Vibiemme Chimaera steam and water valve

The PTFE gasket on this product page is used with various brands in various steam and water valves. You can find this gasket with brands such as Vibiemme, La Scala, Fiorenzato and Brasilia. The Brasilia part reference is 01405.0.00.02, the Fiorenzato reference is A1200044 and for Vibiemme the reference is GUARTEF. This gasket has been made from...

The item on this product page is a PTFE gasket. This gasket is in use in various applications such as brewing groups, steam and water valves and water inlet valves. You can use this gasket with brands such as Carimali, Vibiemme, Scala, Grimac, Astoria, Pavoni, Wega and Victoria Arduino This gasket has been made from the material PTFE. The outer diameter...

On this page you will find a brass steam pipe bushing. But what is a pipe bushing. A pipe bushing makes it possible to move the steam and water wand freely without leaking. So how does it work? Well the pipe bushing has on the valve side 2 o rings, these seal against the side of the inside of the valve. But on the top ring of the pipe bushing there is...

On this page you will find the o ring with the cord diameter of 1,9mm and a internal diameter of 7,2mm. This specific o ring is used with a variety of applications in expresso machines. For instance, with Expobar in the water inlet valve. For Faema in the cappuccinatore. With Vibiemme, La Scala, Fiamma, Grimac, Brasilia, ECM Heidelberg and La Carimali in...

On this page you will find a o ring with the dimensions 10,78x2.62mm. It is made from FKM (viton is a registered trade brand, but the material is identical) This o ring is used in a variety of locations in espresso machines. It is used with steam and water wands in espresso machines with brands like: Marzocco, Casadio, Vibiemme, Grimac, Cimbali and Faema....

The steam and water valve knob on this page is mainly famous as the knobs used on the classic Faema E61 espresso machines. But nowadays they are used in a variety of other brands as well. Like with Vibiemme, La Scala and Grimac. This type of knob can also be used on the modern Faema E61 legend and Jubilee espresso machines. For the part references check...

Faema E61 stainless steel valve rod Return to the Faema E61 steam/water valve overview

The compression spring on this page knows a variety of applications with various brands. You can use this spring with brands like Vibiemme, La Scala, Faema, Spaziale and Brasilia. As for instance on steam and water valves. The part references can be found in the extra info tab This stainless-steel compression spring has a outer diameter of 15mm and a...

On this page you will find a Vibiemme steam tube which can only be used for a left handed machine side. This Vibiemme (TUBILANCVASXI) Steam tube is a original item and is used on the following espresso machine models: Vibiemme Chimaera, Vibiemme Cubo and the Vibiemme Replica. As earlier mentioned this is Left Hand side steam tube. The article is made out...

Every valve needs to have return spring to close again. On this page you will find the return spring used in the Faema E61 steam and water valve. As well in their successors used in Vibiemme, Grimac and la Scala machines. This spring is made out of stainless steel and has an external diameter of 12,5mm and a length of 30mm. So, steam and water valves...

This brass tap spindle is used a the Faema E61 steam and water valve and the valves which have resemblance to the e61 valve used by brands like Vibiemme, La Scala and Grimac. When the shaft axle is turned open or closed, this tap spindle pushes against the valve seat. Which opens or closes the steam/water valve. This specific brass tap spindle has a...

This stainless-steel washer is used in a variety of espresso machine applications. This ranges from the washers to bolt on the heating element on a La Pavoni Europiccola/Professional. To a spacer in the steam valve on a Faema E61, this also includes all version which resemble the e61 valve model like with the Vibiemme, Grimac and La Scala espresso...