La San Marco - Inlet valve
La San Marco - Inlet valve
There are 12 products.The water inlet valve La San Marco uses is basically one type of water inlet valve. The main water inlet valve is connected to external pump of the La San Marco espresso machine. The water inlet valve is only used for filling up the boiler, the water for the brewing group goes true a earlier valve(expansion valve).
With this water inlet valve you can manually fill the boiler inside the San Marco espresso machine. The biggest variation is mainly the knob/handle used for filling the machine. you see that San Marco models such as the earlier San Marco 85 and the San Marco 95 use a curved handle. Where later versions of these models and the San Marco 105 use a straight water inlet valve handle
O ring gasket 7,66x1,78mm epdm
(0) The o ring on this page is used on various espresso machine brands such as Casadio, Carimali, San Marco, Cimbali, Faema, Grimac, Saeco and Gaggia. This o ring has various applications, such as in steam and water valves and in water inlet valves. The part references can be found in the extra info tab. This o ring is made from EPDM. The cord diameter is...
La San Marco steam/water stainless steel...
(0) The stainless-steel shaft on this page has various applications with La San Marco espresso machine. From the water inlet valve to the water and steam valves. The part reference of La San Marco for this item is 205094 This tap spindle has been made from stainless steel. The overall length of this item is 69mm and has a outer diameter of 7mm. This item has...
La San Marco steam/water valve spring
(0) This small compression spring is suitable for various applications on la San Marco espresso machines. The La San Marco part reference of this item is 200051. This spring is used in water inlet valves, brewing groups and steam and water valves. This stainless-steel compression spring has a outer diameter of 12mm and a overall length of 15mm. This spring...
San Marco Gasket PTFE 12x8x4mm
(0) The gasket on this page is made from PTFE and is suitable for some steam and water valves on San Marco espresso machine models. Models such as the La San Marco 85 and La San Marco 95. The San Marco part reference for this item is 109050 Note this conical shaped PTFE gasket is only suitable for the older models of steam and water valve which have...
Rubber flat gasket 13x4mm
(0) This blind gasket is used with Rancilio espresso machines to seal off the steam valves. The Rancilio part number for this item is 36301105. The blind gasket on this page has a outer diameter of 13 mm and a thickness off of 4mm. The models which use this specific spare part are the Rancilio Classe 10, Rancilio Classe 9, Rancilio Classe 8, Rancilio...
La San Marco spring 15x20mm
(0) This stainless steel compression spring is used in the inlet valve on various La San Marco espresso machines. The part reference of San Marco for this item is 200034 This compression spring is used as a valve return spring on various models. This spring has a diameter of 15mm and a length of 20mm. This spring has been made in Italy. You can use...
O ring 15.08x2.62mm EPDM
(0) On this product page you will find a EPDM o ring. This o ring is used in a variety of espresso machines and applications. With brands like Astoria, San Marco, Wega, La Pavoni and Brasilia. The o ring is made from EPDM. The thickness of the cord is 2,62mm and the internal diameter of the o ring is 15,08mm This part is used mainly in brewing groups with...
Copper gasket 22x17x1.5mm
(0) The product on this page is a gasket, a copper one. This copper gasket is a flat gasket, so not a compression gasket. This flat copper gasket is used in a variety of espresso machines and applications. You mainly see them in the category of steam and water valve or boiler components. This gasket has a outer diameter of 22mm a inner diameter of 17 and a...
La San Marco steam/water valve inlet...
(0) This flat EPDM gasket is used on only 1 brand of espresso machine. The brand La San Marco. This gasket is used in the water inlet tab and the steam and water valves. The La San Marco part reference for this gasket is 109024 and CTSGUA0110. This flat EPDM gasket has a outer diameter of 15mm and a central hole which has a diameter of 5,5mm. The...
La San Marco steam/water valve gasket holder
(0) This item is a OEM/Original La San Marco spare part. This item is a brass gasket holder/spring guide. In one side there can be installed a gasket of 15x5,5x4mm. On the other side you can install the valve spring. This gasket holder is used in various steam and water valves, as well in the water inlet valves. The part references for this La San Marco item...
Non return valve 3/8M - out 3/8M
(0) The item on this page is a non return valve. This non return valve is a general spare part and can be used on various applications. This valve is made from brass hex square stock of 21mm. on each side is a male 3/8” BSP-G thread. The total length of this non return valve is 61mm. The item has been made in Italy.
La San Marco brass lever stuffing ring
(0) 4,16 €The item on this product page is a OEM/Original La San Marco spare part. This unit is used as a stuffing ring on the cup warming shaft. The La San Marco part reference number for this item is 205114. You can use this stuffing ring on the La San Marco Leva, La San Marco 85, La Scan Marco 95 and the La San Marco 105.
