The boiler gasket on this page is used for a variety of Gaggia espresso machines. From the antique ones all the way to the modern ones. The Gaggia part references for this item are 4027014000 and CA0321/01. This boiler gasket has been made from AFM34 from Victor Reinz. This gasket has a outer diameter of 220mm a inner diameter of 168mm and a...
The item on this product page is a crushable copper gasket. This gasket can be used with a variety of espresso machine brands such as Casadio, ECM Heidelberg, La Scala, Cimbali, Faema, Astoria, Nuova Simonelli, Pavoni, Wega and Rancilio. This crushable copper gasket has a outer diameter of 18mm a inner diameter of 14mm and a thickness of 2mm. This gasket...
The most important part on a espresso machine is the safety valve. This part prevents that a boiler can explode. The safety valve will open up when the pressure inside the boiler becomes too high. This specific safety valve is made out of brass. The thread type used for this safety valve is 3/8”BSP-G. The calibrated pressure of the valve is 2.0...
On this page you will find a boiler safety valve 3/8” male with a present of 1,8 bar. This safety valve is, at own responsibility, adjustable. This can be done by tightening or untightening the Allan key slot in the top of the valve. Inside this safety valve has a stainless steel spring inside, the sealing material is FKM. This is a non certified...
On this product page you will find a anti vacuum valve. This valve is made completely out of brass and can be easily disassembled. This type of anti vacuum valve is used with quite a lot of espresso machine brands. This valve has a male ¼”BSP-G thread. The o ring inside the valve is made from HNBR, but the o ring end stop is made from PTFE....
This type of anti vacuum valve is one of the most common valves around. This valve is suitable for a variety of espresso machine brands like Casadio, La Carimali, San Marco, San Remo, La Cimbali, Grimac, La Spaziale and so on. This anti vacuum valve has a male ¼”BSP-G thread. The body of this anti depression valve has been made out of...
The anti-vacuum valve on this page can be used on various espresso machine models of the brand San Remo. The anti vacuum valve has the San Remo part reference of 10652040A This anti vacuum valve has been made from stainless steel. The thread used is a male ¼” BSP-G thread. This stainless steel anti vacuum valve has been made in Italy...
The item on this product page is a anti vacuum valve. This valve can be used on espresso machine brands such as ECM Heidelberg and Isomac. But basically on every espresso machine which has a ¼” connection it can be installed. The ECM Heidelberg part reference number is P2561 and the Isomac part reference number is IS000263. This...
A Anti vacuum valve is used to prevent that the pressure switch is kicked in too early when heating up. This anti vacuum valve has a male screw thread of ¼” BSP. A anti vacuum valve exists out of multiple components. The body with the threads, in this case made from stainless steel. The plunger, made from brass. This plunger has also the...
The boiler safety valve shown on this page can mainly be found on La Pavoni espresso machine boilers. The La Pavoni part reference for this item is 395221G This boiler safety valve has a male 3/8” BSP-G thread. The pre-set pressure is 1,8 bar and nonadjustable. The seal used is a FKM seal, when opened the steam outlet is 872 L/M. This valve is CE...
The item on this page is a OEM/original Gaggia/Saeco spare part spare part. It is a gasket holder, which is used in combination with the lip seal. To seal off the connection to the water tank. The Gaggia part reference number 0701.014.150. The Saeco part reference numbers are 0701.014.150 and 149185359. This gasket holder is made from black plastic...
The item on this product page is a OEM/original L hose fitting. This fitting is used on brands such as Gaggia and La Pavoni. The Gaggia part reference number is WGA5001021000 and for Pavoni it is 479052. This L fitting is made from PVC. The external diameter is 16mm and the internal diameter is 12mm. It is used for the drain tank. This item is made...
The heat exchanger on this product page is a OEM/Original Gaggia spare part. This item has the Gaggia part reference number of CA0433/A. This heat exchanger is made from copper. The outer diameter is 40mm and the overall length of this heat exchanger is 210mm. You can use this heat exchanger on the Gaggia D90 and the Gaggia E90
Cookie | Provider | Purpose | Expiry |
---|---|---|---|
PHP_SESSID | brooks-parts.com | The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. | Session |
PrestaShop-# | brooks-parts.com | This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. | 480 hours |