Filter by
Shop by Manufacturer
Filter

HoReCa Spare Parts for Commercial Equipment

Find spare parts for professional kitchen, foodservice, refrigeration and vending equipment. Use the Categories filter to narrow the assortment by equipment or component type, or use Shop by Manufacturer to select the relevant machine or component brand.

If you already know the OEM or component reference, use it as a primary identification point and then verify the exact machine model, version and technical specifications. For coffee-specific parts, browse our dedicated Espresso Machine Parts, Coffee Grinder Parts or Vending Machine Parts.

Krupps OEM 103976 temperature probe for tank and boiler

This Krupps temperature probe is designed for temperature measurement and control in the tank and boiler of compatible Krupps warewashing equipment. It is supplied with a 2900 mm lead for flexible routing inside the machine. Part type: Temperature probe (tank & boiler) Cable length: 2900 mm Application: Tank and boiler temperature...
€90.30
Quick-view

Krupps OEM 103349 contact thermostat 105°C 16A manual reset

The Krupps OEM 103349 contact thermostat is a safety temperature limiter used in Krupps warewashing equipment. It trips at 105°C and requires a manual reset, helping protect the machine against overheating. Switch temperature: 105°C Electrical rating: 16A, 250V Reset type: Manual reset Made in: China Compatibility Krupps – Dishwasher...
€29.39
Quick-view

Krupps OEM 3283K air trap

The Krupps OEM 3283K air trap is part of the dishwasher’s water level / pressure system. It provides an air chamber for the pressure circuit, supporting accurate level sensing and stable filling and draining behavior. Brand / OEM: Krupps (OEM) Part type: Air trap Made in: Italy
€123.94
Quick-view

Krupps OEM 103540K microswitch with magnet 10A 250V

The Krupps OEM 103540K microswitch with magnet is used as a safety/position switch in various Krupps commercial dishwashers and glasswashers. It helps the machine detect correct positioning (for example, door or hood status) for safe operation. Brand / OEM: Krupps OEM 103540K Type: microswitch with magnet Contact capacity: 10A Rated...
€79.49
Quick-view

Krupps OEM 3282 air trap Ø33x130 mm with tube Ø8x1050 mm

The Krupps OEM 3282 air trap is used in the water/level system of professional Krupps warewashers. It is supplied with a rubber tube to simplify replacement during servicing. Brand / OEM: Krupps OEM 3282 Part: air trap Air trap size: Ø 33 x 130 mm Included tube: rubber tube external Ø 8 mm, length 1050 mm Made in: Italy Compatible...
€42.80
Quick-view

Sirman OEM MSC04N052V2 cutter lid ø 225 mm

The Sirman OEM MSC04N052V2 cutter lid ø 225 mm is a genuine replacement lid for professional Sirman cutters. It safely closes the bowl during processing, helping to keep ingredients inside the machine and ensuring clean, hygienic operation in daily HoReCa use. This original Sirman cutter lid has an outer diameter of approx. 225 mm and is...
€43.42
Quick-view

Stainless steel meat mincer knife mod. 42

The stainless steel meat mincer knife mod. 42 is a heavy-duty cutting knife for professional meat grinders using the Enterprise 42 system. It restores sharp, efficient cutting so your mincer can deliver a consistent mince texture in butchery and HoReCa applications. This knife is manufactured in stainless steel and built as a model...
€60.53
Quick-view

Sirman OEM 19410152 switch

The Sirman OEM 19410152 switch is a genuine replacement control switch for a wide range of professional Sirman machines. It restores reliable on/off and control functions, helping to keep slicers, graters, mincers and other equipment safe and easy to operate in daily HoReCa use. This original Sirman switch is used on the Mirra Vertical 300 and many other...
€33.22
Quick-view

