Filter by
Shop by Manufacturer
Filter

HoReCa Spare Parts for Commercial Equipment

Find spare parts for professional kitchen, foodservice, refrigeration and vending equipment. Use the Categories filter to narrow the assortment by equipment or component type, or use Shop by Manufacturer to select the relevant machine or component brand.

If you already know the OEM or component reference, use it as a primary identification point and then verify the exact machine model, version and technical specifications. For coffee-specific parts, browse our dedicated Espresso Machine Parts, Coffee Grinder Parts or Vending Machine Parts.

Pin for Arm Assembly

This arm assembly pin is made in Italy and ensures reliable and secure attachment for the wash or rinse arm assemblies in professional dishwashers. Designed for long-lasting performance and precision fit. Key Features: Made in Italy Precision-engineered for durability Suitable for commercial dishwashers Compatible with: AMIKA: 8XLE (hood...
€69.59
Quick-view

Wash Arm Assembly – Fagor

Wash Arm Assembly – Fagor This wash arm assembly is ideal for maintaining high efficiency in commercial dishwashing systems from Fagor. Type: Wash Arm Assembly Compatible with Fagor dishwashing systems Made in Italy Compatible models include: 00707-), FI-100AR (200707-), FI-100B (200707-), FI-100BBT-UK (200707-), FI-120AR+DD (200707-), FI-120B...
€38.08
Quick-view

Rinse Arm Assembly 380 mm – Generic

Rinse Arm Assembly 380 mm – Generic This rinse arm assembly is ideal for maintaining high efficiency in commercial dishwashing systems from Generic. Type: Rinse Arm Assembly Length: 380 mm Compatible with Generic dishwashing systems Made in Italy Compatible models include: Adler We are Brooks-Parts, your go-to supplier for spare parts for Horeca...
€103.24
Quick-view

Hub Complete for Washing Arm Assembly – Hobart

This hub complete for washing arm assembly is a genuine OEM spare part made in Slovenia, designed specifically for use in Hobart commercial dishwashers and hood-type dishwashers. Identified by OEM part number 734804-1, it ensures a secure fit and long-lasting reliability in high-performance wash systems. Key Features: OEM Hobart spare part: 734804-1...
€138.66
Quick-view

Rinse arm assembly 440 mm for dishwashers

This 440 mm rinse arm assembly is made in Italy and built for high-performance commercial dishwashers and glasswashers. Crafted for durability and consistent water flow, it’s compatible with a wide selection of machines by AMIKA, COLGED, EUROWASH, and WOLK. Key Features: Length: 440 mm Made in Italy Durable stainless steel construction Ensures...
€64.49
Quick-view

Rinse arm assembly 463 mm for dishwashers

This 463 mm rinse arm assembly is made in Italy and engineered for efficient water distribution and long-lasting performance in commercial dishwashers and glasswashers. Suitable for multiple models across AMIKA, APACH, COLGED, and WOLK brands. Key Features: Length: 463 mm Made in Italy High-quality durable construction Ensures optimal rinse...
€131.15
Quick-view

Rinse arm assembly 470 mm Meiko dishwasher

This 470 mm rinse arm assembly is precision-manufactured in Germany, designed to ensure superior rinsing performance in professional dishwashing applications. It is a genuine OEM Meiko spare part (9542558) and is fully compatible with a wide range of Meiko dishwashers and hood-type models. Key Features: Length: 470 mm OEM Meiko part number: 9542558...
€563.16
Quick-view

Rinse arm assembly 475 mm Meiko dishwasher

This 475 mm rinse arm assembly is precision-manufactured in Germany, designed to ensure superior rinsing performance in professional dishwashing applications. It is a genuine OEM Meiko spare part (9542559) and is fully compatible with a wide range of Meiko dishwashers and hood-type models. Key Features: Length: 475 mm OEM Meiko part number: 9542559...
€537.74
Quick-view

