Astoria - Argenta

The item on this product page is a brass fitting. This fitting has on 1 side a male thread of ¼” BSP-G and on the other side a male thread of 3/8”BSP-G.This brass fitting has been made in Italy. This type of fitting can be found with various espresso machine brands such as Astoria, Grimac, La Carimali, La Spaziale, Nuova Simonelli, La...

It is quite common on espresso machines that the shower screen in the brewing group is attached with a screw. The issue is that the space between the brewing group and the drip tray is quite often too little for a normal screwdriver. For that reason we have the Wera short version screwdrivers. This specific model is suitable to use in combination with a...

The portafilter gasket on this page is a alternative to the original portafilter gaskets made by the Astoria CMA group. The design of this portafilter gasket is similar to the original and is also made in Italy. The corresponding Astoria part number is 12217  and the one of Wega is WY12217  The outer diameter of this portafilter gasket is 72mm,...

On this product page you will find a EPDM o ring. This o ring is used in a variety of espresso machines and applications. With brands like Astoria, San Marco, Wega, La Pavoni and Brasilia. The o ring is made from EPDM. The thickness of the cord is 2,62mm and the internal diameter of the o ring is 15,08mm This part is used mainly in brewing groups with...

The solenoid valve on this page is slightly different then the flanged 3 way solenoid valve. Instead of the traditional brass solenoid valve flange is this one made from stainless steel. This parker 3 way solenoid valve is mainly used as a brewing group solenoid valve. The Parker part number for this item is 3019F1GRG7XS03XS6 and 131FSG100 As mentioned...

This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal...

On this page you will find a brass brewing group plug. The outer diameter of this plug is 18mm. This plug is used to seal off the nozzle/gigleur compartment. You will find this part on a variety of brewing groups. Brands like Bezzera (5288001) Brasilia (0210600004 ) la Pavoni (313600) and wega espresso machines. If you are not entirely sure if this...

On this page you will find a 110V 3 way solenoid valve made by the Italian manufacturer ODE. This specific model 31A1AR15 is made in Italy. This model is a flange solenoid valve. So it is bolted with 4 Allen bolts against a flat surface and is sealed of by 2 o rings at the bottom. In the brass body of the solenoid valve, you will find a orifice of 1,5mm....

The item on this page is a 3 way solenoid valve made by the brand Lucifer. This item is slightly different, seen it’s not a standard 220/230V model. But it is a 110V model. This 3 way valve can be used on a variety of espresso machine brands such as Casadio, Brugnetti, San Marco, La Scala, Cimbali, Grimac, Faema, Astoria, Nuova Simonelli, La...

On this page you will find one of the most used brewing group solenoid valves in espresso machines. But this is instead of a 230V version a 115V version. This solenoid valve has been manufactured by the company Parker. The Parker parts reference for this solenoid valve is 393106J or 393111J This 3-way solenoid valve is a model with a flat flange, this...

The shower holder diffuser on this page is used for a couple of models produced by the Astoria CMA group. For the Astoria you can find this item on the Astoria Argenta, Astoria Brava, Astoria Denise, Astoria Dora, Astoria Lisa and Astoria Pratic.  For the Wega espresso machines you can find them on the Wega Venere and the Wega Concept 56. This item...

The product on this page is a gigleur/nozzle for inside a brewing group. This type of nozzle can be used with brands from the Astoria CMA group. For Astoria the part number is 10300001 and for Wega the part number is WY10300001 This specific gigleur is made from brass and has a central hole of 0,7mm. The threads used are a M5 with a pitch of 1mm....