Gaggia E90/D90 TE/TD XE/XD

This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal...

The item on this product page is a shower holder which can be used on various Saeco and Gaggia espresso machines. The Gaggia part reference numbers for this item are 16G1002  and WGA16G1002. The Saeco part reference number for this item is WGA16G1002. This shower holder diffuser has been made from brass. The external diameter is 57mm and the height...

On this page you will find a copper gasket which you will mainly find on a variety of San Remo espresso machines. Mainly in boiler and hydraulic systems of the San Remo. The San Remo part reference of this part is 10852180. This flat copper gasket has a outer diameter of 19mm a inner diameter of 13,5mm and a thickness of 1,5mm. This copper gasket is made...

On this product page you will find a contact thermostat which is used on a variety of espresso machine brands. You will find this contact thermostat on Brasilia, Gaggia and Isomac espresso machines. The part references are for Brasilia 09415.2.00.08, Gaggia WGADM1561 and for Isomac IS000281.  This contact thermostat is set at 100°C and is a...

The product on this page is a solenoid valve connector, large F fitting. With this connector you can seal off and connect your wiring and solenoid valve to each other. These connectors can be used on all types of standard solenoid valve coils. Where the positive and negative are spaced apart approx. 17mm. This solenoid valve connector can be basically...

On this product page you will find a group locking gasket which has been used for various Gaggia brewing groups. This square brewing group gasket does not have a Gaggia part reference. This gasket has been made from a universal fibre gasket. The gasket is square and is 67x67mm. The thickness of this gasket is 2mm. The gasket has been made in Italy. You...

The product on this page is a Allen head screw for attaching a solenoid valve to a other surface. This type is a M4x10mm. It is a stainless-steel bolt according to UNI 5931 - DIN 912 - ISO 4762 You will only need this type of Allen head screw to attach the flanged solenoid valves to a flat surface. This type of Allen screw is used in a lot of espresso...

Every brewing group uses a portafilter gasket. In this case it is a 73x57x9mm gasket. In this case they are made from a food grade nitrile butadiene rubber(Nbr) The OD and ID of 73x57mm is quite a standard size. You will see this size with brands like Expobar, Vibiemme (VBM), La Scala, Bezzera, Faema and Azkoyen. This doesn’t mean that these brands don’t...

The portafilter gasket on this page can be used on various commercial Gaggia espresso machine brewing groups. The Gaggia part reference for this item is WGANG01/001/B. This portafilter gasket has been made from NBR. The outer diameter is 72mm the inner diameter is 56mm and the thickness is 8,5mm. This gasket can be used on various brewing groups used...

The pilot light on this product page is one in the colour red. This type of pilot light can be used on the various brands such as La Scala and Grimac. The Grimac part reference numbers are 1160600004, MG077 and V277. This red pilot light runs on 230V. the head has a diameter of 13,5mm and the required mounting hole needs to be 10mm. this item...

The portafilter gasket shown on this product page is one of the most common sizes found on commercial espresso machines. But this gasket hasn’t been made from NBR as traditionally done, but from food grade silicone. You can find this portafilter gasket on brands such as Faema, Vibiemme, Bezzera and La Scala. This red silicone gasket has a outer diameter...

On this page you will find a solenoid valve made by the parker company. This specific solenoid valve is a 3 way valve. The Parker part numbers for this item are 393117J and 393122J This specific 3 way valve is one of the flanged series. This flange seals off with 2 small o rings.  The valve runs on 230V at 50/60Hz, the coil used on this valve is the...