The items on this page a boiler components used on various La San Marco coffee machines. There is a variety of components needed on espresso machine boilers.
In the case of La San Marco, these always have a flanged boiler on 1 side. This side is also the side where the heating element is installed. A flanged boiler does also need to be fitted with a boiler flange gasket. Note there are various boiler gasket sizes available.
Other components you can use on San Marco espresso machine boiler are safety valves, Anti vacuum valves, level probes and various types of gasket to seal off these components.
On this page you will find a three phase thermostat. This item is used in a variety of espresso machines. You can find this thermostat with brands like Cimbali Faema and Casadio. This 3 phase thermostat is made by the German company E.G.O. in Germany. The switching off temperature of this thermostat is 169°C and needs to be reset manually by pushing...
The level probe on this page is a OEM/Original La San Marco spare part. This level probe has the part reference of CCMMIN0030 and 202237. This level probe is installed in the boiler flange of various La San Marco espressomachines. Seen the location it isn’t straight, but slightly bent. The probe itself has been made from stainless steel. The...
This pressure switch is the only pressure switch Parker builds for the espresso machine market, brands like Asco (Sirai) and Ma-Ter are a lot more well know for this application. But it doesn’t mean that they can’t be made by someone else. This Parker pressure switch is the model PS325-1C-SX (part numbers 870502 and 870500) is a 3 phase...
The most important part on a espresso machine is the safety valve. This part prevents that a boiler can explode. The safety valve will open up when the pressure inside the boiler becomes too high. This specific safety valve is made out of brass. The thread type used for this safety valve is 3/8”BSP-G. The calibrated pressure of the valve is 2.0...
On this page you will find a boiler safety valve 3/8” male with a present of 1,8 bar. This safety valve is, at own responsibility, adjustable. This can be done by tightening or untightening the Allan key slot in the top of the valve. Inside this safety valve has a stainless steel spring inside, the sealing material is FKM. This is a non certified...
This type of anti vacuum valve is one of the most common valves around. This valve is suitable for a variety of espresso machine brands like Casadio, La Carimali, San Marco, San Remo, La Cimbali, Grimac, La Spaziale and so on. This anti vacuum valve has a male ¼”BSP-G thread. The body of this anti depression valve has been made out of...
The anti-vacuum valve on this page can be used on various espresso machine models of the brand San Remo. The anti vacuum valve has the San Remo part reference of 10652040A This anti vacuum valve has been made from stainless steel. The thread used is a male ¼” BSP-G thread. This stainless steel anti vacuum valve has been made in Italy...
A Anti vacuum valve is used to prevent that the pressure switch is kicked in too early when heating up. This anti vacuum valve has a male screw thread of ¼” BSP. A anti vacuum valve exists out of multiple components. The body with the threads, in this case made from stainless steel. The plunger, made from brass. This plunger has also the...
The boiler safety valve shown on this page can mainly be found on La Pavoni espresso machine boilers. The La Pavoni part reference for this item is 395221G This boiler safety valve has a male 3/8” BSP-G thread. The pre-set pressure is 1,8 bar and nonadjustable. The seal used is a FKM seal, when opened the steam outlet is 872 L/M. This valve is CE...
The boiler gasket shown on this product page is suitable for a variety of La San Marco espresso machines. The part reference for this item is 109073. The outer diameter is 165mm. the inner diameter is 150mm and the thickness is 3mm. This gasket has been made from PTFE. Made in Italy. This gasket can be used on the La San Marco 100, La San Marco 105, La...
The gasket on this page is a boiler locking gasket. This gasket is used on various La San Marco espresso machines. The La San Marco part reference for this item is 109099 and CTSGUA0340. This boiler gasket has been made from PTFE. The outer diameter is 131mm the inner diameter is 123mm and the thickness is 3mm. This gasket has been made in Italy....
The level probe on this page is a OEM/Original La San Marco spare part. This level probe has the part reference of 202209, 400124, BVASS2000 and CCMMIN0020 This level probe is installed in the top of the boiler of various La San Marco espressomachines, with a slightly bend probe. The probe itself has been made from stainless steel. The...
The boiler safety valve on this page can be found on various models of La Carimali. The La Carimali part reference number for this item is 97.00148 . This safety valve has a male 3/8” thread. This valve has been calibrated on 1,9 bar. The seal inside the valve is made from FKM, when this opens there will flow out 87 kg/h of steam. The operating...
The boiler safety valve shown on this page can be used on wide selection of espresso brands such as Brasilia, Wega, Astoria, Grimac, Cimbali, Faema, Marzocco and Carimali. The part references can be found on the extra info tab. This boiler safety valve has a male 3/8” BSP-G thread. The safety valve has been set at 1,8 bar, this is not adjustable....
The boiler safety valve shown on this product page is used on various older La San Marco espresso machines. The part reference of La San Marco for this item is 205426. This safety valve has a male metric thread of M18 with a pitch of 1,5mm. The boiler safety valve has been calibrated on a pressure of 1,8 bar. It is capable to release 6,3 KG/H of steam....
The boiler safety valve is used on a variety of espresso machine brands such as San Marco, La Scala, Nuova Simonelli, Victoria Arduino and Gaggia. The Gaggia part reference for this item is WGADM1380/003, the Nuova Simonelli part references are 98013001, 98013000 and 98013022. For San Marco the references are 205426 and CSCSIC0020. The Victoria...
Cookie | Provider | Purpose | Expiry |
---|---|---|---|
PHP_SESSID | brooks-parts.com | The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. | Session |
PrestaShop-# | brooks-parts.com | This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. | 480 hours |