Rinse arm assembly 498 mm Winterhalter dishwasher

This 498 mm rinse arm assembly is engineered in Germany to deliver optimal rinsing efficiency for professional dishwasher systems. Manufactured as a genuine OEM Winterhalter spare part (60003515), it provides reliable performance in heavy-duty operations. Key Features: Length: 498 mm OEM Winterhalter part number: 60003515 Made in Germany...
€270.48
Quick-view

Rinse arm assembly complete 440 mm for professional dishwashers

This complete rinse arm assembly is designed to provide thorough rinsing performance in commercial dishwasher and glasswasher models. Manufactured in Italy, it offers outstanding quality and compatibility across a wide range of professional machines. Key Features: Complete rinse arm assembly Premium build quality Made in Italy Ensures optimal...
€71.38
Quick-view

Rinse arm assembly Hobart complete 01-240096-4

This complete rinse arm assembly is an original Hobart part (OEM 01-240096-4), specifically engineered for long-term reliability and excellent performance in commercial hood-type dishwashers. Built for precision and durability. Key Features: Complete rinse arm assembly OEM Hobart part: 01-240096-4 Designed for high-efficiency rinsing Suitable for...
€596.49
Quick-view

Fagor rinse arm assembly 460 mm OEM 12111791

This rinse arm assembly is an original OEM part from Fagor (part number 12111791), crafted for use in a wide range of Concept EVO dishwasher and hood-type dishwasher models. Manufactured in Spain, this component ensures high performance and compatibility in commercial environments. Key Features: Length: 460 mm OEM Fagor part: 12111791 Manufactured...
€462.01
Quick-view

Upper wash arm support with spindle – DIHR, Kromo

This upper wash arm assembly support comes complete with a spindle and is manufactured in Italy to meet high standards of quality and durability. It is designed for seamless integration into select DIHR and Kromo dishwasher and hood-type models, ensuring reliable support for the upper wash arm during operation. Key Features: Complete with spindle...
€34.70
Quick-view

Wash & rinse arm 310 mm – IME Omniwash, AFI, HILTA

This wash and rinse arm assembly measures 310 mm and is manufactured in Italy. It’s designed for use in a wide range of compact commercial dishwashers and glasswashers. Known for durability and precision, this part ensures efficient washing and rinsing cycles. Key Features: Length: 310 mm Made in Italy Suitable for wash and rinse function...
€167.17
Quick-view

Wash & rinse arm 490 mm – Kromo, Dihr

This wash and rinse arm assembly is 490 mm long and manufactured in Italy, ensuring excellent build quality and performance. It is suitable for commercial dishwashers and hood-type models, supporting consistent and efficient cleaning cycles. Compatible with a variety of Kromo and Dihr models. Key Features: Length: 490 mm Made in Italy Suitable for...
€511.63
Quick-view

Wash & rinse arm 500 mm – Sammic OEM 2319310

This wash and rinse arm assembly, measuring 500 mm, is manufactured in Spain and delivers durable and reliable performance in professional kitchen environments. It is an original Sammic spare part, ensuring a precise fit and optimal functionality for various undercounter and hood-type dishwashers. Key Features: Length: 500 mm Made in Spain Original...
€221.01
Quick-view

Fagor Wash Arm 490 mm – OEM 12025122

This 490 mm wash arm assembly is an original OEM spare part by Fagor, manufactured in Spain. Designed for reliable performance and easy installation, it ensures optimal cleaning across a broad spectrum of Fagor dishwashers and hood-type machines. Key Features: Length: 490 mm OEM Fagor part number: 12025122 Made in Spain High-quality construction...
€60.93
Quick-view

Lamber Wash Arm 550 mm – OEM 0500501

This 550 mm wash arm assembly is a genuine OEM part from Lamber, manufactured in Italy. Built to meet commercial-grade standards, it guarantees long-lasting performance and effective water distribution during wash cycles. Key Features: Length: 550 mm OEM Lamber part number: 0500501 Made in Italy Heavy-duty stainless steel construction Designed...
€192.10
Quick-view

