La Scala Espresso Machines: Crafting Authentic Italian Espresso
On this page you will find a camme guide bushing. This part is a generic part for Faema E61 brewing groups and the brewing groups made in the E61 style. This part is made from brass with a total length of 28mm, the outer dimensions are 15 and 10 mm. The ID is 8mm and the head of the bushing has a thickness of 5mm.
This part slides over the shaft off the...
€3.16
Solenoid valve connector
The product on this page is a solenoid valve connector, large F fitting. With this connector you can seal off and connect your wiring and solenoid valve to each other.
These connectors can be used on all types of standard solenoid valve coils. Where the positive and negative are spaced apart approx. 17mm.
This solenoid valve connector can be basically...
€3.47
Vibiemme Lollo water/steam tap
On this product page you will find a chrome plated steam and water valve suitable for the Vibiemme Lollo espresso machines. The Vibiemme part reference of this item is ASSRACCRUBLOLLO
This steam and water valve has been made from brass and chrome plated afterwards. The in and outlet fittings are on both sided a 3/8”BSP-G thread. This...
€91.81
O ring gasket 18,72X2,62 EPDM
The o ring on this product page can be used on various espresso machine brands such as La San Marco, Cimbali and Brasilia. The Brasilia part reference number is 00800.0.00.02, the Cimbali part reference numbers are 400343000 and 400-343-000. For San Marco the part reference number is 109061.
This o ring is made from the material EPDM. The cord diameter...
€1.18
Gasket AFM 34 22x16x2mm
The most common location for this to seal off the 3/8” male nut on the top of the Faema E61 and E61 style brewing groups like with Bezzera, Brasilia, Grimac, La Scala, Vibiemme and Wega.But also as a gasket to seal off boiler components with brands like Vibiemme and Grimac,
This gasket has been made from the material AFM 34 made by the german company...
€1.36
Valve assembly for steam valve
The item on this product page is a valve gasket part which can be used on various espresso machine brands such as ECM Heidelberg, Grimac, Fiorenzato, Marzocco and Vibiemme. The ECM Heidelberg part reference is P6003.9, the Fiorenzato reference is A2200203, The Grimac reference is A2200203, the Marzocco reference is B.1.004/9 and finally the part...
€8.03
Crushable copper washer 22x16.5x2.2mm
The item on this product page is a crushable copper gasket. This gasket can be used with a variety of espresso machine brands and applications. You can use this gasket with brands such as Cimbali, Faema, Vibiemme and Pavoni. The part reference for this item is for Faema 4701135891, for Pavoni 362000/362007/362075, for Vibiemme GUARTACHGR.
This round...
€2.09
Lucifer solenoid valve 3 way base mounting 115V 50/60Hz
The item on this page is a 3 way solenoid valve made by the brand Lucifer. This item is slightly different, seen it’s not a standard 220/230V model. But it is a 110V model.
This 3 way valve can be used on a variety of espresso machine brands such as Casadio, Brugnetti, San Marco, La Scala, Cimbali, Grimac, Faema, Astoria, Nuova Simonelli, La...
€102.29
Faema E61 steam valve pin
This brass tap spindle is used a the Faema E61 steam and water valve and the valves which have resemblance to the e61 valve used by brands like Vibiemme, La Scala and Grimac.
When the shaft axle is turned open or closed, this tap spindle pushes against the valve seat. Which opens or closes the steam/water valve. This specific brass tap spindle has a...
€2.69
Cafelat red silicone portafilter gasket 73x57x8mm
This size of portafilter gasket is the most common portafilter gasket you will find. This size can be used on the e61 style of brewing groups. You can use them on brands such as Faema, San Remo, Vibiemme , ECM, La Pavoni, Wega, Rocket and so on. This gasket is made by the HongKong based company Cafelat.
This gasket is made from food graded red silicone....
