La Pavoni has used different brewing groups, hydraulic systems and electrical configurations across its espresso-machine range. A component may fit several models, while another apparently similar component may only be suitable for one particular version.
Before ordering, check:
When no part number is visible, compare the old component with the product photographs and technical measurements. Do not select electrical, hydraulic or pressure-related parts solely because they appear visually similar.
The La Pavoni Bar range includes manual, volumetric and lever-operated commercial machines in several group configurations. Use the dedicated La Pavoni Bar parts category for components associated with the brewing group, boiler, water system, valves and controls.
The Bar T series was also produced in lever-operated, manually controlled and volumetric versions. These versions can use different brewing-group and control components. View the available La Pavoni Bar T parts and verify the exact machine configuration before ordering.
The La Pavoni Diamante range includes spring-lever, manually operated and volumetric machines. Because these versions do not use the same brewing system, the model suffix is important when selecting parts. See the dedicated category for La Pavoni Diamante parts.
The compact La Pavoni Pub series was produced with different brewing groups, dosing systems and water-supply configurations. Parts for manual, volumetric and tank-fed versions must therefore be checked carefully. Browse the available La Pavoni Pub parts.
The La Pavoni Vasari range includes manual, volumetric and spring-lever versions with different brewing-group operation. Select your components through the La Pavoni Vasari parts category and confirm the exact version of the machine.
Parts around the brewing group are subject to heat, pressure and mechanical wear. Common service components include portafilter gaskets, shower screens, valve seals, springs, diffusers and group-locking gaskets.
For additional components, view our categories for:
Commercial La Pavoni portafilters are not automatically suitable for domestic lever machines such as the Europiccola or Professional. Check the ear orientation, ear thickness, basket diameter and listed model compatibility before ordering.
The hydraulic circuit can contain a rotary or vibration pump, solenoid valves, expansion valves, non-return valves, flowmeters, level probes and a range of fittings and pipes. The components used depend on the machine model and configuration.
A pump that does not start, a brewing group that does not discharge correctly or a boiler that does not fill automatically does not always indicate a defective pump. The cause may also be a blocked pipe, valve, electrical connection, level controller or water-supply problem.
Browse our general categories for espresso-machine pumps and solenoid valves. Always check voltage, flow direction, connection type and original part number.
La Pavoni commercial machines have been produced with different boiler sizes, heating-element powers and electrical configurations. The number of groups alone is not sufficient to identify the correct heating element.
Check the machine voltage, element wattage, flange dimensions, immersed length, number of terminals and original part number. If the machine does not heat, also inspect the pressure switch, thermostat, safety device, wiring and electrical contactors before assuming that the heating element has failed.
See our category of espresso-machine heating elements for available elements and related gaskets.
Steam and hot-water valves contain components such as valve shafts, seals, O-rings, springs, bushings, knobs and complete valve bodies. Leakage from a closed valve can be caused by a worn seal or valve seat, while difficult operation may be related to the shaft, spring, lubrication or internal scaling.
Older and newer machines do not necessarily use the same valve components. Compare the original part number, shaft length, thread and seal dimensions. Additional components can be found under steam-valve parts.
This category contains both original La Pavoni components and compatible replacement parts. An original component is supplied according to the manufacturer’s specification. A compatible component is intended as an alternative to one or more stated original part numbers.
Compatible does not mean universally suitable for every La Pavoni machine. The listed part number, model compatibility, dimensions, voltage and technical configuration remain decisive.
Domestic lever machines such as the La Pavoni Europiccola, Professional and Stradivari use different brewing-group and portafilter components from La Pavoni commercial espresso machines. Pre-millennium and millennium domestic groups can also require different gaskets, pistons and portafilter sizes.
Only use a component for a domestic lever machine when the product page explicitly lists that model or the matching original part number. Do not direct Europiccola or Professional owners to the commercial Bar or Pub categories.
Some La Pavoni-branded products and components relate to coffee grinders rather than espresso machines. Grinder burrs, capacitors, bearings, dosing parts and switches should be selected according to the exact grinder model. You can also browse the general category for coffee-grinder parts.
Record the complete model name, serial number and any number printed on the old component. Clear photographs of the part, its connections and its mounting position can help distinguish between similar versions.
For additional components, browse our complete range of espresso-machine parts.