Meiko Wash Arm 720 mm – OEM 9600672

This 720 mm wash arm assembly is a genuine OEM spare part manufactured in Germany for Meiko commercial machines. Designed for exceptional reliability and cleaning efficiency in demanding HoReCa environments. Key Features: Length: 720 mm OEM Meiko part number: 9600672 Made in Germany Durable stainless steel Ideal for high-capacity utensil and...
€661.30
Quick-view

Meiko Drum Wash Arm Assembly

Wash Arm Assembly – Drum Type Drum-style assembly Made in China Robust design suitable for commercial use Efficient rinse and wash performance Compatible with: MEIKO – DishwashersFV40.2, FV60.2 MEIKO – Dishwasher hood typeDV120.2, DV125.2, DV200.2, DV80.2 MEIKO – Glasswasher/CupwasherFV40.2G, FV40.2M
€49.42
Quick-view

Wash Arm Assembly Support for ANGELO PO, DIHR, KROMO Dish Units

his wash arm support holds the wash arm steady and in place during each cleaning run. It helps the arm spin as it should, ensuring clean, hot water hits all items inside the unit. Built for pro dish systems in kitchens that clean nonstop. This item is strong, simple to fit, and made in Italy. Fits these dish units: ANGELO PO – KD100, KD100A, KD100PSD...
€52.15
Quick-view

Wash Arm Assembly Support for Hobart Dish Units – OEM Part

his OEM Hobart wash arm support holds the wash arm steady during each wash run. It helps the arm spin with full water flow, making sure all dish items get cleaned well. The part is made for pro kitchens where gear must run day in, day out. Built from strong, heat-safe material, made in Italy, and simple to install. This is the exact part from Hobart – not...
€137.05
Quick-view

Wash/Rinse Arm Assembly 485 mm for UNIVERBAR Dish Units – OEM Part

This 485 mm wash/rinse arm assembly is made for UNIVERBAR dish units. It ensures clean spray from end to end, helping to rinse dishes fully during each wash run. The arm fits both standard dish units and hood-type machines. Built from strong, heat-safe material for long use and made in Italy. This is the original OEM item – not a copy. Main features:...
€279.38
Quick-view

Wash/Rinse Arm Assembly 550 mm for ELFIOMEX-ALFA Dish Unit – OEM Part

This 550 mm wash/rinse arm ensures full water spread during the wash and rinse phases. Built for use in ELFIOMEX-ALFA dish gear, it fits snugly and helps keep each cycle clean and steady. The arm is shaped for strong flow across racks of all sizes. Made with strong, heat-safe material and built for long use. 100% fit – made in Greece. Main features: OEM...
€702.88
Quick-view

How to find the correct HoReCa spare part

Professional catering equipment contains mechanical, electrical, hydraulic, gas and refrigeration components. Many parts can look similar while using different dimensions, connections or electrical specifications. Start with the information you already have and narrow the assortment using the category and manufacturer filters.

Where available, a useful identification order is OEM or component reference → manufacturer → exact machine and model → version or production period → component type → technical specification → OEM/original or compatible → product.

For components that are used across different machine brands, the component manufacturer's own reference and technical interface can be more useful than the equipment brand alone.

Filter HoReCa parts by category

Use the Categories filter when you already know the equipment type or the type of component that needs to be replaced. Brooks Parts groups both complete equipment applications and technical component families within the HoReCa assortment.

The category is the first refinement step. Within a category, continue comparing the specifications that determine compatibility for that particular component.

Filter by manufacturer

Use Shop by Manufacturer when the machine or component brand is known. This can quickly narrow the product range, especially when the exact machine model or manufacturer reference is also available.

The manufacturer selection can include both equipment manufacturers and specialist component manufacturers. These are not always the same thing. A professional oven, dishwasher or coffee machine can contain components produced by a separate electrical, pump, valve, motor or refrigeration manufacturer.

