La San Marco - solenoid valve
La San Marco - solenoid valve
There are 14 products.The solenoid valve is used on every modern espresso machine. This is also the case with La San Marco espresso machines. The solenoid valve has various applications, such as at the water inlet valve and as a brewing group solenoid valve.
There are 2 types of solenoid valve. This is the 3 way solenoid valve and the 2 way solenoid valve. The 2 way solenoid valve is used for instance on the water inlet, water dispensing or the water mixing of the Tea water. The 3 way solenoid valve is used on a brewing group. When it is activated the water can flow true the group and once it is deactivated it can exhaust the remaining water.
The brands you can use on La San Marco coffee machine are ODE, Parker, Lucifer and Olab. With selecting a solenoid valve make sure that all the parameters are the same such as the Voltage, Orifice, wattage and fitting type.
O ring gasket 6.07x1.78mm Solenoid valve
(0) This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal...
Solenoid valve connector
(0) The product on this page is a solenoid valve connector, large F fitting. With this connector you can seal off and connect your wiring and solenoid valve to each other. These connectors can be used on all types of standard solenoid valve coils. Where the positive and negative are spaced apart approx. 17mm. This solenoid valve connector can be basically...
Parker 2 way solenoid valve 1/4" 1/4" DN...
(0) The solenoid valve on this product page is made by the company Parker. This solenoid valve is mainly used as a water inlet valve for filling the boiler for various espresso machine brands such as San Marco, Faema, Nuova Simonelli, Conti, Gaggia, Scala and La Spaziale. This solenoid valve is a 2 way solenoid valve. The in and outlet of this solenoid valve...
Parker 3 way solenoid valve 24V 50/60Hz
(0) On this page you will find a 3 way solenoid valve made by the company Parker. This specific model is a 24V AC 3 way valve. Which can be used on some Faema and San Marco brewing groups. The parker part number for this item is 393110J This solenoid valve is a flanged 3 way valve. The flange is sealed off with the 2 o rings at the bottom of the valve....
Parker 3 way solenoid 110V 50/60Hz conical
(0) On this page you will find one of the most used brewing group solenoid valves in espresso machines. But this is instead of a 230V version a 115V version. This solenoid valve has been manufactured by the company Parker. The Parker parts reference for this solenoid valve is 393106J or 393111J This 3-way solenoid valve is a model with a flat flange, this...
Parker 2 way solenoid valve 1/8" 1/8" 230V
(0) On this page you will find a 2 way solenoid valve manufactured by the company Parker, this specific valve has been produced in Italy. This solenoid valve is mainly used as a water inlet valve and a steam and water valve solenoid. The Parker part numbers for this item are 397442 and 397443. This solenoid valve is a version which has a female threaded in...
Lucifer solenoid 3 way base mounting...
(0) The solenoid valve on this page is a 3 way solenoid valve, mainly with the application as a brewing group solenoid valve. Parker has listed this part under 471012 and 471013 The coil used on this solenoid valve is a 9W 220/240V which runs on 50/60Hz. The coil number for this solenoid valve is 483510S6 The valve in question is a 3 way solenoid...
Parker 3 way solenoid valve 220/230V
(0) This 3 way solenoid valve is one of the most commonly found solenoid valves. The part is produced by Parker in Italy. This valve is mainly used as a brewing group solenoid valve. The remaining water from the group comes out of the outlet at the top. The Parker part numbers for this item are 393107J and 393112J This solenoid valve is a 3 way valve. The...
Lucifer solenoid valve 3 way base mounting...
(0) The item on this page is a 3 way solenoid valve made by the brand Lucifer. This item is slightly different, seen it’s not a standard 220/230V model. But it is a 110V model. This 3 way valve can be used on a variety of espresso machine brands such as Casadio, Brugnetti, San Marco, La Scala, Cimbali, Grimac, Faema, Astoria, Nuova Simonelli, La...
Ode solenoid valve 3 ways base mounting...
(0) Most of the pump driven espresso machines use a 3 way solenoid valve the control the brewing process. On this page you will find a ODE solenoid valve made by the Italian company ODE. The solenoid valve number is: 31A1AR15-VORV This specific model is a flanged model. So it is bolted against a flat machined surface with 4 allen bolts. These surfaces are...
Parker 2 way solenoid valve 1/4" 1/4" 110V...
(0) The solenoid valve on this page is a water inlet valve made by the company Parker, this valve has been manufactured in Italy. The parker part number is 397484 This solenoid valve has a inlet and outlet which have a ¼” BSP-G thread in the inside. The orifice in the middle of this valve has a diameter of 3mm and is sealed off with a FKM...
ODE 2 way solenoid valve 1/8" 230V 5W
(0) The solenoid valve on this page has been manufactured by the Italian company ODE. The valve on this page is a 2 way solenoid valve with the ODE part number 21JN1R0V23. The solenoid valve is a 2 way valve. The in and outlet of this valve has a 1/8” BSP thread. The orifice in the solenoid valve has a diameter of 2,3mm and is sealed of with a FKM...
CEME 2 way solenoid valve 1/8" F 120V
(0) The solenoid valve on this page is made by the Italian company Ceme. This specific solenoid valve is used on various espresso machine brands such as ECM Heidelberg, Nuova Simonelli, San Marco and Vicotria Arduino. The ECM Heidelberg part reference is US1005, for Nuova SImonelli 04100043, for San Marco 108677A, CCEELE0020 and for Victoria Arduino the...
Ode 3 way solenoid valve 230V PPS
(0) This model of solenoid valve is quite a common design and used with a variety of espresso machine manufacturers. This specific solenoid valve is made by the Italian company ODE. But the difference is that this item is made from a Technopolymer PPS. The part number for this item is 21APBK1R15-RPT0 The specific item is a 3 way solenoid valve with a base...
