On the Faema E61 Valve parts page you can find a variety of commercial espresso machine valve parts. This goes from the Faema E61 over pressure valve, which make sure that the pump pressure doesn’t exceed the fixed set pressure of the Over pressure valve. But also the aluminium drain pan for the excess water what can come out of the OPV or from the drain tray of the machine.
The next valve you can find on this page is the non return valve, this drain makes sure that the HX doesn’t drain itself, or the boiler when under pressure. Seen the small non return valve is pressed against the non return valve body. Which makes it impossible for the water to flow back out of the machine.
And the Final valve is the rigenerazione valve. Most of these parts aren’t available anymore. Only the knob and the o rings are still available
If you are unable to find parts for your Faema e61 please send us a message and we maybe can help you.
On this page you will find the o ring with the cord diameter of 1,9mm and a internal diameter of 7,2mm. This specific o ring is used with a variety of applications in expresso machines. For instance, with Expobar in the water inlet valve. For Faema in the cappuccinatore. With Vibiemme, La Scala, Fiamma, Grimac, Brasilia, ECM Heidelberg and La Carimali in...
The non return valve is a key components in a espresso machine. This prevents that water doesn’t flow to places it isn’t intended to do so. This specific spring is used on a variety of espresso machines like Brasilia, Faema, Grimac, La Spaziale, Vibiemme and La Carimali. The spring has a external diameter of 8mm and a overall length of 30mm....
The expansion valve gasket shown on this page is a generic item. You can find it in the catalogue of a variety of espresso machine manufacturers. The gasket is a flat NBR gasket with a pin at the end. The widest section of the gasket has a diameter of 15mm and the pin has a diameter of 6mm. The total height for the gasket is 10mm. Which espresso machine...
This O ring in nbr with the specifications 8,9x1,9mm. Makes sure that the brass non return valve seals against the body of the non return valve. Return to the Faema E61 valve parts overview
O ring EPDM 23x3mm. This o ring seals off one side of the one way valve. Return to the Faema E61 valve parts overview
The item on this page is a gasket holder for various espresso machine brands, such as Vibiemme and Faema. The part reference for this item is for Faema 4151018538 and for Vibiemme RACCPOGVAESE, This brass gasket holder has a outer diameter of 17mm/8,6mm and a internal diameter of 6mm. the height is approx. 9 and 6mm. this item has been made in...
Faema aluminium drain tray. Return to the Faema E61 valve parts overview
The product on this page is a gasket, a copper one. This copper gasket is a flat gasket, so not a compression gasket. This flat copper gasket is used in a variety of espresso machines and applications. You mainly see them in the category of steam and water valve or boiler components. This gasket has a outer diameter of 22mm a inner diameter of 17 and a...
On this page you will find a part assembly suitable for the Faema E61 vintage espresso machine. This item is not suitable for the Faema E61 Legend and Faema E61 Jubile. This item is the one way valve/non return valve. The inlet side of this valve is a 3/8”BSP-G. Originally where these items 2 individual casted items. Unfortuenately they...
Cookie | Provider | Purpose | Expiry |
---|---|---|---|
PHP_SESSID | brooks-parts.com | The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. | Session |
PrestaShop-# | brooks-parts.com | This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. | 480 hours |