For this reason, a brand match alone does not prove compatibility. After filtering by manufacturer, verify the OEM or component reference, exact machine model and the relevant technical specifications.

Select by exact machine and model

For machine-specific spare parts, first identify the manufacturer and exact model. Where different revisions or production periods exist, the machine version can also determine which replacement part is required.

This is especially important for parts such as heating elements, door components, pumps, electronic controls and complete assemblies. Two parts intended for machines from the same manufacturer can still differ in voltage, dimensions, mounting points, connections or production version.

Electrical HoReCa components

When selecting electrical components, verify the complete electrical and mechanical specification. Depending on the component this can include voltage, frequency, current, power, contact configuration, probe type, shaft or mounting dimensions and connector layout.

Do not select an electrical replacement from voltage alone. Components with the same supply voltage can perform different functions or use different electrical and mechanical interfaces.

Heating elements

For HoReCa heating elements, compare the OEM reference and machine application together with voltage, wattage, phase configuration, element shape, immersion depth, flange dimensions, mounting arrangement and electrical connections where these are stated.

Matching wattage alone does not make two heating elements interchangeable.

Pumps, motors and solenoid valves

For pumps and motors, relevant specifications can include voltage, frequency, power, rotation, mounting system, shaft dimensions and hydraulic connections.

For solenoid valves, first determine whether the complete valve or only a separate coil or other component is required. Then check valve series, connection type, operating configuration and electrical specifications.

Gas and refrigeration components

Gas and refrigeration parts require their own technical selection criteria. For gas components, use the exact component type, manufacturer reference, connection and operating specification stated for the product.

For refrigeration-system parts, use the dedicated Refrigeration Parts section. Components such as filter driers, fittings and refrigeration solenoid valves should be selected by their component reference and complete refrigeration interface rather than from appearance or nominal size alone.

Door and cabinet components

For door gaskets, verify the exact machine application, gasket construction, overall dimensions, profile and mounting method. Similar outside dimensions do not necessarily indicate the same gasket.

For door handles, locks and springs, check the machine model, component type, left/right orientation, mounting geometry and any relevant spring or electrical specifications.

Coffee equipment spare parts

Some components used in professional coffee equipment are also found elsewhere in the broader HoReCa assortment. For a more focused coffee-machine structure, use the dedicated Espresso Machine Parts section. It groups parts such as brewing-group components, boilers, portafilters, pumps, valves, electrical parts, fittings and gaskets specifically around espresso-machine applications.

For bean grinders and espresso grinders, use Coffee Grinder Parts. Grinder compatibility can depend on the exact brand and model as well as burr dimensions, rotation direction, motor configuration, doser/on-demand design and other component-specific specifications.

For automatic coffee and other vending systems, browse Vending Machine Parts. This keeps espresso machines, coffee grinders, vending equipment and the wider HoReCa assortment connected while preserving a dedicated selection route for each equipment type.

Equipment manufacturer and component manufacturer

The brand of the machine and the manufacturer of the installed component can be different. A machine from one manufacturer may use a pump, motor, thermostat, valve, capacitor or refrigeration component made by another specialist manufacturer.

Where this information is available, distinguish the equipment manufacturer → exact machine/model → actual component manufacturer → component reference → technical specification.

OEM/original and compatible spare parts

Brooks Parts carries both OEM/original parts and compatible replacements. The origin of the replacement and its application should be treated as separate information.

A compatible part should not be interpreted as having been manufactured by the equipment brand simply because an OEM reference or machine brand is listed for compatibility. For either origin, always verify the complete application and technical specification before ordering.

Before ordering a HoReCa spare part

Use the available category and manufacturer filters to narrow the assortment, then verify the reference, exact machine or component series and the specifications relevant to that part.

For coffee equipment, continue directly to Espresso Machine Parts, Coffee Grinder Parts or Vending Machine Parts.