0
My cart
Vibiemme espresso machine parts
Faema E61 sleeve
On this page you will find a camme guide bushing. This part is a generic part for Faema E61 brewing groups and the brewing groups made in the E61 style. This part is made from brass with a total length of 28mm, the outer dimensions are 15 and 10 mm. The ID is 8mm and the head of the bushing has a thickness of 5mm.
This part slides over the shaft off the...
€3.16
Filterbasket 1 coffee 6gr 70x19.5mm
The single filterbasket model shown on this page is mainly used on Astoria and Wega espresso machines. Note: this basket can be used on any portafilter which has a similar 70mm outer diameter filterbasket. This single coffee filterbasket has been made by the Italian filterbasket manufacturer IMS Filtri, their reference number for this item is CM1T007....
€5.13
Thermal protector for vibration pump
This is a extra layer of protection for your Ulka espresso machine vibration pump. When your pump is running dry or way too much then specified, the temperature will rise and eventually electrical components will break down. With this thermal protector your vibration pump will be saved, but the thermal protection will fail. This specific model has a max...
€10.46
Faema E61 expansion valve guide
The item on this page is a gasket holder for various espresso machine brands, such as Vibiemme and Faema. The part reference for this item is for Faema 4151018538 and for Vibiemme RACCPOGVAESE,
This brass gasket holder has a outer diameter of 17mm/8,6mm and a internal diameter of 6mm. the height is approx. 9 and 6mm. this item has been made in...
€4.64
Asco pressure switch P303/T01 3 phase 20A
The P303T01 a more lightweight 3 phase pressure switch then the Asco P302/6 3 phase pressure switch. The difference is also that the P302/6 has a partially metal cover. And the P303T01 has a full plastic cover.
This pressure switch has been used espresso machines like: Bianchi, Fiamma and Orchestrale.Nowadays these pressure switches are named Asco, in the...
€88.64
Faema E61 plug for camme holder
This ½” chrome plated stuffing nut has a central hole of 10,7mm. The item itself has a height of 17mm. You need a metric key 22 to install this item. This is quite a common key size in most peoples toolbox. But what is the function of this part and where can it be found.
This threaded stuffing gland is used in the side of the Faema E61, Faema E61 Legend...
€8.92
Thermostat single phase TR/86
The thermostat on this page is a single phase thermostat used in various domestic Vibiemme espresso machine models. The Vibiemme part reference for this item is ELETTEDOMJU2B.
This single phase thermostat is adjustable thermostat. The capillary has a length of 1600mm. the bulb has a diameter of 6,5mm and a length of 90mm.
You can use this single phase...
€26.14
Microswitch Rold VRSRB1DA1
This microswitch can be used with a huge variety of coffee grinders. This ranges from Casadio, San Marco, La Cimbali, Vibiemme, Cunhill, Eureka, La Spaziale, Brasilia and so on. For the complete list check the extra info tab for brands, models and product codes
The specific microswitch is mainly used as a doser microswitch in the coffee doser. This...
€6.06
Ball valve 1/4M 1/4F
The item on this page is a ball valve. This ball valve can be used on a variety of espresso machine brands such as Gaggia, Victoria Arduino, La Pavoni, Nuova Simonelli, La Spaziale, Grimac, La Scala, San Marco and Royal.
This ball valve has been made from chrome plated brass. This valve has a both ¼” BSP-G fittings. But one is male and the other one is...
€11.17
Gasket AFM 34 22x16x2mm
The most common location for this to seal off the 3/8” male nut on the top of the Faema E61 and E61 style brewing groups like with Bezzera, Brasilia, Grimac, La Scala, Vibiemme and Wega.But also as a gasket to seal off boiler components with brands like Vibiemme and Grimac,
This gasket has been made from the material AFM 34 made by the german company...
€1.36
PTFE gasket 3/8" 22x16.5x2mm
The item on this product page is a PTFE gasket. This gasket is used on a variety of brands with applications such as steam and water valves, sight glasses and brewing groups. you can use this PTFE gasket on brands such as ECM Heidelberg, San Remo, Vibiemme, La Scala, Rancilio and Grimac. The part reference numbers can be found in the extra info tab.
This...
€1.31
Vibiemme heating element 1600W 230V
On this page you will find a heating element suitable for the Vibiemme Domobar Junior (part number: ELETRESD1625). This element has a brass flange and a copper element. The element itself has a wattage of 1600W with a voltage of 230V. The immersed length of the element is 95mm. The flange has a OD of 1” ¼” . The element connection has 2 poles, these 2...
€71.42
Parker 2 way solenoid valve 1/8" 1/8" 230V
On this page you will find a 2 way solenoid valve manufactured by the company Parker, this specific valve has been produced in Italy. This solenoid valve is mainly used as a water inlet valve and a steam and water valve solenoid. The Parker part numbers for this item are 397442 and 397443.
This solenoid valve is a version which has a female threaded in...
€104.03
Vibiemme level probe 140mm
The item on this product page is a level probe which can be used on a variety of Vibiemme espresso machines. The Vibiemme part refence number for this item is ELETSON.
