Rocket Giotto Evoluzione V2
The brass fitting on this page is a double male one and is used on various espresso machines. such as ECM Heidelberg, Profitec and Rocket.
This fitting has been made from machined brass. On each side is a male 1/8” BSP-G thread. This fitting can not be used on flared tubing. This fitting has been made in Italy.
€3.82
E61 upper pipe
The item on this product page is the upper drain sleeve. This drain sleeve can be used with a wide selection of E61 brewing groups. Such as with the brand Faema, ECM, ECM Heidelberg, Isomac, Pavoni, Rocket and San Remo.
This drain sleeve has been made from machined brass. This has been afterwards been nickel and chrome plated. The fitting on the inside is...
€30.34
AFM 34 gasket 26x21x2mm
This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....
€1.16
Faema E61 group upper plug
On the top of a Faema E61 brewing group or a E61 brewing group is always the final item. That’s a chrome plated 3/8” male plug. Nothing else nor something special.
This is generic part which can also be used in a variety of situations then a E61 brewing group, but also on different locations on a espresso machine. Like on the boiler with a Vibiemme...
€5.14
Faema E61 camme spring 15x25mm
This stainless steel compression spring with the dimensions of 15x25mm is normally used as a camme spring on a Faema E61 brewing group or on E61 style brewing groups. Like with the Faema E61, Faema E61 legend, Grimac, Isomac, Pavoni, Wega and a variety of other brands which use a e61 style of brewing group.
Besides that option, this model compression...
€1.52
O ring gasket 32,93x2,62mm FKM
The o ring on this product page can be used on a variety of espresso machine brands and in various applications. You can find this o ring on brands such as ECM Heidelberg, La Scala, Bezzera, Cimbali, Grimac, La Spaziale, Brasilia and Gaggia. With applications such as water and steam valves and on brewing groups. The part references codes can be found in...
€2.87
Anti vacuum valve 1/4"M stainless steel
The item on this product page is a stainless steel anti vacuum valve. This anti vacuum valve can be used on various Rocket espresso machines, if you want to use it on a different brand that is also possible. The Rocket part reference for this item is A219905510
This anti vacuum valve has been made completely from stainless steel, so also the plunger. The...
€10.89
Wera shower screen screwdriver slotted
In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.
But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...
€13.54
Rocket ode solenoid valve 2 way 1/8" 230/240V
On this page you will find a 2 way solenoid a ODE solenoid valve. This valve is made by ODE in Italy, the part number of this item is: 21JN1R0V23-TS
This 2 way solenoid valve has a in and outlet, they are both 1/8” BSP. The orifice in the solenoid valve has a diameter of 2,3mm and is in it’s closed position sealed of with a FKM seal. The body of the...
€33.87
E61 style group drain valve disk
The drain valve disc on this product page is only used in a few E61 style of brewing groups. You can find them with espresso machine brands such asLa Scala, Bezzera, ECM Heidelberg, La Pavoni, Rocket, Grimac and Isomac.
This brass disc can be found at the bottom of the drain of various e61 groups. The brass disc has a outer diameter of 15mm and 8mm. the...
€3.48
L fitting brass 1/8" MM
The fitting on this product page is a L fitting, this fitting can be used with a variety of espresso machine brands such as Brasilia, Cimbali, ECM Heidelberg, Faema and Rocket.
This L shaped fitting has been made from casted brass which has been machined. After machining the brass has been nickel plated. The threads on both sides are a 1/8”BSP-G....
€3.17
L Fitting brass 1/8" MF
The fitting on this page is a L fitting. This fitting has a male and female thread and can be used on various applications.
The male thread is a 1/8” BSP-G thread and the female side is a 1/8’BSP-G thread as well. This L fitting has been casted and machined out of brass. It is possible that it comes nickel plated. This item has been made in...
€3.23
Faema E61 sleeve
On this page you will find a camme guide bushing. This part is a generic part for Faema E61 brewing groups and the brewing groups made in the E61 style. This part is made from brass with a total length of 28mm, the outer dimensions are 15 and 10 mm. The ID is 8mm and the head of the bushing has a thickness of 5mm.
