Filter by
La Pavoni
more... less
Type part
more... less
Type
Filter

La Pavoni espresso machine parts

The La Pavoni espresso machine manufacturer is one of the most iconic brands in the world of espresso machines. On this page you can find a overview of espresso machine models and of spare parts commonly used on La Pavoni espresso machines.

La Pavoni espresso, coffee and grinder parts

Anti vacuum valve 1/4"

A Anti vacuum valve is used to prevent that the pressure switch is kicked in too early when heating up. This anti vacuum valve has a male screw thread of ¼” BSP. A anti vacuum valve exists out of multiple components. The body with the threads, in this case made from stainless steel. The plunger, made from brass. This plunger has also the gasket on it,...
€9.77
Quick-view

O ring gasket epdm 11,91x2,62mm

The o ring on this page has a cord diameter of 2,62mm and a internal diameter of 11,91mm and is made from EPDM. This specific model of o rings is mainly used in steam and water valves but can also be used in various brewing groups and boilers. This o ring is used in various steam and water valves of the brands La Carimali, San Remo, Nuova Simonelli, La...
€2.26
Quick-view

Filterholder gasket 73x57x8mm

On this page you will find a portafilter gasket suitable for a variety of brands such as Faema, San Remo, Cimbali, Vibiemme, La Scala, Bezzera, Pavoni and Isomac. This portafilter gasket has been made from NBR. The outer diameter is 73mm the inner diameter is 57mm and the thickness of this gasket is 8mm. This gasket has been made in Italy. You can use...
€5.53
Quick-view

O ring 15.08x2.62mm EPDM

On this product page you will find a EPDM o ring. This o ring is used in a variety of espresso machines and applications. With brands like Astoria, San Marco, Wega, La Pavoni and Brasilia. The o ring is made from EPDM. The thickness of the cord is 2,62mm and the internal diameter of the o ring is 15,08mm This part is used mainly in brewing groups with...
€1.19
Quick-view

Valve rod washer 18x6.4x1.6mm

The item on this product page is a M6 washer, this washer can be used on various steam and water valves. Such as the brands Marzocco, Royal, Carimali and San Remo. The Carimali part reference is 93.00058, the Marzocco reference is L165/9 and for San Remo it is 10402040. This flat washer is made from zinc plated steel, this is not a issue seen its not in...
€0.66
Quick-view

EPDM gasket o ring 4,47x1,78mm

The o ring on this product page can be used on various espresso machine brands such as Faema, Cimbali San Marco, Rancilio, Brasilia and Gaggia. The Brasilia part reference number are 00831.0.00.02, 0142800002  and 01428.0.00.02. The Faema part reference number is 400293000, for Rancilio it is 36401003  and for San Marco it is 109108. The o ring on this...
€0.96
Quick-view

Gicar level regulator NRL30/1E/2C/F 230V

This Gicar level regulator is one of the most simple and common level regulators you will find. This model has the current Gicar code of 9.1.40.71G. there are a lot more product codes, you can find those in the extra info tab. This Gicar level regulator has the name NRL30/1E-2C/F and runs on 230Vac. You can find this level regulator on various espresso...
€45.52
Quick-view

Flowmeter gasket o ring

It is possible that the flowmeter in your espresso machine starts to leak. On this page you will find a replacement part for most flowmeters. This is the sealing o ring which goes between the flowmeter body and the measuring device. This o ring is suitable for Digmesa and Gicar flowmeters. The cord diameter of this o ring is 1,78mm and the inner diameter...
€1.00
Quick-view

Faema E61 group infusion spring

On this page you will find a stainless steel compression spring with a outer dimension of 14mm and a length at rest of 45mm. This compression spring is being used in a variety of espresso machine brewing groups. This ranges from the famous Faema E61 brewing group, the E61 style brewing group. But also a variety of other type of brewing groups used by...
€1.62
Quick-view

Lucifer solenoid 3 way base mounting 220/240V 50/60Hz

The solenoid valve on this page is a 3 way solenoid valve, mainly with the application as a brewing group solenoid valve.  Parker has listed this part under 471012 and 471013 The coil used on this solenoid valve is a 9W 220/240V which runs on 50/60Hz. The coil number for this solenoid valve is 483510S6 The valve in question is a 3 way solenoid valve with...
€98.45
Quick-view

