Filter by
Categories
Price
€ €
Shop by Manufacturer
Filter

Home

Anti vacuum valve 1/4" Anti vacuum valve 1/4"

Anti vacuum valve 1/4"

A Anti vacuum valve is used to prevent that the pressure switch is kicked in too early when heating up. This anti vacuum valve has a male screw thread of ¼” BSP. A anti vacuum valve exists out of multiple components. The body with the threads, in this case made from stainless steel. The plunger, made from brass. This plunger has also the gasket on it,...
€9.77
Quick-view
Ducati Energia capacitor 10μF 450V Ducati Energia capacitor 10μF 450V

Ducati Energia capacitor 10μF 450V

The capacitor on this page is a 10µF model. This model is manufactured by the Italian company Ducati Energia. The part reference for this item is 41610.1564. This capacitor is used as a start capacitor for pump motors and as a start motor for the coffee grinder motor. This capacitor can be found with brands such as Casadio, Carimali, Vibiemme, Cimbali,...
€6.96
Quick-view
La Cimbali filterbasket 1 coffee 6gr La Cimbali filterbasket 1 coffee 6gr

La Cimbali filterbasket 1 coffee 6gr

The filterbasket on this page is for 1 coffee dose. This item is used on La Cimbali espresso machines. The La Cimbali part reference for this item is 457232000 and 457-232-000. This filterbasket has been made by the Italian company IMS Filtri, the part reference is GC1T043. This filterbasket holds about 6 grams of ground coffee. The outer diameter is 68mm...
€5.48
Quick-view
Brass nut 3/8" hole dia 12,5mm h 17mm Brass nut 3/8" hole dia 12,5mm h 17mm

Brass nut 3/8" hole dia 12,5mm h 17mm

The nut on this product page is a welding end cap nut. This nut is used to install the tube with the welding end cap to a other fitting.  This brass nut is used in combination with a solder fitting. The thread on the inside is a female 3/8” BSP-G thread. The height of the nut is 16mm and the central hole for this nut is 12,5mm. This brass...
€4.31
Quick-view
Faema Filterbasket 18gr Faema Filterbasket 18gr

Filterbasket 18/21gr 70x28mm

The 2 coffee filterbasket on this page can be used a big variety of espresso machine brands. You can use this basket on brands such as Faema, Grimac, Astoria, Wega, Rancilio and Conti. This filterbasket has been made by the Italian company IMS Filtri. The IMS part reference is IMS3T011. Note: this is not a competition filterbasket. This stainless steel...
€6.39
Quick-view
Rubber protecting sleeve for 10mm steamtubes Rubber protecting sleeve for 10mm steamtubes

Rubber protecting sleeve for 10mm steamtubes

The item on this page is a steam and water tube burn protecting sleeve. This specific model of sleeve can be used on various brands of the La Cimbali group such as Faema, Casadio and Cimbali. The part references for these brands are all 927132010 . This rubber grip is suitable for steam and water tubes which have a diameter of 10mm. this specific item has...
€8.67
Quick-view
Filterholder gasket 73x57x8mm Filterholder gasket 73x57x8mm

Filterholder gasket 73x57x8mm

On this page you will find a portafilter gasket suitable for a variety of brands such as Faema, San Remo, Cimbali, Vibiemme, La Scala, Bezzera, Pavoni and Isomac. This portafilter gasket has been made from NBR. The outer diameter is 73mm the inner diameter is 57mm and the thickness of this gasket is 8mm. This gasket has been made in Italy. You can use...
€5.53
Quick-view
Crushable copper washer 1/4" 18x14x2mm Crushable copper washer 1/4" 18x14x2mm

Crushable copper washer 1/4" 18x14x2mm

The item on this product page is a crushable copper gasket. This gasket can be used with a variety of espresso machine brands such as Casadio, ECM Heidelberg, La Scala, Cimbali, Faema, Astoria, Nuova Simonelli, Pavoni, Wega and Rancilio. This crushable copper gasket has a outer diameter of 18mm a inner diameter of 14mm and a thickness of 2mm. This gasket...
€1.19
Quick-view
Bilt Nical 125 water filter Bilt Nical 125 water filter

Bilt Nical 125 water filter

A water filter of this type is a type of water filter that is fitted within the water tank of an espresso machine or coffee maker. The majority of home coffee makers are outfitted with this specific kind of water filtration system. The actual filter is manufactured by the Italian company known as Bilt. The Nical 125 is an Italian-made model with this...
€3.50
Quick-view
O ring gasket epdm 11,91x2,62mm O ring gasket epdm 11,91x2,62mm

O ring gasket epdm 11,91x2,62mm

The o ring on this page has a cord diameter of 2,62mm and a internal diameter of 11,91mm and is made from EPDM. This specific model of o rings is mainly used in steam and water valves but can also be used in various brewing groups and boilers. This o ring is used in various steam and water valves of the brands La Carimali, San Remo, Nuova Simonelli, La...
€2.26
Quick-view
Bezzera heating element 1350W 110V Bezzera heating element 1350W 110V

