Filter by
Manufacturers
Type part
more... less
Type
Price
€ €
Filter

Rocket Giotto Evoluzione V2

The Rocket Giotto is one of the models the company Rocket Milano produces. This model is the Rocket Giotto Evoluzione V2 version. This is a domestic espresso machine, with a lot of features which you normally find on commercial espresso machines.

This espresso machine is a single boiler model, which is based on a heat exchanger(HX) principle. This boiler is fed from the water tank on the back of the espresso machine, so there is no water connection required. The water is pumped from this reservoir into the HX boiler, this is not done with a vibration pump but with a full motor/pump assembly as you would find on a commercial espresso machine. This motor can be a 115V or a 230V version.

The Giotto Evoluzione V2 is fitted with a E61 style of brewing group. This type of brewing group is one of the most used types, but the model used on the Rocket is not a generic one. So not all parts are interchangeable with other espresso machine brands.

Faema E61 valve gasket 15,5x7,5x4mm Faema E61 valve gasket 15,5x7,5x4mm

Faema E61 valve gasket 15,5x7,5x4mm

This gasket is again such a standard type of gasket in the world of espresso coffee machines. It is the EPDM gasket 15.5x7.5x4mm. This gasket is used a variety of applications on espresso machines. Offcourse on the Faema E61 brewing group as well for the E61 style brewing group, as the camme shaft gasket. By brands like Isomac, Bezzera, ECM, Brasilia,...
€0.74
Quick-view
Portafilter gasket 73X57X8.5mm Portafilter gasket 73X57X8.5mm

Portafilter gasket 73X57X8.5mm

This portafilter gasket has a outer diameter of 73mm a inner diameter of 57mm and a thickness of 8,5mm. 73x57x8,5mm. This type of brewing group gasket is one of the most standard portafilters around. You will find this on the Faema E61 groups as well as on the E61 style groups used by Vibiemme, La Scala, Bezzera, San Remo, Fiorenzato and Grimac. Of this...
€4.19
Quick-view
E61 shower screen old style 60mm E61 shower screen old style 60mm

E61 shower screen old style 60mm

This article is one of the earliest designs of the 60mm shower screen. This shower screen is made by IMS CFDR070.  The border diameter is 60mm, it has a internal height of 15,7mm. The internal holes, 112 in total, have a diameter of 2mm Note: this is not a specialty coffee shower, but IMS also produces normal showers. This is, unlike other 60mm models, a...
€4.29
Quick-view
Portafilter gasket 73x57x8mm Portafilter gasket 73x57x8mm

Portafilter gasket 73x57x8mm

The portafilter gasket on this page can be used on various espresso machine models such as ECM Heidelberg, La Pavoni, Rocket and Wega. The part references for this item are for La Pavoni 361014, for ECM Heidelberg C449900229 , for Rocket C449900229 and for Wega W10321/ WY12227  This portafilter gasket has been made from NBR with shore 75. This portafilter...
€3.95
Quick-view
Solenoid valve silicone o...

Solenoid valve silicone o ring 6,07x1,78mm

This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal diameter...
€0.66
Quick-view
PTFE gasket 26x21x2mm

PTFE gasket 26x21x2mm

This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....
€1.38
Quick-view
PTFE gasket 35x30x2mm PTFE gasket 35x30x2mm

PTFE gasket 35x30x2mm

The gasket on this page is a Polytetrafluoroethylene (PTFE) gasket with the dimensions 35x30x2mm. This specific gasket is used on 3 specific places on the E61 style brewing group (the Faema E61 and Faema E61 legend group use a different size of ptfe gasket). It is used to seal off the top trumpet or drain sleeve, on the side of the group the camme holder...
€1.47
Quick-view
Heating element gasket PTFE 42x33x3mm Heating element gasket PTFE 42x33x3mm

Heating element gasket PTFE 42x33x3mm

On this page you will find a PTFE heating element gasket is suitable for a variety of brands such as ECM Heidelberg and Bezzera This heating element gasket has a outer diameter of 42mm a inner diameter of 33mm and a thickness of 3mm. This size of gasket is suitable for a 1” screw in heating element.
€3.40
Quick-view
Stainless steel filter 8.6x22.5mm Stainless steel filter 8.6x22.5mm

Stainless steel filter 8.6x22.5mm

The item on this product page is a stainless steel water filter, this filter is used with various espresso machine brands in the top of the brewing group. You can find this filter with brands such as ECM Heidelberg, San Remo, Vibiemme, La Scala, Bezzera, Grimac, Astoria, La Pavoni and wega. This stainless steel water filter has a outer diameter of 8,5mm...
€3.47
Quick-view
Ulka vibration pumps suction fitting Ulka vibration pumps suction fitting

Ulka vibration pumps suction fitting

The item on this product page is one which can be used on various Ulka espresso machines vibration pumps. This pump inlet can be used with brands such as Grimac, Elektra, Fiorenzato, Rancilio, Saeco and Gaggia. The Ulka part reference number for this item is 8.01.033 This 90 degree fitting has been made from a plastic called santoprene. The internal pump...
€2.76
Quick-view
E61 style group spout breaker E61 style group spout breaker

E61 style group spout breaker

On this page you will find a brewing group spray nozzle. This nozzle is one of the most used spay nozzles used in the world of espresso machines. The nozzle has a outer diameter of 30mm and the male thread, which threads into the brewing group, is M10x1mm. What is the purpose of having a nozzle. Well the spray nozzle is located above the shower screen....
€6.37
Quick-view
Drain valve assembly Drain valve assembly

