San Remo Verona
The item on this product page is a stainless steel water filter, this filter is used with various espresso machine brands in the top of the brewing group. You can find this filter with brands such as ECM Heidelberg, San Remo, Vibiemme, La Scala, Bezzera, Grimac, Astoria, La Pavoni and wega.
This stainless steel water filter has a outer diameter of 8,5mm...
€2.77
Wera shower screen screwdriver slotted
In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.
But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...
€11.50
SanRemo heating element 2700W 230V original
The heating element on this product page is a OEM/Original SanRemo spare part. This specific unit has the SanRemo part reference number 10455186B.
This specific heating element produces 2700W at 230V and has 6 connecting poles. The heating element has in total a immersion depth of 330mm. In the middle of the flange, which has a diameter of 1”1/4, is a...
€167.46
Safety valve 3/8" 2.0 bar CE PED IV certified
The most important part on a espresso machine is the safety valve. This part prevents that a boiler can explode. The safety valve will open up when the pressure inside the boiler becomes too high.
This specific safety valve is made out of brass. The thread type used for this safety valve is 3/8”BSP-G. The calibrated pressure of the valve is 2.0...
€12.87
San Remo Verona RS dosing device
The dosing device on this product page is a OEM/Original San Remo spare part. The San Remo part reference number is 10112382E and the Gicar part reference number is 9.5.32.89G00
This dosing device can only be used on the San Remo Verona RS. This unit is called the Dosatura 3d5 ORCHESTRA PLUS FULL RANGE “VERONA RS”. The unit uses as main...
€695.19
SanRemo Verona pressure gauge protector original
The item on this page is used on a variety of the SanRemo Verona espresso machines. It is intended to protect the pressure gauge. This specific item is a OEM/original SanRemo spare part with the part reference number 10091186A.
€12.34
Steam and water valve conical connection
The steam and water valve on this product page can be used on San Remo espresso machines. The part reference for this item is 10402120B.
This steam and water valve has a flat connection so it is suitable for a conical fitting. There is also a flared model available of this version. This valve has been made in Italy.
You can find this steam and water...
€45.36
Steam and water valve spring bushing
The steam valve bushing on this page is used in one of the most common steam and water valves used. This item can be used with brands such as Marzocco, La Carimali, San Remo, La Scala, Faema, La Pavoni and BFC.
Against this brass bushing seats a valve shaft spring. This bushing pushes against 2 o rings which seal off the steam valve shaft.
This bushing...
€1.00
SanRemo Verona RS electronic board display original
The item on this page is the electronic display board used on the SanRemo Verona RS espresso machines. The item is a OEM/original spare part and has the part reference number 101123080B.
This display is made by Gicar in Italy and has the Gicar product code 8.8.74.09G. This unit has a length of 105mm and a width of 24mm.
€131.41
Fitting brass 1/4" x 1/4" MM
The item on this page is a double male fitting. The threads used on each side are ¼” BSP-G threads. They are straight and not conical.
This type of fitting is used with various brands such as San Marco, Grimac, Astoria, Wega, La Spaziale, Nuova Simonelli, Pavoni, Victoria Arduino and Gaggia.
The complete reference and model list can be...
€3.05
O ring gasket EPDM 10.77x2.62mm
The o ring on this page can be used in various applications in espresso machines. This ranges from water and steam valves, water inlet taps and water levels.
The part on this page is a O ring made from the material EPDM. This o ring has a cord diameter of 2,7mm and a inner diameter of 12,1mm. This o ring is produced in Italy.
You will find this o ring...
€1.23
SanRemo bottomless portafilter
The item on this page is a bottomless portafilter and can be used on a variety of the brewing groups used on SanRemo espresso machines. You need to think of the E61 style and the ring brewing groups.
This bottomless portafilter has a ear orientation of 90 degree and a ear thickness of 6,4mm. The portafilter comes with a double filterbasket. This product...
€36.29