La Cimbali filterbasket 2 coffee 14gr

The filterbasket shown on this page is solely used on La Cimbali espresso machines. The Cimbali part references for this item are 457164000 and 1 458171000. This basket has been manufactured by the Italian company IMS Filtri and has the product number GC2T049. This stainless-steel filter basket has a outer diameter of 68mm and a overall height of 25mm....
€4.54
Quick-view

Copper gasket 22x17x1.5mm

The product on this page is a gasket, a copper one. This copper gasket is a flat gasket, so not a compression gasket. This flat copper gasket is used in a variety of espresso machines and applications. You mainly see them in the category of steam and water valve or boiler components. This gasket has a outer diameter of 22mm a inner diameter of 17 and a...
€1.12
Quick-view

E61 style camme rod

This camme rod for E61 style espresso machines is slightly different then the one used in the Faema E61. This one has a small guide pin at the end which goes inside the group. On the other side there is a squared off section for the lever arm. This section is 6x6mm. To hold the lever in place there is a M6 thread on the end for some sort of a nut. This...
€20.25
Quick-view

Locking group gasket

If you want to attach a E61 style brewing group to the espresso machine there is normally a gasket inbetween the brewing group and metal frame. In this case a 2mm paper gasket with a width of 70 and a height of 80mm. This gasket type used on a variety of E61 style brewing groups from the brands: San Remo, Royal, Reneka, La Scala, Vibiemme, Grimac, Wega,...
€5.04
Quick-view

Compression spring 14x33mm

This stainless steel spring 14x33mm is used in a variety of locations in a espresso machine. The most common location for this compression spring is in a Faema E61 brewing group of a E61 style brewing group. The spring seats inside the top trumpet and makes sure that the top brewing valve closes when the brewing process is stopped, and the lever has been...
€2.17
Quick-view

Faema E61 valve rod washer stainless

This stainless-steel washer is used in a variety of espresso machine applications. This ranges from the washers to bolt on the heating element on a La Pavoni Europiccola/Professional. To a spacer in the steam valve on a Faema E61, this also includes all version which resemble the e61 valve model like with the Vibiemme, Grimac and La Scala espresso...
€0.74
Quick-view

Boiler safety valve 3/8" 1.8 bar CE-PED

The boiler safety valve shown on this page can be used on wide selection of espresso brands such as Brasilia, Wega, Astoria, Grimac, Cimbali, Faema, Marzocco and Carimali. The part references can be found on the extra info tab. This boiler safety valve has a male 3/8” BSP-G thread. The safety valve has been set at 1,8 bar, this is not adjustable. When the...
€28.63
Quick-view

IMS double filterbasket 12/18gr B702TH24.5M

A lot of the filterbasket sizes are quite standardized. This IMS filterbasket is good example of this. The basket is made by IMS filtra, but it is a competition basket and not from the standard IMS basket line.  The IMS part number for this double filterbasket is B702TH24.5M. The double filterbasket is made from stainless steel 304, food safe. The outer...
€25.48
Quick-view

Drain valve pre-assembled 52,8mm

The drain valve on this page is used in a variety of E61 style of brewing groups. You will find this model of drain valve assembly on brands such as Bezzera, ECM Heidelberg, Isomac, La Pavoni, Brasilia, Grimac and Royal. This drain valve comes pre-assembled. The assembly contains the triangular shaped shaft, gasket holder, gasket, flat washer and the...
€15.01
Quick-view

Valve rod spring 15x17mm

The compression spring on this page knows a variety of applications with various brands. You can use this spring with brands like Vibiemme, La Scala, Faema, Spaziale and Brasilia. As for instance on steam and water valves. The part references can be found in the extra info tab This stainless-steel compression spring has a outer diameter of 15mm and a...
€1.13
Quick-view

Stainless steel group filter 14x10x12mm

On this product page you will find a brewing group water filter. This brewing group filter prevents that debris from the HX blocks the nozzles/gigleur. This type of filter is used in a variety of brewing groups. This water filter is made from stainless steel. The outer diameter of this filter is 14mm. the inner diameter is 10 mm and the height is 12mm....
€5.22
Quick-view

