Asco used to be the company Sirai, since a while this name has changed but the product remains the same....
€83.48
3 phase safety thermostat 169-18°
On this page you will find a three phase thermostat. This item is used in a variety of espresso machines. You can find this thermostat with brands like Cimbali Faema and Casadio.
This 3 phase thermostat is made by the German company E.G.O. in Germany. The switching off temperature of this thermostat is 169°C and needs to be reset manually by pushing...
€69.02
La San Marco Stainless washer 23x15x0,5mm
This washer is a OEM/Original la San Marco spare part. This item is a washer used in various steam and water valves. The San Marco part reference for this item is 205584 and CCMSTA0150.
The washer on this page is made form stainless steel. The outer diameter is 23mm. the inner diameter is 15mm and the thickness is 0,5mm. This washer has been made in...
€2.88
San Marco sprint PTFE boiler gasket 134X124X3mm
The gasket on this page is a boiler locking gasket. This gasket is used on various La San Marco espresso machines. The La San Marco part reference for this item is 109099 and CTSGUA0340.
This boiler gasket has been made from PTFE. The outer diameter is 131mm the inner diameter is 123mm and the thickness is 3mm. This gasket has been made in Italy....
€13.08
La San Marco blue bipolar switch 16A 250V
The switch on this page is a OEM/Original San Marco spare part. This switch is used on the La San Marco 105 espresso machine. The San Marco part reference for this item is 108675.
This switch is rated up to 16A at 250V. Inside the switch is a indicator light when it is powered. The mounting hole for this switch is 13x20mm. This switch has been...
€17.95
Procon clamp ring pump 180 L/H
The rotary vane espresso machine pump. There are various brands which manufacture these pumps like Fluid o tech, Nuert and Procon. The pump on this page is made by the company Procon. Part number 132A060F123B
The pump on this page is called a rotary vane clamp pump. The pump is clamped on a flange with a stainless steel clamp. If you tighten this clamp...
€179.36