Bezzera heating element 1350W 110V

The heating element on this page is a element used in various Bezzera espresso machines with a single group. The Bezzera part reference for this item is 5721127TP . This heating element produces 1350W at 110V and has 2 connecting poles. The immersed length of the heating element is 160mm. This heating element is a screw in type of heating element and has...
€55.63
Quick-view
valve rod washer 21x16x1mm valve rod washer 21x16x1mm

valve rod washer 21x16x1mm

The washer on this page is solely used on espresso machines manufactured by the La Cimbali Group. So you will find this OEM/Original washer on brands such as Casadio and Cimbali espresso machines.  The matching part numbers for this washer are for Casadio 590715000 and for La Cimbali 590-715-000  This washer makes sure that you can’t turn out the steam...
€1.38
Quick-view
Brass welding cap 4mm Brass welding cap 4mm

Brass welding cap 4mm

On this product page you will find a brass welding cap. These welding caps are soldered to the ends of copper tubes in combination with a welding nut. This round surface seals off when the nut it tightened. The brass material compresses and this seals off the valve. At some point this seal will leak. This type of brass welding cap is the smallest welding...
€1.95
Quick-view
Faema E61 steam tube Faema E61 steam tube

Faema E61 steam tube

On this product page you will find a complete steam tube which is suitable for the Faema E61 espresso machine. As well for the Faema President and Faema Lambro. This steam wand has a overall length of 250mm. To connect the steam wand to the valve there is a male 3/8” BSP-G thread. The steam tip has a internal 1/8”BSP-G thread and has 4 steam nozzles. The...
€31.81
Quick-view
La Cimbali sight glass gasket La Cimbali sight glass gasket

La Spaziale sight glass gasket

The sight glass gasket on this page is a OEM/Original La Spaziale spare part. This item has the La Spaziale part reference of 00265. This sight glass gasket has been made from red silicone. The outer diameters are 17 and 14mm. The internal diameter is 11mm. The height of the gasket is 9 and 4mm. This gasket has been made in Italy. You can find this red...
€4.32
Quick-view
O ring 15.08x2.62mm O ring 15.08x2.62mm

O ring 15.08x2.62mm EPDM

On this product page you will find a EPDM o ring. This o ring is used in a variety of espresso machines and applications. With brands like Astoria, San Marco, Wega, La Pavoni and Brasilia. The o ring is made from EPDM. The thickness of the cord is 2,62mm and the internal diameter of the o ring is 15,08mm This part is used mainly in brewing groups with...
€1.19
Quick-view
La Cimbali HX 150mm La Cimbali HX 150mm

La Cimbali heat exchanger 150mm

On this page you will find a heat exchanger cartridge. This tube is available in 2 versions a 210mm version and a 150mm version. The one on this page is a 150mm version. The length of this copper heat exchanger(HX) is 150mm and has a outer diameter of 42mm. It is possible that you get a blank copper one or a copper with nickel plating. This cartridge can...
€32.78
Quick-view
portafilter gasket 74x57.5x8mm

portafilter gasket 74x57.5x8mm

The portafilter gasket shown on this page is used with various espresso machines of the Cimbali group and with Vibiemme espresso machines. the part reference numbers can be found in the extra info tab. This portafilter gasket has been made from NBR. The outer diameter is 74mm the inner diameter is 57,5mm and the thickness is 8mm. This gasket has 4...
€3.57
Quick-view
E61 brewing group gasket rebuild kit E61 brewing group gasket rebuild kit

Faema E61 brewing group gasket rebuild kit

The gasket only rebuild kit on this product page comes with the consumables used on the Faema E61 brewing group. So this complete set can not be used on other E61 style of brewing groups, a lot of the items are compatible but not all of them. In most cases you don’t have to replace the brass items in your brewing group, seen they will wear out less...
€28.80
Quick-view
Valve rod washer 18x6.4x1.6mm Valve rod washer 18x6.4x1.6mm

Valve rod washer 18x6.4x1.6mm

The item on this product page is a M6 washer, this washer can be used on various steam and water valves. Such as the brands Marzocco, Royal, Carimali and San Remo. The Carimali part reference is 93.00058, the Marzocco reference is L165/9 and for San Remo it is 10402040. This flat washer is made from zinc plated steel, this is not a issue seen its not in...
€0.66
Quick-view
Astoria Wega steam water shaft gasket Astoria Wega steam water shaft gasket

Astoria Wega steam water shaft gasket

The valve shaft gasket on this page is used with basically every steam and water valve manufactured for Astoria and Wega espresso machines. This gasket makes sure that there doesn’t leak any steam or water past the shaft of the valve. The Astoria part reference is 12204 and the Wega part reference is WY12204  This gasket has been made out...
€1.55
Quick-view
Astoria sight glass 11x170mm Astoria sight glass 11x170mm

Astoria sight glass 11x170mm

On this page you will find a sight glass for various Astoria and Wega espresso machines. The Astoria part number for this sight glass is 21300 and the Wega part number is WY21300. The sight glass has a outer diameter of 11mm and a overall length of 170mm. This sight glass doesn’t have any reference lines. This sight glass of 11x170mm can be used on the...
€5.22
Quick-view
Faema E61 steam valve knob Faema E61 steam valve knob

Faema E61 steam valve knob

The steam and water valve knob on this page is mainly famous as the knobs used on the classic Faema E61 espresso machines. But nowadays they are used in a variety of other brands as well. Like with Vibiemme, La Scala and Grimac. This type of knob can also be used on the modern Faema E61 legend and Jubilee espresso machines. For the part references check...
€18.50
Quick-view