Stainless steel self-sharpening plate mod. 42/6 ø 6 mm

The stainless steel self-sharpening plate mod. 42/6 is a robust replacement mincer plate for professional meat grinders that use the Enterprise 42 system. With ø 6 mm ejection holes, it is suitable for medium-fine mincing of meat and similar products in daily HoReCa use, helping to maintain a consistent mince texture. This plate is...
€169.28
Quick-view

Fimar compatible CO3192 oven door gasket 550x400 mm

The Fimar compatible CO3192 oven door gasket 550x400 mm is a replacement seal for professional ovens that use a rectangular door gasket of this size. It restores a tight closure between the oven door and the front frame, helping to keep heat and steam inside the cavity, improve cooking consistency and reduce energy loss in daily HoReCa use....
€174.28
Quick-view

Fimar OEM 36G6960 ejector disc for vegetable chopper

The Fimar OEM 36G6960 ejector disc for vegetable chopper is a genuine discharge disc for Fimar vegetables and mozzarella cutters. Mounted beneath the cutting discs, it helps eject sliced, grated or shredded product out of the chamber and towards the outlet, ensuring a smooth product flow and reducing residue inside the machine during continuous...
€56.22
Quick-view

Fimar OEM CO7021 cone large for juicer SPM/SPL

The Fimar OEM CO7021 cone large for juicer SPM/SPL is a genuine large juicing cone for Fimar professional juicer systems. It is designed for processing larger fruits and delivering a stable, efficient juice flow in demanding HoReCa environments. This original Fimar OEM cone is used in juicer setups combined with specific Fimar machines such...
€51.11
Quick-view

Fimar OEM SL2681 chain 3/8"x7/32"

The Fimar OEM SL2681 chain 3/8"x7/32" is a genuine drive chain for Fimar spiral kneading machines in the 12 and 18 series. It transfers motor power to the spiral tool, restoring smooth and reliable dough mixing when the original chain is worn, stretched or damaged in daily bakery, pizzeria and HoReCa use. This drive chain has a 3/8" pitch...
€35.78
Quick-view

Fimar OEM SL3438 chain 1/2" 68P with FM (spiral 38/CN)

The Fimar OEM SL3438 chain 1/2" 68P with FM (spiral 38/CN) is a genuine drive chain for Fimar 38-series spiral kneading machines. It transmits motor power to the spiral tool, restoring smooth and reliable dough mixing when the original chain has become worn or stretched in daily bakery and HoReCa use. This chain has a 1/2" pitch with 68...
€51.11
Quick-view

Blade cover tie rod shaft 150 mm M6 for FAC, Fimar, Sirman slicers

The blade cover tie rod shaft 150 mm M6 is a replacement fastening shaft used to secure the blade cover on professional slicers from FAC, Fimar and Sirman. It keeps the blade guard firmly in position, contributing to safe operation and correct protection in daily use in delicatessens, supermarkets and HoReCa kitchens. This tie rod shaft has...
€22.97
Quick-view

Fimar OEM SL0843 ejector disc vegetable chopper low type

The Fimar OEM SL0843 ejector disc low type is a genuine discharge plate for Fimar vegetable and mozzarella cutters. Mounted under the cutting tools, it helps eject sliced, shredded or diced product efficiently from the chamber, keeping the cutting area clear and ensuring a constant product flow in professional HoReCa kitchens, pizzerias and food...
€25.58
Quick-view

Fimar OEM CO6583 belt AFF HBS300/L Easy

The Fimar OEM CO6583 belt AFF HBS300/L Easy is a genuine drive belt for Fimar HBS300 and HBS300L slicers. It transfers power from the motor to the blade pulley, ensuring smooth, consistent rotation and clean slicing performance in professional HoReCa kitchens, delis and supermarkets. This belt is designed specifically for the HBS300 Easy...
€56.22
Quick-view

RGV OEM 00000000482 hand protection for slicing machine RGV 195–220

The RGV OEM 00000000482 hand protection is a genuine safety guard for RGV 195 and 220 slicing machines. Mounted on the carriage side, it helps protect the operator’s hand during slicing, reducing the risk of accidental contact with the blade and improving safety in professional HoReCa and light commercial use. This guard has a hole spacing...
€13.68
Quick-view

