Bicone soldering fitting 10mm tubing

A welding end cap nut is used to put pressure on the welding cap so it seals against the conical surface of it. Once there is not enough pressure from the back from the welding cap nut, the seal won’t work. There are a variety of sizes welding cap nuts, some interchangeable with various welding caps. The brass welding cap nut in this page has a ¼” BSP-G...

This soldering fitting is a bicone model, which is different then the regular ones. This specific model is used in combination with 8mm copper tubing and with the dedicated 3/8” BSP nut.

A welding end cap nut is used to put pressure on the welding cap so it seals against the conical surface of it. Once there is not enough pressure from the back from the welding cap nut, the seal won’t work. This type of welding end cap is slightly different then the standard types of caps. To start, this welding end cap is a male thread instead...

On this product page you will find a brass welding cap. These welding caps are soldered to the ends of copper tubes in combination with a welding nut. This round surface seals off when the nut it tightened. The brass material compresses and this seals off the valve. At some point this seal will leak. This small size you see that it is used in combination...

For espresso machines you have a wide selection of soldering/welding caps. This is also the case for the brands of Gruppo Cimbali. They have a specific welding end cap soldered on their tubing, You can find this welding end cap on brands such as Casadio, Cimbali and Faema. This specific soldering cap is used in combination with 8mm copper tubing. Besides...

On this product page you will find a brass welding cap. These welding caps are soldered to the ends of copper tubes in combination with a welding nut. This round surface seals off when the nut it tightened. The brass material compresses and this seals off the valve. This size of welding end cap is mainly used for making tubing for pressure switches. So...

This soldering fitting is a bicone model, which is different then the regular ones. This specific model is used in combination with 6mm copper tubing and with the dedicated ¼” BSP nut.

This soldering fitting is a bicone model, which is different then the regular ones. This specific model is used in combination with 12mm copper tubing and with the dedicated 1/2” BSP nut.