This level probe has a male ¼” fitting and a overall length of 140mm. This level probe has a 90 degree angle at the connector.
This level probe can be used on a variety of Vibiemme espresso...
€13.09
Vibiemme brewing group spray nozzle 21mm m6x1mm
The spray nozzle on this product page does look one which is common, but the thread size on this model is only used on various Vibiemme espresso machines. The VBM part reference number for this spray nozzle is RACCSPGRKO
The item itself is made from machined brass and has a diameter of 21mm. The thread on this item is a male M6 thread with a pitch of...
€7.17
Boiler pressure gauge ø41mm 0-2.5bar with capillar
On this product page you will find a boiler pressure gauge suitable for the Vibiemme Domobar Super. This manometer has the Vibiemme part reference MANMSEM.
The manometer is a boiler pressure manometer with a reach from 0 to 2,5bar. The body of this manometer has a outer diameter of 41mm and a rim diameter of 50mm. On the back is a copper tube with a...
€27.43
Boiler safety thermostat 130°C
On this page you will find a boiler contact thermostat. This boiler contact thermostat is suitable for a variety of brands like Bezzera, la Marzocco and Vibiemme.
But what does a boiler contact thermostat do. Well a contact thermostat is fitted against the object with it’s metal bottom side. When the temperature off a boiler becomes above the 130 degree...
€17.55
Vibiemme infusion valve 62mm
This brewing valve is a complete valve assembly suitable for the Vibiemme E61 style lever brewing group.This complete valve exists out of 5 components. The triangular rod, a gasket holder, the gasket, a small brass washer and the square valve pin. All espresso machine parts make the total length of the valve assembly 62mm.The Vibiemme part number for this...
€18.42
Vibiemme Lollo water/steam tap
On this product page you will find a chrome plated steam and water valve suitable for the Vibiemme Lollo espresso machines. The Vibiemme part reference of this item is ASSRACCRUBLOLLO
This steam and water valve has been made from brass and chrome plated afterwards. The in and outlet fittings are on both sided a 3/8”BSP-G thread. This...
€91.81
Valve assembly for steam valve
The item on this product page is a valve gasket part which can be used on various espresso machine brands such as ECM Heidelberg, Grimac, Fiorenzato, Marzocco and Vibiemme. The ECM Heidelberg part reference is P6003.9, the Fiorenzato reference is A2200203, The Grimac reference is A2200203, the Marzocco reference is B.1.004/9 and finally the part...
€8.03
Steam and water valve complete
This steam and water valve is one of the most common models found on commercial espresso machines. They can be found on brands such as San Remo, La Scala, ECM and Brasilia espresso machines.
This steam and water valve has on the inlet side a conical shape, so for flared tubing. This valve has been manufactured in Italy.
You can find this steam and water...
€46.08
Water stem complete
The item on this page is a complete water stem. This item can be used on variety of espresso machines such as San Remo, Vibiemme, La Scala, Grimac, Pavoni, Rocket and Gaggia.
This water stem has a 1/8” BSP-G female thread. The water stem does have the filter membrane inside, this can be replaced. The item has been made in Italy.
This water stem can be...
€7.57
How to find the correct Vibiemme spare part
Vibiemme, also known as VBM, has produced different espresso machine generations. Components can vary depending on model, production period, boiler configuration and electrical version.
The recommended selection order is:
OEM reference → Vibiemme model → version → component type → technical specifications → component manufacturer → origin → product
A similar appearance or dimension does not automatically confirm compatibility.
Vibiemme spare parts by machine model
Select the correct machine family before choosing individual components.
- Vibiemme Chimaera parts
- Vibiemme Cubo parts
- Vibiemme Domobar Junior parts
- Vibiemme Domobar Super parts
- Vibiemme Dosaplus parts
- Vibiemme Evolution parts
- Vibiemme Kometa parts
- Vibiemme Lollo parts
- Vibiemme Mercury parts
- Vibiemme Minimax parts
- Vibiemme Replica parts
Vibiemme brewing group parts
Many Vibiemme machines use E61-style brewing groups. Common replacement parts include group gaskets, portafilter gaskets, shower screens, valves, springs and seals.
Verify:
Reference → machine model → group type → dimensions → mounting interface
Vibiemme pumps, valves and electrical parts
Hydraulic and electrical components require accurate matching. Check voltage, connections, dimensions and original reference before ordering.
Original Vibiemme parts and compatible replacements
Brooks Parts supplies OEM/original Vibiemme parts and Compatible (non-original) replacements.
A compatible component can replace a Vibiemme reference without being manufactured by Vibiemme.
Machine manufacturer and component manufacturer
Vibiemme is the espresso machine manufacturer. Individual components such as pumps, valves and electronics can be produced by specialist manufacturers.
Vibiemme machine → model → component manufacturer → reference → specifications
Before ordering Vibiemme parts
- Exact Vibiemme model
- Version or production period
- OEM reference
- Voltage and power
- Connections
- Dimensions
- Mounting configuration