La Pavoni/Gaggia heating element gasket

The heating element gasket on this page can be used on various Gaggia and La Pavoni heating elements. The Gaggia part reference for this gasket is 4027001000 and for La Pavoni the reference is 361000  This gasket is made from a fibre material. The outer dimensions are 70x70mm and a thickness of 2mm. the internal hole is 40mm.
€3.02
Quick-view

History of La Pavoni Macchine da Caffé

La Pavoni is one of the oldest and most prestigious espresso machine manufacturers in the world, with a history dating back to 1905. The company was founded in Milan, Italy, and quickly became known for producing innovative espresso machines. In its early years, La Pavoni focused on vertical espresso machines powered by boiler pressure. These machines revolutionized coffee brewing, making it possible to extract rich, flavorful espresso with consistency.

After World War II, La Pavoni introduced the Model D.P. 47, designed by renowned architect Gio Ponti. This model marked a turning point for the company, which began incorporating lever brewing groups into their machines. Early examples include the La Pavoni Lilliput, La Pavoni Model 53, La Pavoni Concorso, and later, the La Pavoni Brasilia. To this day, La Pavoni continues to manufacture commercial lever-operated espresso machines, showcasing its commitment to tradition and quality.

La Pavoni Espresso Machine Models

Over the years, La Pavoni has developed a wide range of both commercial and domestic espresso machines. However, the brand has gained more popularity for its domestic coffee machines, which can be either lever-operated or semi-automatic. These machines are prized for their elegance, reliability, and the rich, flavorful espresso they produce.

La Pavoni Europiccola

One of the most iconic espresso machines ever made is the La Pavoni Europiccola. This lever-operated machine was first introduced in the 1960s and has remained in production ever since. It features a steam tube for frothing milk and delivers a classic espresso experience. Over the years, the Europiccola has undergone some design changes and improvements, but the fundamental structure of the machine has remained the same. For those in need of spare parts, La Pavoni Pub Parts is a great resource.

La Pavoni Professional

The La Pavoni Professional is essentially a larger version of the Europiccola. It comes equipped with a bigger boiler and, in its earlier versions, a thermostat. Despite its name, the Professional model is not designed for commercial use but is rather intended for domestic settings, offering more capacity than the Europiccola. One of the key advantages of the La Pavoni Professional is that many of its spare parts are interchangeable with the Europiccola. If you need specific parts for this model, visit La Pavoni Bar Parts.

Portafilters and Brewing Groups

The type of portafilter you need for your La Pavoni espresso machine depends on the model you have. For domestic lever espresso machines, it’s important to know whether you have a pre-millennium or millennium brewing group, as the portafilters for these models are not interchangeable. This distinction is also true for La Pavoni’s semi-automatic domestic models, which require a different portafilter size than the lever-operated machines.

Commercial La Pavoni espresso machines use larger portafilters, which are not compatible with the domestic models. When sourcing spare parts, it’s crucial to ensure that you have the right portafilter for your machine. You can find a range of La Pavoni portafilters for both domestic and commercial machines at Brooks Parts.

La Pavoni Spare Parts at Brooks

At Brooks Parts, we offer a wide selection of spare parts for La Pavoni espresso machines and coffee grinders. Whether you need original parts or aftermarket replacements, we have a variety of components available to meet your needs. From electrics and filter baskets to flowmeters, heating elements, and manometers, our catalog is organized by category, making it easy to find exactly what you need.

If you’re unable to find the part you’re looking for, feel free to reach out to us, and we’ll do our best to help you find the right component for your La Pavoni machine.

Conclusion

La Pavoni’s legacy in the espresso world is unparalleled, with a history of producing high-quality machines that have stood the test of time. Whether you're a home barista using the Europiccola or Professional, or you're maintaining a commercial-grade machine, finding the right parts is essential to keeping your espresso machine running smoothly. Brooks Parts is your go-to source for La Pavoni spare parts, ensuring that you can continue to enjoy your machine for years to come.