This part slides over the shaft off the...
€3.16
Asco pressure switch P203/T01 20A
The P203T01 is also manufactured by the company Asco, in the past the name of these pressure switches was Sirai. This name change happened for all the products of Sirai. This Asco Pressure switch is a 2 pole instead of a 3 pole pressure switch. With a full plastic cover.
This pressure switch has been used espresso machines like: La Pavoni, Rocket and La...
€90.16
Gasket AFM 34 22x16x2mm
The most common location for this to seal off the 3/8” male nut on the top of the Faema E61 and E61 style brewing groups like with Bezzera, Brasilia, Grimac, La Scala, Vibiemme and Wega.But also as a gasket to seal off boiler components with brands like Vibiemme and Grimac,
This gasket has been made from the material AFM 34 made by the german company...
€1.36
Water stem complete
The item on this page is a complete water stem. This item can be used on variety of espresso machines such as San Remo, Vibiemme, La Scala, Grimac, Pavoni, Rocket and Gaggia.
This water stem has a 1/8” BSP-G female thread. The water stem does have the filter membrane inside, this can be replaced. The item has been made in Italy.
This water stem can be...
€7.57
Expansion valve 1/8"F 10-14bar adjustable
On this product page you will find a espresso machine expansion valve. This model of expansion valve can be used on various domestic espresso machine manufacturers such as Pavoni and Rocket. For Rocket the part reference is C229900911, the Pavoni part reference is 453212
This expansion valve has been made from brass. The fitting used is a male 1/8”...
€24.51
Rocket single portafilter
the single portafilter on this product page can be used on various Rocket espresso machines. The Rocket part reference for this item is A699905020
This single portafilter has a ear orientation of 90 degree. The thickness of the ears of this portafilter is 5,7mm. The portafilter does come with a stainless steel spring and a single filterbasket. This...
€45.52
Rocket brew valve 57,5mm
This brewing group valve is a compatible Rocket spare part. This brewing valve is used in the top of the E61 style of brewing groups. The Rocket part reference number for this item is C219900424.
This brewing group valve has on the bottom a round pin and the overall length is 57,5mm. This valve part is made in Italy. Note: there are various lengths...
€12.32
Fluid o tech rotary pump 50 L/H 3/8" compact
The item on this page is a espresso machine pump made by the Italian company Fluid o tech. This brass espresso machine pump can be used on various espresso machine brands such as Bezzera Nuova Simonelli, Rocket and La Spaziale. The Bezzera part reference for this item is 7730509, the Spaziale part reference is 02390, the Nuova Simonelli reference 01300004...
€146.78
E61 style spring holder
The item on this product page is a spring guide bushing used on various E61 Style of brewing groups. You can use this item with brands such as ECM Heidelberg, La Scala, Bezzera, Isomac, Pavoni and Brasilia. The Bezzera part reference is 7479942, the Brasilia part reference number is 13657.0.00.04, for ECM Heidelberg it is B7479942, for Isomac ISBUS313116...
€5.14
Rocket portafilter gasket 73x57x8mm original
This portafilter gasket is used on a variety of Rocket espresso machines. This specific item is a OEM/original Rocket spare part. The part reference number for this item is C449900229
This portafilter gasket has a outer diameter of 73mm a inner diameter of 57mm and a thickness of 8mm. This gasket has been made in Italy.
This portafilter gasket can be used...
€5.76
O ring silicone 1,78x12,42mm
The item on this product page is a o ring. This o ring can be used in various espresso machine brands such as Gaggia, Lelit, Rocket and Saeco. The rocket part reference for this item is C400002786, for Gaggia the reference is NM01.021 and for Saeco the references are 140322262 and NM01.021.
This o ring has been made from red silicone. The cord diameter...
€2.96
Rocket double portafilter
The portafilter on this product page can be used on a variety of Rocket espresso machines. The Rocket part reference for this item is A699905021.
This portafilter is a 2 coffee model. The ear orientation of this portafilter is 90 degree. The thickness of these ears is 5,7mm. The spout used is a 2 coffee one, which is closed but with a removable cover....
€45.52