The boiler system on a Rocket Appartamento is quite a standard type of boiler configuration. The Appartamento is a single boiler Heat Exchanger(HX) system, which is quite common. This HX is placed diagonally inside the boiler. the HX heats the fresh brewing water up with the heat of the boiler.
With the Rocket brand there are various types of temperature control present, one is with the control of a temperature probe(PID) and the other is based on the boiler pressure with a pressure switch. In the case of the Rocket Appartamento this is done with a pressure switch.
This pressure switch controls the heating of the heating element. When the pressure is above a x amount, it will turn off the heating element and vice versa. The heating elements on the Rocket Appartamento are available in a 115V and a 230V version, they both produce 1200W.
Other components you will find on the boiler of a Appartamento are safety thermostats, vacuum valves, level probe, safety valve and a variety of tubes and fittings.
If you are not entirely sure which boiler components you require for your Rocket Appartamento, don’t hesitate to contact us.
The crushable copper gasket on this page can be used with various applications on Brasilia espresso machines. For instance, on sealing off steam and water tubes and as a gasket on various boiler fitting applications. The Brasilia part reference for this item is 01386.0.00.02 This copper gasket has a outer diameter of 23mm a inner diameter of...
The item on this product page is a crushable copper gasket. This gasket can be used with a variety of espresso machine brands such as Casadio, ECM Heidelberg, La Scala, Cimbali, Faema, Astoria, Nuova Simonelli, Pavoni, Wega and Rancilio. This crushable copper gasket has a outer diameter of 18mm a inner diameter of 14mm and a thickness of 2mm. This gasket...
On this page you will find a PTFE heating element gasket is suitable for a variety of brands such as ECM Heidelberg and Bezzera This heating element gasket has a outer diameter of 42mm a inner diameter of 33mm and a thickness of 3mm. This size of gasket is suitable for a 1” screw in heating element.
On this product page you will find a anti vacuum valve. This valve is made completely out of brass and can be easily disassembled. This type of anti vacuum valve is used with quite a lot of espresso machine brands. This valve has a male ¼”BSP-G thread. The o ring inside the valve is made from HNBR, but the o ring end stop is made from PTFE....
The item on this page is a boiler level probe. This specific model of level probe can be found on various Rocket espresso machine models. The Rocket part reference for this item is C199900839 This level probe has been made up out various components. The probe itself is made from stainless steel and has a length of 80mm, this is sealed of with a PTFE...
The fitting on this page is a L fitting. This fitting has a male and female thread and can be used on various applications. The male thread is a 1/8” BSP-G thread and the female side is a 1/8’BSP-G thread as well. This L fitting has been casted and machined out of brass. It is possible that it comes nickel plated. This item has been made in...
The Ma-Ter XP 110 pressure switch. One of the most used pressure switch models. Mainly used in domestic espresso machines, but you will also find them in commercial espresso machines. Used on Bezzera, Astoria, Cimbali, ECM and Profitec espresso machines. The thread is a ¼” BSP-G. The pressure reach is 0,5-1.5bar. It is pre-set at 1,0 bar....
A Anti vacuum valve is used to prevent that the pressure switch is kicked in too early when heating up. This anti vacuum valve has a male screw thread of ¼” BSP. A anti vacuum valve exists out of multiple components. The body with the threads, in this case made from stainless steel. The plunger, made from brass. This plunger has also the...
The gasket on this product page is a PTFE flat gasket which can be used on various applications such as boiler gaskets, water inlet gaskets and steam and water valves. This gasket is used on brands such as San Remo, La Scala, Grimac, Nuova Simonelli, Victoria Arduino and Gaggia. This gasket has been made from PTFE. The outer diameter is 18mm the inner...
On this product page you will find a contact thermostat which is used on a variety of espresso machine brands. You can find this contact thermostat on Bezzera and Rocket espresso machines. The Bezzera part reference is 7434009 and the Rocket part reference is C199901550 This contact thermostat is set at 135°C and is a manual reset model. The contact...
The heating element on this product page can be found on various espresso machine brands such as Rocket and ECM Heidelberg. The rocket part reference is C199901551 and for ECM it is C199901551. This heating element produces 1200W at 230V and there are 2 connecting poles. The immersed depth is 130mm. the heating element flange is a screw in type and...
The item on this product page is a OEM/Original Rocket spare part. This item is a boiler safety valve and has the Rocket part reference of A299904998. This boiler safety valve has a male 3/8” BSP-G thread. The opening pressure of this valve has been set at 1,8 bar. The hose end fitting side has a diameter of 7mm. This valve has been made in Italy....
Cookie | Provider | Purpose | Expiry |
---|---|---|---|
PHP_SESSID | brooks-parts.com | The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. | Session |
PrestaShop-# | brooks-parts.com | This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. | 480 hours |