The steam and water valves used on La San Marco espresso machines are quite unique in their own way. There are various versions available of the water and steam valves.
The most common one is the driving bowl valve. With this valve when the handle is in the middle position the valve is closed, when moving the handle up or down the valve will open. The handle used for this valve is similar to the design of the portafilter handles used on these machines. This valve can be found on the San Marco 85, San Marco 95 and the San Marco 100. The newest La San Marco espresso machines such as the San Marco 20/20 Classic and the San Marco 20/20 P&P use a similar design, only with a different handle.
There is also a open and close valve you need to turn clockwise or counter clockwise, this model of steam and water valve can be found on the La San Marco 105 espresso machine.
Most of the 2 valves use similar components inside the valve, but if you are not sure which components you need for your La San Marco. Don´t hesitate and contact us.
The complete steam and water valve shown on this page can be used on various La San Marco espresso machine parts. There is of this assembly no part reference number available. This complete steam and water valve does not come with a handle. This assembled steam and water valve can be used on the La San Marco 100, La San Marco 105, La San Marco 95 and the...
The steam tube on this page is suitable for the La San Marco 95 espresso machine. The La San Marco part reference for this item is 206224 . The steam tube has been made from a stainless steel tube of 10mm. This tube does come with a rubber protected sleeve, this prevents from burning your fingers. The developed length of this tube is 210mm The...
This item is a casted steam and water valve body. This valve body is the basis of most La San Marco espresso machine steam and water valves. The La San Marco part references for this item are 502050 and BOFUS0160. This valve body has been made from casted brass and has been machined afterwards for the threads. This valve body has been made in Italy....
The o ring on this page is used to seal off the steam tip from the steam wand at the bottom. You can find this o ring with a variety of brands like Spaziale, Astoria and Wega espresso machines. With the part numbers of Spaziale 08354, Astoria 12300013 and Wega WY12300013. This o ring has a cord diameter of 1,2mm and a internal diameter of 6mm. The o...
The item on this product page is a coupling which can be used on the back the steam and water valves of La San Marco espresso machines. The part reference numbers for this item are CCMMIN2740 and 205310. This rear end fitting has been made from brass. the inlet side is a male ¼”. The fitting has been made in Italy. You can use this...
The stainless-steel shaft on this page has various applications with La San Marco espresso machine. From the water inlet valve to the water and steam valves. The part reference of La San Marco for this item is 205094 This tap spindle has been made from stainless steel. The overall length of this item is 69mm and has a outer diameter of 7mm. This item has...
On this product page you will find a conical PTFE gasket suitable for a variety of La San Marco espresso machines. The La San Marco part reference for this item is 109049 The conical PTFE gasket has a outer diameter of 12,5mm a inner diameter of 7mm and a thickness of 5,5mm. This gasket seals off the Steam and water valve shaft off. This gasket has...
The item on this page is a brass low nut. This nut can be used on various La San Marco steam and water valves. This item has the La San Marco part references 205007 and CCMMIN0820. You can use this tap fitting on the La San Marco 85, La San Marco 95, La San Marco 100 and the La San Marco 105.
The compression spring on this product page can be used with various La San Marco espresso machines. This spring is used in steam and water valve and in various older brewing groups. The San Marco part references for this item are 200026 and CCMMOL0020. This compression spring has been made from stainless steel. The outer diameter is 16mm and the length...
The item on this page is a OEM/original La San Marco spare part. This item is part of the steam and water valve. This driving bole is between the closing valve and handle mechanism. The La San Marco part references for this item are 205585 and CCMSTA0180. This driving bowl/stainless steel shield is used is basically every steam and water valve used...
The item on this product page is a brass washer which is used with various La San Marco espresso machines. This washer can be used in various water and steam valves, as well as the water inlet valves. The part references for this brass washer can be found in the extra info tab. You can use this washer on the La San Marco 100, La San Marco 105, La San...
This PTFE gasket has a bit more unusual shape. It is a tube shape. This PTFE gasket is used on a variety of La San Marco espresso machine models. The La San Marco part reference of this item is 109125 and CTSGUA0410. This PTFE seal has a outer diameter of 16mm and a height of 20mm. This seals off the space between the steam tube and the steam and...
This small compression spring is suitable for various applications on la San Marco espresso machines. The La San Marco part reference of this item is 200051. This spring is used in water inlet valves, brewing groups and steam and water valves. This stainless-steel compression spring has a outer diameter of 12mm and a overall length of 15mm. This spring...
The gasket on this page is made from PTFE and is suitable for some steam and water valves on San Marco espresso machine models. Models such as the La San Marco 85 and La San Marco 95. The San Marco part reference for this item is 109050 Note this conical shaped PTFE gasket is only suitable for the older models of steam and water valve which have...
This steam and water valve compression spring is used in a variety of La San Marco espresso machine models. The La San Marco part reference for this item is 200033 This compression spring is made from stainless steel and has a outer diameter of 16mm. the overall length of this spring is 20mm. The item has been made in Italy. You can use this...
The steam tube grip on this page is suitable for steam tubes of 10mm in diameter. If you click this steam tube around your stainless steel or chrome plated steam tube you will never have the issue of burning your hands on the tube. This rubber grip has part references to Brasilia espresso machines 11972.0.00.02 and San Remo espresso machines with...
The lever spindle on this page is used on various La San Marco espresso machines. The La San Marco part references are 400004I, 502004 and BVASS0800. This handle transfers the vertical motion of the lever to a horizontal motion, for opening and closing the steam and water valve. This item has been made in Italy You can use this lever spindle...
The gasket on this page is a PTFE steam and water valve gasket suitable for a variety of La San Marco espresso machines. The La San Marco part reference for this item is CTSGUA0300 and 109091. The outer diameter of this PTFE gasket is 14,8mm the inner diameter is 10,5mm and the thickness is 4,5mm. This gasket is sloped. The item has been made in...
Cookie | Provider | Purpose | Expiry |
---|---|---|---|
PHP_SESSID | brooks-parts.com | The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. | Session |
PrestaShop-# | brooks-parts.com | This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. | 480 hours |