Filter by
Price
Coffee grinder part type
Type
Filter

Mazzer coffee grinder parts

One of the most famous manufactures of coffee grinders is the Italian company Mazzer, with it’s full name Mazzer Luigi srl. They have made a variety of iconic coffee grinder ranging from the Mazzer mini to the Mazzer Kony grinder. They produce grinders for the domestic as well as for the commercial Horeca.

Mazzer coffee and espresso grinder parts

Mazzer mini funnel gasket with mesh

On this page you will find a kit for the Mazzer Mini Electronic. This specific kit is installed between the grinder housing of the Mazzer Mini and the Funnel. The gasket is there to keep the wire mesh in place. The wire mesh has the dimensions of 36x32mm. this specific mesh is only suitable for 220/240V models of the Mazzer Mini Electronic A and Mazzer...
€27.60

Mazzer coffee tamper 57.5mm

The tamper on this product p age is a OEM/Original Mazzer spare part. This tamper is attached to the coffee grinder. The Mazzer part references for this item are S000PRA02/QCQ, S000PRA02C and S000PRA02-C. This original tamper has been made from black plastic. The outer diameter of this tamper is 57,5mm. This tamper has been made in Italy You can use...
€26.30

Mazzer compensation ring 32mm

The item on this product page is a OEM/Original Mazzer spare part. This item is a compensation ring used in a Mazzer doser system. The part reference numbers for this item are S000ANA01, S000ANA01/AQQ and S000ANA01/QQQ. This compensation ring has a outer diameter of 32mm and has been made in Italy. This compensation ring can be used on the Mazzer...
€4.73

Mazzer Mini A electronic pushbutton board

The touchpanel board on this page is a OEM/Original Mazzer spare part. This item is suitable for the Mazzer Mini A electronic. The Mazzer part reference for this item is S000SPU01/A. This touchpanel board is located underneath the membrane. The left key is for single dose, the right key for double dose and the middle one is the push button for manual...
€82.93

Mazzer Mini A Electronic push button membrane

On this product page you will find a OEM/Original Mazzer spare part. The item shown on this page is a touchpanel membrane. This membrane can be used on the Mazzer Mini A electronic. The Mazzer part references for this item are S000MEM01, S000MEM01-A and S000MEM01/A This is the sticker where the keys are integrated in, this item does not include the...
€31.45

Mazzer doser cylinder 120x70mm

The Mazzer doser coffee grinders have a doser reservoir on the front of the coffee grinder. You do need to see visually how much coffee there is still left in the doser. Therefore the doser is partially made from a transparent plastic so that you can see how much there is left. The disadvantage is this clear plastic can get dirty, and can’t be...
€27.69

Mazzer machine foot M5x0.75

Almost every Mazzer coffee grinder has 4 individual feet to give it stability in harsh working environments. The feet are made up out of 2 parts. The feet itself. This is a rubber feet with a metal stud sticking out of it. This thread is a M5x0,75mm. The next part is the stainless steel cup which goes over the rubber feet. These feet are only sold per 4...
€5.91

Contactor 3 phase AC3 9A 4Kw (400V) coil 220-380V 50/60Hz

The contactor shown on this page is used with various coffee grinders from the brands Mazzer and Quamar. The Mazzer part reference for this item is S000COC08 and for Quamar 210035. This contactor has been made by the Italian company Lovato. This model is called the BG0910A. 400V 9A with a 230V 50/60Hz Coil. There are 3 normally closed (NC) and 1 normally...
€40.35

Mazzer doser pawl

The item on this product page is a OEM/Original Mazzer spare part. The part references for this item are S000CRA01, S000CRA02, S000CRA02/AQQ, S00SCRA02 and S00SCRA02/QQQ. This doser pawl has been made from casted and machined brass. This item is used in the doser mechanism of various Mazzer coffee grinders. The item has been made in Italy. This...
€48.15

Capacitor 8μF 450V

The capacitor on this page is a 8µF model. This model is manufactured by the Italian company Ducati Energia. The part reference for this item is 41610.1364. This capacitor can be found on a variety of coffee grinders and pump motors of the brands such as Faema, Vibiemme, Anfim, Astoria, Mazzer, Wega and so on. This capacitor produces 8µF at...
€10.44

Mazzer lower microrelease spring

The spring on this product is a OEM/Original Mazzer spare part.  The Mazzer part reference for this item is S000MOB06. This compression spring is the lower micro release spring. This spring has a outer diameter of 13mm a inner diameter of 10,53 and a length of 15mm. This spring has been made in Italy. This spring is used in the doser versions of...
€2.99

Mazzer portafilter holder fork

What does a portafilter holder fork actually do? Well when you lay your portafilter in the fork it supports itself while the ground coffee comes out of the Mazzer Mini. The portafilter fork holder you find on this page is only suitable for the Mazzer Mini Electronic A and the Mazzer Mini Electronic B. The specific fork holder is made out of stainless...
€62.48

Mazzer Luigi srl

The Italian company Mazzer started to produce coffee grinders in 1948. They make coffee grinders under their own name, but they do also manufacture coffee grinders for other espresso machine manufacturers. You need to think of brands such as Astoria CMA/Wega and the famous La Marzocco brand, this is the case with their rebranded models.

Models

Mazzer mini electronic

One of the most famous coffee grinders models of Mazzer is the Mini Electronic. This coffee grinder is a domestic model and is designated as a “on demand” coffee grinder. of this specific model you have 2 types, a version A and a version B. with all their own properties.

This specific coffee grinder is intended to be used by a home barista, so in a domestic setting. It does suit that role perfectly. But you can always use the Mazzer Mini is a commercial setting, if you don’t need to grind too much volume.

 

Mazzer omega hand grinder

The Omega coffee grinder is one of the latest models of Mazzer Luigi srl, but this is not a coffee grinder which is powered by a motor. But with manual power. It Is a specialty coffee hand grinder.

You can use this coffee grinder for a variety of coffee types from French press to espresso and filter coffee.  This hand grinder has been fitted with conical grinding burrs.

  

Keep your Mazzer coffee grinder clean

Keeping your Mazzer coffee grinder clean might be one of the most underestimated cleaning tasks in a bar/restaurant. But the coffee grinder is also a food processing device. So it also need to be kept clean. You can do 2 things, internal and external cleaning.

The external cleaning is pretty simple, take a Brooks microfibre cloth and Puly Bar Igenic or Puly Bar hopper cleaner. With this you can clean off the coffee greases from the coffee hopper and the outside of the grinder.

The internal cleaning can be divided into 2 categories. Weekly cleaning or maintenance. Seen if you don’t do regular maintenance the weekly cleaning cycles won’t have that much effect. You manually need to clean out the grinding chamber with a brush (take out the power plug). When you have cleared that you can run Puly Grind every week true the grinding chamber to make sure that you get the freshest out of your grinder.