Filter by
Price
Type part
more... less
Type
Filter

Wega coffee machine parts

One of the lesser known manufacturer of coffee machines is the Italian brand Wega. But that doesn´t mean that their espresso machines are of a lesser quality. But at some point every espresso machine requires maintenance and spare parts.

Wega espresso, coffee and grinder parts

Astoria Wega tap joint spring 11,4x16mm

The compression spring on this page is mainly used with the steam and water valves on the Astoria and Wega espresso machines. But it has also multiple purposes in the steam valve. This item is a OEM/Original item. The Astoria part number is 10452 and the Wega part number is WY10465. This compression spring is used to put pressure on the shaft gasket...
€1.61

O ring gasket 6.07x1.78mm Solenoid valve

This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal...
€0.48

Brewing group plug

On this page you will find a brass brewing group plug. The outer diameter of this plug is 18mm. This plug is used to seal off the nozzle/gigleur compartment. You will find this part on a variety of brewing groups. Brands like Bezzera (5288001) Brasilia (0210600004 ) la Pavoni (313600) and wega espresso machines. If you are not entirely sure if this...
€15.97

Filterbasket 2 coffee 12gr 70x21mm

The 2 coffee filterbasket on this page can be used a big variety of espresso machine brands. You can use this basket on brands such as Casadio, Brugnetti, ECM Heidelberg, San Remo, Faema, Vibiemme, La Scala, Grimnac. This filterbasket has been made by the Italian company IMS Filtri. The IMS part reference is CF2T068. Note: this is not a competition...
€4.54

L Fitting brass 3/8"M x 1/4"M

The fitting on this product page is one from the L type, seen it has a 90 degree bend. L fitting can be found on the water inlets on Astoria CMA espresso machines. Such as Astoria and Wega. This L fitting has been made from casted brass and machined afterwards. The brass has been provided with nickel. One side has a male ¼” BSP-G and the...
€5.43

Astoria Wega portafilter gasket 72x56x8mm

The portafilter gasket on this page is a alternative to the original portafilter gaskets made by the Astoria CMA group. The design of this portafilter gasket is similar to the original and is also made in Italy. The corresponding Astoria part number is 12217  and the one of Wega is WY12217  The outer diameter of this portafilter gasket is 72mm,...
€2.92

Astoria heating element 1000/1090W 230V

This small heating element is a heating element used in a double boiler system with the brands Astoria and Wega. SO this item is suitable for a single group espresso machine boiler. The part references for Astoria are 17201002  and for Wega WY17201002. This heating element produces 1000/1090W at 230/240V, the element has 2 connection poles. The...
€55.69

Wega steam sticker

The sticker on this page is a sticker used on various Wega espresso machine models. This item is a OEM/Original Wega spare part. The Wega part reference on this item is WY29037. This sticker is steam valve doming sticker, this sticker shows the open and close position and that it is used for the steam valve. This sticker is made in Italy. This sticker...
€4.31

Spring 14x45mm

The compression spring on this product page is used on various water inlet systems of Astoria CMA espresso machines. You will find this spring with the brands Astoria and Wega. The part references for Astoria are 10451 and for Wega W10545/WY10451. This stainless steel spring has a outer diameter of 14mm and a overall length of 45mm. You can use...
€2.07

L Fitting brass 3/8" MM

On this product page you will find a 3/8” L fitting. This is a generic item which can be used on a variety of espresso machines and own build projects. This L fitting a both Male 3/8”BSP-G fitting. The displayed item has a nickel finish, it is possible that you get a only brass version
€6.20

Astoria wega brass washer 15.4mm

The brass washer on this product page is a OEM/Original Astoria CMA spare part. This brass washer is used in the water inlet valve. The Astoria part reference is 25653 and the Wega part reference is WY25653. This washer has been made from brass. The outer diameter is 15,4mm the inner diameter is 9mm and the thickness is 1mm. This item has been made...
€0.89

Astoria Wega steam valve gasket holder

This steam and water tab gasket holder can be used in almost every steam and water valve used by the espresso machine manufacturer Astoria CMA. This item can be found in Astoria espresso machines with part reference 25616 and with Wega espresso machines under the reference WY25616. This gasket holder has on one side room for the flat gasket with the...
€7.51

History of Wega

In 1985 the Wega Macchine per Caffé division was founded and became part of the Astoria CMA group. It doesn’t have such a rich history as the Astoria CMA company itself.