Drain valve assembly

The drain valve is responsible for draining the last water out of the E61 style brewing group. This espresso machine part is made up out of 4 parts. The gasket holder, the gasket, small brass washer and a triangular valve rod. The total length of this part is 27mm. This drain valve used in a variety of espresso machine brands like: Expobar CTAV1-05,...
€8.99
Quick-view
PTFE gasket 21x16.8x2mm PTFE gasket 21x16.8x2mm

PTFE gasket 21x16.8x2mm

The PTFE gasket on this page can be used on a variety of espresso machines brands and various applications. You will mainly find this gasket as a seal with water and steam valves, but you can also find them in brewing groups. This PTFE gasket has a outer diameter of 21mm a inner diameter of 16,8mm and a thickness of 2mm. You can use this flat gasket in...
€0.99
Quick-view
Brewing group gigleur 0.6mm Brewing group gigleur 0.6mm

Brewing group gigleur 0.6mm

This nozzle/gigleur is installed primarily in the brewing group on a espresso machine. It has a hole diameter 0,6mm. There are a variety of diameters available. The thread used on the part is a male M6 with a pitch of 0,75mm. The thread pitch can vary between 0,75mm and 1mm keep that in mind. But also the diameter of the nozzle can vary, so expect when...
€1.58
Quick-view
Gasket PTFE 22x16x2mm Gasket PTFE 22x16x2mm

Gasket PTFE 22x16x2mm

This a universal Polytetrafluoroethylene (PTFE) gasket with 22x16x2mm. The gasket is used on a variety of espresso machine components. This type of gasket found boilers, brewing group and valve assemblies. The most common location for this to seal off the 3/8” male nut on the top of the Faema E61 and E61 style brewing groups like with Bezzera, Brasilia,...
€0.86
Quick-view
Contact thermostat 135°C with M4 thread Contact thermostat 135°C with M4 thread

Contact thermostat 135°C with M4 thread

On this product page you will find a contact thermostat which is used on a variety of espresso machine brands. You can find this contact thermostat on Bezzera and Rocket espresso machines. The Bezzera part reference is 7434009 and the Rocket part reference is C199901550 This contact thermostat is set at 135°C and is a manual reset model. The contact...
€10.71
Quick-view
O ring gasket epdm 11,91x2,62mm O ring gasket epdm 11,91x2,62mm

O ring gasket epdm 11,91x2,62mm

The o ring on this page has a cord diameter of 2,62mm and a internal diameter of 11,91mm and is made from EPDM. This specific model of o rings is mainly used in steam and water valves but can also be used in various brewing groups and boilers. This o ring is used in various steam and water valves of the brands La Carimali, San Remo, Nuova Simonelli, La...
€2.26
Quick-view
Faema E61 group infusion spring 14x45mm Faema E61 group infusion spring 14x45mm

Faema E61 group infusion spring

On this page you will find a stainless steel compression spring with a outer dimension of 14mm and a length at rest of 45mm. This compression spring is being used in a variety of espresso machine brewing groups. This ranges from the famous Faema E61 brewing group, the E61 style brewing group. But also a variety of other type of brewing groups used by...
€1.62
Quick-view
E61 style camme rod Vibiemme brass lever rod

E61 style camme rod

This camme rod for E61 style espresso machines is slightly different then the one used in the Faema E61. This one has a small guide pin at the end which goes inside the group. On the other side there is a squared off section for the lever arm. This section is 6x6mm. To hold the lever in place there is a M6 thread on the end for some sort of a nut. This...
€20.25
Quick-view
PTFE gasket 18x13x2mm PTFE gasket 18x13x2mm

PTFE gasket 18x13x2mm

The gasket on this product page is a PTFE flat gasket which can be used on various applications such as boiler gaskets, water inlet gaskets and steam and water valves. This gasket is used on brands such as San Remo, La Scala, Grimac, Nuova Simonelli, Victoria Arduino and Gaggia. This gasket has been made from PTFE. The outer diameter is 18mm the inner...
€1.15
Quick-view
Drain valve pre-assembled 52,8mm Drain valve pre-assembled 52,8mm

Drain valve pre-assembled 52,8mm

The drain valve on this page is used in a variety of E61 style of brewing groups. You will find this model of drain valve assembly on brands such as Bezzera, ECM Heidelberg, Isomac, La Pavoni, Brasilia, Grimac and Royal. This drain valve comes pre-assembled. The assembly contains the triangular shaped shaft, gasket holder, gasket, flat washer and the...
€15.01
Quick-view
Heating element 1200W 230V Heating element 1200W 230V

Heating element 1200W 230V

The heating element on this product page can be found on various espresso machine brands such as Rocket and ECM Heidelberg. The rocket part reference is C199901551 and for ECM it is C199901551. This heating element produces 1200W at 230V and there are 2 connecting poles. The immersed depth is 130mm. the heating element flange is a screw in type and has a...
€62.08
Quick-view
Level probe 1/4 80mm Level probe 1/4 80mm

Level probe 1/4 80mm

The item on this page is a boiler level probe. This specific model of level probe can be found on various Rocket espresso machine models. The Rocket part reference for this item is C199900839 This level probe has been made up out various components. The probe itself is made from stainless steel and has a length of 80mm, this is sealed of with a PTFE...
€10.17
Quick-view
Compression spring 13x42mm Compression spring 13x42mm

Compression spring 13x42mm

This stainless steel compression spring is used in the Faema E61 and E61 style brewing groups. But what does this specific do? Well this is the last compression spring in the brewing group. It is the compression spring in the brewing valve which closes the exhaust valve all the way at the bottom of the E61 brewing group. Besides the E61 group spring it is...
€2.02
Quick-view