La Cimbali - Steam/water valve
La Cimbali - Steam/water valve
There are 35 products.The steam and water valves used on La Cimbali espresso machines are almost the same over the years. There are small differences in the valves for some models. Such as a conical or flat inlet of the valve or a steam/water outlet on the La Cimbali M39 which is on a 90 degree angle where as the “Standard” size is slightly sloped. Besides this valve you also got solenoid valve operated water outlets.
How does the manual la Cimbali steam valve work? The valve itself has a body, with threads on the inside. In that valve you can screw a steam/water valve shaft. This shaft already has the sealing o rings and gaskets installed to it(there are 2 versions, with and without screw to hold the gasket). To hold the shaft in place, to prevent accidental removal, there is a washer and a C clip installed.
The steam and water tubes used on La Cimbali espresso machines do vary a lot. The water tubes vary in size and length and if they have a water filter inside of them. The Steam tubes have remained over time relatively the same, do pay attention to the thread type of the steam tip. The steam tube and water tube do always have a protective rubber sleeve over them.
The steam and water valves have for almost every espresso machine model a different type of knob. These knobs can vary for the models such as the Cimbali M28, Cimbali M29, Cimbali M30, Cimbali M15 and the Cimbali M21. This spring is held in place with a steel D shaped spring.
La Cimbali steam water valve
(0) The steam and water valve on this page is used on most La Cimbali espresso machines. But you can find this model as well on Casadio and Faema espresso machines. For the part references check the extra info tab on the side. This complete steam and water valve has been casted out of brass and machined afterwards. The valve has 2 connections. For the steam...
La Cimbali M39 steam water valve
(0) This steam water valve is suitable for the La Cimbali M39 and the La Cimbali M39-GT. What is different then the other La Cimbali steam valve? The steam valve of the M39 has a 90 degree outlet and the standard steam valve has a 120 degree orientation. This steam valve is a ready to install steam valve. The valve comes including all the internals.
La Cimbali M39 stainless steel steam pipe
(0) On this page you will find a complete stainless steel steam tube for the La Cimbali M39 and La Cimbali M39 GT espresso machine. The part reference of this item matches the Cimbali part reference 985-748-000. This steam tube has been made from stainless steel. The tube itself has a diameter of 10mm, to protect your fingers from burning there is a rubber...
Cimbali Faema unit tap shaft
(0) On this page you will find a assembled steam and water valve shaft for various La Cimbali, Faema and Casadio steam and water valves. The part number for this item is with Casadio 485910010, for Faema 485751010 and La Cimbali 985-710-010. For the complete part reference number list check the extra info tab. This brass valve shaft comes completely...
PTFE gasket 20x17x2mm
(0) This flat PTFE gasket shown on this page is used on a variety of espresso machine brands in the steam and water valves. This gasket can be used on the San Remo, Royal, Brasilia and ECM Heidelberg espresso machines. This flat PTFE gasket has a outer diameter of 20mm a inner diameter of 17mm and a thickness of 2mm. This gasket has been manufactured in...
O ring gasket FKM 10.78x2.62mm
(0) On this page you will find a o ring with the dimensions 10,78x2.62mm. It is made from FKM (viton is a registered trade brand, but the material is identical) This o ring is used in a variety of locations in espresso machines. It is used with steam and water wands in espresso machines with brands like: Marzocco, Casadio, Vibiemme, Grimac, Cimbali and Faema....
O ring gasket 6x1.2mm
(0) The o ring on this page is used to seal off the steam tip from the steam wand at the bottom. You can find this o ring with a variety of brands like Spaziale, Astoria and Wega espresso machines. With the part numbers of Spaziale 08354, Astoria 12300013 and Wega WY12300013. This o ring has a cord diameter of 1,2mm and a internal diameter of 6mm. The o...
Gasket FKM 12x3.5x4mm
(0) The gasket on this page has a green colour instead of the typical black colour. This gasket is made from green FKM (FKM is available in variety of colours). You will find this gasket in the steam and water valves of the La Cimbali and Casadio. The matching part numbers for this item are for Casadio 400274020 and for Cimbali 400-274-020 This...
La Cimbali handle big spring
(0) The spring on this page is used a handle spring on a variety of espresso machine models manufactured by the Cimbali group. This spring keeps pressure on the internals of the handle which hold the handle in place. The Cimbali part number for this item is 485-154-000 and the Casadio part number is 485154000 The spring itself is made from spring...
Tap joint gasket 14.5x7.5x6 mm
(0) On this page you will find a PTFE gasket which is the coupling between the steam and water valve ball and the compression spring inside the valve assembly. This item has the Casadio part number 485078010, the La Cimbali part number 485-078-010 and the Faema part number 485078010. This PTFE gasket, it is not white as you would expect with PTFE, has a...
O ring gasket 10.82x1.78mm
(0) On this page you can find a o ring which is in use with a variety of brands in various configurations. You can find this o ring in water and steam taps, boiler components and in water level assemblies. This o ring is made from EPDM. The used cord diameter is 1,78mm and the internal diameter of the o ring is 10,82mm. This o ring can be used on steam and...
La Cimbali faema tap joint spring 11x24mm
(0) On this product page you will find a stainless-steel water and steam valve compression spring. This spring has multiple purposes. It holds the steam and water wand at a fixed location and keeps pressure on the PTFE ball gasket. This compression spring can be used with the brands Casadio (485061010 ) Cimbali (485061010) and Faema (485061010) This...
Stainless steel steam stem 4 holes 1,5mm
(0) On this page you will find a steam nozzle which can be used in combination with some models of Faema, Casadio and La Cimbali. The steam tube has a female 1/8”BSP-Gt thread. On each side of the steam tip there are 4 holes, all of them have a diameter of 1,5mm. There are 2 flattened spots on the nozzle, so that you are able to install a spanner on...
Stainless steel steam stem 2 holes 1,5mm
(0) On this page you will find a steam nozzle which can be used in combination with some models of Faema, Casadio and La Cimbali. The steam tube has a female 1/8”BSP-Gt thread. On each side of the steam tip there are 2 holes, both have a diameter of 1,5mm. There are 2 flattened spots on the nozzle, so that you are able to install a spanner on it when...
O ring 25,07x2,62mm EPDM
(0) The o ring on this product page is used on various Brasilia steam and water valves on various models. The Brasilia part references for this item are 05825.0.00.02 and 0582500002. This o ring is made from EPDM. The cord diameter is 2,62mm and the internal diameter is 25,07mm. This o ring is made in Italy. You can use this o ring on the...
Stainless steel steam stem 3 holes 1,6mm...
(0) On this page you will find a steam nozzle which can be used in combination with some models of Faema, Casadio and La Cimbali. Note: this steam nozzle has a male thread, so if your original steam nozzle has a male thread as well they are compatible. The steam nozzle has in a circular pattern 3 holes and in the middle a additional one. So I ottal 4...
Steamtube anti scorch clip
(0) The steam tube grip on this page is suitable for steam tubes of 10mm in diameter. If you click this steam tube around your stainless steel or chrome plated steam tube you will never have the issue of burning your hands on the tube. This rubber grip has part references to Brasilia espresso machines 11972.0.00.02 and San Remo espresso machines with...