€4.88
Hardened stainless steel guide
The item on this page is a hardened steel bushing for a steam and water valve. This bushing can be used on various espresso machine brands such as ECM Heidelberg, Fiorenzato, Marzocco and Vibiemme. The ECM Heidelberg part reference number is P6003.4 , the Fiorenzato part reference is A1300120 , the Marzocco reference is B.1.004/4 and the Vibiemme part...
€5.93
Brass half nut 3/8" 21x6mm
Brass fittings used on espresso machines are generic items, seen they are used in quite a lot of coffee machines. This specific model is a nut with a 3/8” BSP-G thread with a height of 6mm. The wrench size used for this item is a 21.
Which models use this 3/8” BSP-G nut.? Well you can find this nut with brands like: Gaggia, Saeco, Victoria Arduino,...
€2.03
E61 style spring holder
The item on this product page is a spring guide bushing used on various E61 Style of brewing groups. You can use this item with brands such as ECM Heidelberg, La Scala, Bezzera, Isomac, Pavoni and Brasilia. The Bezzera part reference is 7479942, the Brasilia part reference number is 13657.0.00.04, for ECM Heidelberg it is B7479942, for Isomac ISBUS313116...
€5.14
Copper crushable washer 23x17x3mm
On this page you will find a copper gasket, not just a copper gasket but a crushable version. This specific model has an outer diameter of 22mm an internal diameter of 17mm and a height of 3mm.
Copper crushable washers can be used in various pump and boiler related applications. You need to tighten the fitting enough to crush the copper, which makes the...
€1.47
Vibiemme heating element 1400W 110V
On this product page you will find a screw in heating element suitable for various Vibiemme, La Scala and Brasilia espresso machines. The Brasilia part reference is 01912.2.00.08, La Scala reference C-0520/120 and the Vibiemme reference ELETRESD1411
This heating element produces 1400W at 110V and has 2 connecting poles. The fitting used on this screw in...
€63.97
Boiler injector and fitting 1/4" M-M
Boiler injector and fitting 1/4" M-M with 90° L=140MM
Suitable for BFC, Grimac, La Scala Vibiemme
€17.44
Faema E61 group spout breaker
The fitting on this product page is the last fitting on various E61 style of brewing groups. The drain fitting. This item can be used on various brands which use the E61 group, such as Faema, Grimac, La Pavoni, Rocket and Wega.
This drain fitting has been made from machined brass. Which has been polished, nickel and chrome plated. The thread on one side...
€9.31
Hardened steel shaft lever tap
The item on this page is a hardened steel pin for a steam and water valve. This shaft can be used on various espresso machine brands such as ECM Heidelberg, Fiorenzato, Marzocco and Vibiemme. The ECM Heidelberg part reference number is P6003.3, the Fiorenzato part reference is A2200266, the Marzocco reference is B.1.004/3 and the Vibiemme part...
€12.20
Hardened steel insert
The item on this page is a hardened steel bush used on various steam and water valves. This item can be used on brands such as Vibiemme, Marzocco, ECM Heidelberg and Fiorenzato. The ECM Heidelberg part reference number is P6003.2, for Fiorenzato it is A2200265, for Marzocco it is B.1.004/2 and for Vibiemme it is RACCINSRUBLOL.
This steel bushing has...
€5.22
Level probe 1/4 150mm
The level probe on this page is made by the Italian company Gicar. This level probe is used in a variety of espresso machines such as San Remo, Grimac and Astoria. The Astoria reference is 20258, the Grimac reference is GR212 and the San Remo part reference is 10112042. The Gicar part reference for this item is 9.0.81.02G
The level probe shown on...
€13.01
Valve guide square 12,1mm 6x6mm m3
The item on this product page is a square brewing group/valve pin. This valve pin can be used on various brands such as Vibiemme, Faema, Pavoni and Wega. The Vibiemme part references are RACCGAVAERQU and RACCGAVAINQU, for Wega the reference is WY27421012, for Pavoni the references are 312225 and 312227. For Faema the references are...
€1.57