Filter by
Manufacturers
Type part
more... less
Type
Price
€ €
Filter

La Pavoni Diamante Espresso Machine Parts

La Pavoni Diamante Espresso Machine Parts

The La Pavoni Diamante is a modernized espresso machine inspired by the iconic design of the ‘Modello Concorso’ created by Bruno Murani and Enzo Mari in 1956. While the aesthetics are reminiscent of the original, the modern Diamante offers advanced technology and features. The La Pavoni Diamante is available in three versions:

La Pavoni Diamante Espresso Machine Parts – Lever, Manual, and Volumetric Models
Faema E61 steam/water group expanding spring Faema E61 steam/water group expanding spring

Faema E61 steam/water group expanding spring

Every valve needs to have return spring to close again. On this page you will find the return spring used in the Faema E61 steam and water valve. As well in their successors used in Vibiemme, Grimac and la Scala machines. This spring is made out of stainless steel and has an external diameter of 12,5mm and a length of 30mm. So, steam and water valves...
€2.25
Quick-view
Fluid o tech clamp ring pump 100 L/H Fluid o tech clamp ring pump 100 L/H

Fluid o tech clamp ring pump 100 L/H

The rotation pump on this page is made by the Italian manufacturer Fluid o tech, the pump type is designated as model “Standard” with the Fluid o tech manufacturer code: PA0104AGANN0000 This model of rotation pump is a clamp ring type. The pump face and motor face are pushed against each other and a stainless-steel clamp is place around it. This clamp is...
€109.59
Quick-view
Wera shower screen screwdriver slotted Wera shower screen screwdriver slotted

Wera shower screen screwdriver slotted

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...
€13.54
Quick-view
Procon clamp ring pump 180 L/H Procon clamp ring pump 180 L/H

Procon clamp ring pump 180 L/H

The rotary vane espresso machine pump. There are various brands which manufacture these pumps like Fluid o tech, Nuert and Procon. The pump on this page is made by the company Procon. Part number 132A060F123B The pump on this page is called a rotary vane clamp pump. The pump is clamped on a flange with a stainless steel clamp. If you tighten this clamp...
€158.76
Quick-view
PTFE gasket 3/8" 22x16.5x2mm

PTFE gasket 3/8" 22x16.5x2mm

The item on this product page is a PTFE gasket. This gasket is used on a variety of brands with applications such as steam and water valves, sight glasses and brewing groups. you can use this PTFE gasket on brands such as ECM Heidelberg, San Remo, Vibiemme, La Scala, Rancilio and Grimac. The part reference numbers can be found in the extra info tab. This...
€1.31
Quick-view
Valve assembly for steam valve

Valve assembly for steam valve

The item on this product page is a valve gasket part which can be used on various espresso machine brands such as ECM Heidelberg, Grimac, Fiorenzato, Marzocco and Vibiemme. The ECM Heidelberg part reference is P6003.9, the Fiorenzato reference is A2200203, The Grimac reference is A2200203, the Marzocco reference is B.1.004/9 and finally the part...
€8.03
Quick-view
Gaggia heating element gasket Gaggia heating element gasket

Gaggia heating element gasket

the heating element gasket on this product page can be used on various Gaggia and La Pavoni heating elements. The compatible part reference number for Gaggia is4027001000. This heating element gasket can be used on the heating elements used on the Gaggia Deco, Gaggia GE, Gaggia GD, Gaggia LC/D, Gaggia XE, Pavoni Bar, Pavoni Bart, Pavoni P tre, Pavoni P...
€6.14
Quick-view
Faema E61 steam valve pin Faema E61 steam valve pin

Faema E61 steam valve pin

This brass tap spindle is used a the Faema E61 steam and water valve and the valves which have resemblance to the e61 valve used by brands like Vibiemme, La Scala and Grimac. When the shaft axle is turned open or closed, this tap spindle pushes against the valve seat. Which opens or closes the steam/water valve. This specific brass tap spindle has a...
€2.69
Quick-view
Gaggia/La Pavoni sight glass 106x12mm red line Gaggia/La Pavoni sight glass 106x12mm red line

Gaggia/La Pavoni sight glass 106x12mm red line

The sight glass on this page is suitable for multiple models such as La Pavoni and Gaggia. The part references for Gaggia is WGA4001060000 and for La Pavoni it is 453110. This sight glass has a tube diameter of 12mm and a overall length of 106mm. On the back is a red silk screen printed line. This increases the visibility of the water level. This...
€6.27
Quick-view
Hardened stainless steel guide Hardened stainless steel guide

Hardened stainless steel guide

The item on this page is a hardened steel bushing for a steam and water valve. This bushing can be used on various espresso machine brands such as ECM Heidelberg, Fiorenzato, Marzocco and Vibiemme. The ECM Heidelberg part reference number is P6003.4 , the Fiorenzato part reference is A1300120 , the Marzocco reference is B.1.004/4 and the Vibiemme part...
€5.93
Quick-view
Brass half nut 3/8" Brass half nut 3/8"

Brass half nut 3/8" 21x6mm

Brass fittings used on espresso machines are generic items, seen they are used in quite a lot of coffee machines. This specific model is a nut with a 3/8” BSP-G thread with a height of 6mm. The wrench size used for this item is a 21. Which models use this 3/8” BSP-G nut.? Well you can find this nut with brands like: Gaggia, Saeco, Victoria Arduino,...
€2.03
Quick-view
Nipple 1/4"M x 3/8"M Nipple 1/4"M x 3/8"M