Wega is part of the of the Astoria CMA group and is one of the biggest manufacturers of espresso machines in the world. The Astoria CMA group exists out of Astoria CMA and Wega. They have quite a lot of similarities. They both have the same market and produce mainly commercial espresso machines and grinders for the ho-re-ca.

 

Types of Wega coffee machines

The espresso machines Wega builds can be divided into 2 categories. That a coffee machine manufacturer makes all these 2 types of coffee machines is not really that common. Most of them only produce 1 type of espresso machine nowadays.

Lever espresso machine

The lever operated coffee machines are operated with the help of a spring which is installed inside of the brewing group. This spring generates the pressure on the water to force it true the coffee puck. Wega still produces a model, that is the Wega Vela Vintage. Which is a basic espresso machine with a simple and clean design.

Semi automatic coffee machine

The semi automatic coffee machines are the most common type of espresso machine. This type of coffee machine uses a removable portafilter, which is standard with Wega espresso machines. The pressure is build up with a pump and motor combination. This type of espresso machine is the standard in the world of commercial espresso machines.  

 

Wega models

The Italian manufacturer Wega has a variety of coffee machine models, they do have some similarities with the models of Astoria. But that does make sense, seen they are part of the same company, which is Astoria CMA.

Wega Polaris

The Wega Polaris is the most well know Wega espresso machine. This espresso machine is made in 1 up to 3 brewing groups, so you can use this model in a small bar but also in a busy bar.

The espresso machine works based on a heat exchanger (HX) system to feed the brewing groups with hot water. The brewing groups used on this espresso machine are a E61 style of brewing group, but the solenoid operated models.

Wega Sphera

The Wega Sphera espresso machine is one of the older Wega espresso machine models. This espresso machine has been made in variety of model versions. The basis of all the different models is that they all have a HX boiler installed. The biggest differences are in the brewing groups used on the Wega Sphera. The basis is the E61 style of brewing group, but there are versions with a manual brewing group and versions with a solenoid operated group head.

For this reason the espresso machines are also electronically different, seen the manual E61 brewing groups don’t require a dosing device only a level regulator. Where you require a dosing device for the solenoid operated brewing groups.

Wega IO

The Wega IO is one of the later Wega espresso machine models. This is a semi automatic coffee machine, with a lot of traditional features. This is a HX boiler system, which can be a 2 or a 3 group boiler. The brewing groups used on the Wega IO are solenoid operated group heads. That is required seen this is volumetric espresso machine, otherwise you can’t use the automatic dosing features on this espresso machine.  

A unique thing on Wega espresso machines, as well on Astoria machines, is the water cooled pump motor. This is a small RPM motor which has a copper coil around it to cool the motor. This prevents overheating of this compact motor.

Wega My concept

This espresso machine, the Wega My Concept, is a multi boiler espresso machine. This means that you have a central boiler for hot water and steam and for each individual brewing group a separate coffee boiler for brewing. The advantage of these temperature controlled boilers is that that they have a very accurate and stable temperature, which results in a more consistent espresso.

This espresso machine is only available in a volumetric version, which is made in a 2 and a 3 group version. So this coffee machine is ideal for most bars and restaurants.

Wega spare parts from Brooks

At Brooks we sell a variety of spare parts for Wega espresso machines, this can be OEM/original spare parts or aftermarket ones. If you are not entirely sure which spare parts you need for your Wega coffee machine, don’t hesitate to contact us.