The flat copper gasket on this product page can be used with a variety of espresso machines and on various applications. You can use this copper gasket on espresso machines such as Marzocco, Casadio, ECM Heidelberg, La Scala, La Cimbali, Faema, Astoria, Wega, Nuova Simonelli, Wega and Rancilio. You will mainly see the use of this copper gasket to seal...
On this page you can find a o ring which is in use with a variety of brands in various configurations. You can find this o ring in water and steam taps, boiler components and in water level assemblies. This o ring is made from EPDM. The used cord diameter is 1,78mm and the internal diameter of the o ring is 10,82mm. This o ring can be used on steam and...
The most important part on a espresso machine is the safety valve. This part prevents that a boiler can explode. The safety valve will open up when the pressure inside the boiler becomes too high. This specific safety valve is made out of brass. The thread type used for this safety valve is 3/8”BSP-G. The calibrated pressure of the valve is 2.0...
The anti vacuum valve on this page is only used with the brands Rancilio and Promac, same company. The anti depression valve size is quite uncommon, the size used is mainly ¼”BSP-G instead of a 3/8” thread. The compatible Rancilio part number for this item is 10060050 This anti vacuum valve is made of stainless steel. The plunger...
The item on this page is a double male fitting. The threads used on each side are ¼” BSP-G threads. They are straight and not conical. This type of fitting is used with various brands such as San Marco, Grimac, Astoria, Wega, La Spaziale, Nuova Simonelli, Pavoni, Victoria Arduino and Gaggia. The complete reference and model list can be...
This type of fitting is a reduction. From 1/8 to ¼ and can be used on numerous espresso machine brands such as Marzocco, Grimac, La Scala, Astoria, Spaziale, Wega, Pavoni and Rancilio. The part reference numbers can be found in the extra info tab. This fitting is made from machined brass. On one side is a male 1/8” BSP-G on the other side is...
On this product page you will find a Gicar flowmeter, what does a flowmeter do? Well if you have a timed touch panel, this flowmeter measures how much water is passing true. This is measured with a small wheel inside the flowmeter. This flowmeter is made by the Italian company Gicar and also made in Italy. This models grounds to it’s own body...
The boiler safety valve shown on this page can mainly be found on La Pavoni espresso machine boilers. The La Pavoni part reference for this item is 395221G This boiler safety valve has a male 3/8” BSP-G thread. The pre-set pressure is 1,8 bar and nonadjustable. The seal used is a FKM seal, when opened the steam outlet is 872 L/M. This valve is CE...
The product on this page is a gasket, a copper one. This copper gasket is a flat gasket, so not a compression gasket. This flat copper gasket is used in a variety of espresso machines and applications. You mainly see them in the category of steam and water valve or boiler components. This gasket has a outer diameter of 22mm a inner diameter of 17 and a...
On this page you will find a injector tube for the Rancilio espresso machine. This injector tube has the Rancilio part number 21014234. This injector tube is placed at the bottom of the heat exchanger in the boiler. This part has a length of 127mm. The section which threads into the boiler has a 3/8” BSP-G thread. The threads which stick out of the...
The temperature probe on this product page can be used on various older Rancilio espresso machine models. The Rancilio part reference number for this temperature sensor is 34070174. This temperature probe is installed in the boiler of various Rancilio models. The thread used on this probe is 3/8”. The probe has been made in Italy. This probe...
On this page you will find the Rancilio water level regulator. This level regulator controls the water level inside the boiler. The level control board comes with a wiring harness. This item is a OEM/original Rancilio item and has the Rancilio part number 34070171 or 34070211 You can find this water level regulator in the Rancilio Epoca,...
Rancilio is one of the few espresso machine brands who produces their sight glasses from PTFE. Traditionally you will find a harder type of glass used for the water level sight glasses. The Rancilio part number for this item is 38228066 This model is made from PTFE and has a outer diameter of 10mm and a overall length of 107mm. You will find this sight...
Cookie | Provider | Purpose | Expiry |
---|---|---|---|
PHP_SESSID | brooks-parts.com | The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. | Session |
PrestaShop-# | brooks-parts.com | This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. | 480 hours |