Nipple 1/4"M x 3/8"M

The item on this product page is a brass fitting. This fitting has on 1 side a male thread of ¼” BSP-G and on the other side a male thread of 3/8”BSP-G.This brass fitting has been made in Italy. This type of fitting can be found with various espresso machine brands such as Astoria, Grimac, La Carimali, La Spaziale, Nuova Simonelli, La Pavoni, Wega,...
€3.47
Quick-view
E61 style spring holder E61 style spring holder

E61 style spring holder

The item on this product page is a spring guide bushing used on various E61 Style of brewing groups. You can use this item with brands such as ECM Heidelberg, La Scala, Bezzera, Isomac, Pavoni and Brasilia. The Bezzera part reference is 7479942, the Brasilia part reference number is 13657.0.00.04, for ECM Heidelberg it is B7479942, for Isomac ISBUS313116...
€5.14
Quick-view
Boiler top fitting 1/2" Boiler top fitting 1/2"

Boiler top fitting 1/2"

The top HX boiler fitting, a generic item you will find with a lot of espresso machine brands. This ranges from Vibiemme, Grimac, Pavoni, La Scala to Expobar, Brasilia and BFC. This specific item is a casted brass fitting. The side which is screwed into the HX is a ½”BSP-g and the side where the tube to the brewing group goes to is also a...
€19.03
Quick-view
L Fitting brass 3/8" MM L Fitting brass 3/8" MM

L Fitting brass 3/8" MM

On this product page you will find a 3/8” L fitting. This is a generic item which can be used on a variety of espresso machines and own build projects. This L fitting a both Male 3/8”BSP-G fitting. The displayed item has a nickel finish, it is possible that you get a only brass version
€7.77
Quick-view
Gicar flowmeter 1/8" 1,15mm connector with led Gicar flowmeter 1/8" 1,15mm connector with led

Gicar flowmeter 1/8" 1,15mm connector with led

On this page you will find a flowmeter made by the Italian company Gicar. This specific model of flowmeter can be used with a variety of brands such as San Remo, La Cimbali, Nuova Simonelli and Brasilia. The Gicar part numbers for this item are (9.0.25.50G, 9.0.96.50G and 9.0.55.50G) The fittings which can be used on the in and outlet of flowmeter are...
€53.43
Quick-view
Hardened steel shaft lever tap Hardened steel shaft lever tap

Hardened steel shaft lever tap

The item on this page is a hardened steel pin for a steam and water valve. This shaft can be used on various espresso machine brands such as ECM Heidelberg, Fiorenzato, Marzocco and Vibiemme. The ECM Heidelberg part reference number is P6003.3, the Fiorenzato part reference is A2200266, the Marzocco reference is B.1.004/3 and the Vibiemme part...
€12.20
Quick-view
Hardened steel insert Hardened steel insert

Hardened steel insert

The item on this page is a hardened steel bush used on various steam and water valves. This item can be used on brands such as Vibiemme, Marzocco, ECM Heidelberg and Fiorenzato. The ECM Heidelberg part reference number is P6003.2, for Fiorenzato it is A2200265, for Marzocco it is B.1.004/2 and for Vibiemme it is RACCINSRUBLOL. This steel bushing has...
€5.22
Quick-view
Gaggia XD heating element 2 gr 4000/4760W 230V Gaggia XD heating element 2 gr 4000/4760W 230V

Gaggia/Pavoni heating element 2 gr 4000/4760W 230V

The heating element on this page can be used on various 2 group Gaggia and La Pavoni espresso machines. The Gaggia part reference for this item is 11003362 and the La Pavoni part reference is 331153 . This heating element produces 4000/4760W at 220/240V, the element has 6 connecting terminals. The immersed length of the element is 310mm. The flange is has...
€118.75
Quick-view
Level probe 125mm 1/4" Level probe 125mm 1/4"

Level probe 125mm 1/4"

The level probe on this page is used with a variety of espresso machine brands. Such as Brasilia, Gaggia and La Pavoni. The Brasilia part reference for this item is 00649.4.00.08, the Gaggia part reference is WGADM1935 and the La Pavoni part reference is 438023. This stainless-steel level probe has a PTFE insulator. The inner fitting is a 1/8” BSP-G and...
€13.59
Quick-view
Drain valve chrome plated

Drain valve chrome plated

This chrome plated drain valve is used on a variety of espresso machine brands and models which use the E61 style brewing group. The item has a overall length of 26mm and a male thread of ½”. The drain fitting holds the drain jet in place, this part is used a spring support for the drain valve spring. This coffee machine part for the E61 style group is...
€5.90
Quick-view

Available La Pavoni Diamante Models:

  • La Pavoni Diamante L Leva
  • La Pavoni Diamante S
  • La Pavoni Diamante SV

La Pavoni Diamante L Leva

The La Pavoni Diamante L Leva is the closest to the original model in design and operation. This lever-operated version uses a pressurized spring system in the brewing group, eliminating the need for a pump. It is available in 2 and 3 group versions, delivering an authentic and hands-on espresso-making experience.

La Pavoni Diamante S

The La Pavoni Diamante S is equipped with an E61-style brewing group, making it a manual espresso machine that operates using pump pressure. This version provides a modern twist on manual espresso making, with the machine available in both 2 group and 3 group configurations.

La Pavoni Diamante SV

The La Pavoni Diamante SV is the volumetric version of the machine. It features E61-style brewing groups with solenoid valves, allowing for pre-programmed dosing of water through the touch panel. This version is ideal for those seeking consistency and efficiency, available in 2 and 3 group configurations.

If you're unsure which parts you need for your La Pavoni Diamante espresso machine, feel free to contact us for guidance.