Parker coil YB09 220/230V 9W for coffee machines

This Parker YB09 solenoid coil is used on a wide range of professional espresso and coffee machines. It is mounted on Parker solenoid valves in the hydraulic circuits of brands such as Elektra, Vibiemme, Visacrem, Quality Espresso and others. The coil operates at 220/230V AC with a power of 9W and a frequency of 50/60Hz, ideal for standard European...
€38.47
Quick-view

Tecnoeka OEM 01200370 single-phase thermostat 60–318°C

The Tecnoeka OEM 01200370 is the original single-phase oven thermostat used in a wide range of Tecnoeka convection and electric steam ovens. With an adjustable range of 60–318°C and a 16A–250V rating, this thermostat regulates the chamber temperature via a D-shaped control shaft and a capillary bulb sensor. It is designed for intensive,...
€80.37
Quick-view

Tecnoeka OEM 01201780 solenoid valve RPE 1-way 180° ø 8 mm

The Tecnoeka OEM 01201780 is the original RPE 1-way 180° solenoid valve used in the water circuits of Tecnoeka convection ovens, electric steam ovens and extraction hoods. This 220/240V 50/60 Hz valve is designed for a maximum water temperature of 90°C and is equipped with a 3/4" inlet and ø 8 mm quick-coupling outlet. It provides reliable...
€62.90
Quick-view

Tecnoeka OEM 01001000 facade gasket for MKF511TS oven

The Tecnoeka OEM 01001000 facade gasket is the original sealing gasket for the front frame of Tecnoeka MKF511TS ovens and related 511-series combi/steam ovens. This cut-to-size gasket guarantees a proper seal between the oven chamber and door, helping to keep steam and heat inside the cooking cavity for consistent professional baking and roasting results....
€97.83
Quick-view

Tecnoeka OEM 00013730 lamp receptacle with G9 40W 230V lamp

The Tecnoeka OEM 00013730 lamp receptacle is supplied complete with a G9 40W 230V halogen lamp and pre-wired cable. The compact glass body is suitable for high-temperature use in professional ovens and fits in a 35 mm mounting hole, making it ideal for chamber illumination. This is an original Tecnoeka spare part, Made in Germany. Technical...
€44.27
Quick-view

Tecnoeka OEM 00002331 lamp holder with G9 25W 230V lamp

The Tecnoeka OEM 00002331 lamp holder is supplied complete with a G9 25W 230V halogen lamp and is used for illuminating the baking chamber of professional Tecnoeka ovens. The glass body is suitable for high-temperature applications up to 300 °C and fits in a 38 mm cut-out in the oven wall. This is an original Tecnoeka spare part, Made in Italy....
€17.49
Quick-view

How to find the correct HoReCa spare part

Professional catering equipment contains mechanical, electrical, hydraulic, gas and refrigeration components. Many parts can look similar while using different dimensions, connections or electrical specifications. Start with the information you already have and narrow the assortment using the category and manufacturer filters.

Where available, a useful identification order is OEM or component reference → manufacturer → exact machine and model → version or production period → component type → technical specification → OEM/original or compatible → product.

For components that are used across different machine brands, the component manufacturer's own reference and technical interface can be more useful than the equipment brand alone.

Filter HoReCa parts by category

Use the Categories filter when you already know the equipment type or the type of component that needs to be replaced. Brooks Parts groups both complete equipment applications and technical component families within the HoReCa assortment.

The category is the first refinement step. Within a category, continue comparing the specifications that determine compatibility for that particular component.

Filter by manufacturer

Use Shop by Manufacturer when the machine or component brand is known. This can quickly narrow the product range, especially when the exact machine model or manufacturer reference is also available.

The manufacturer selection can include both equipment manufacturers and specialist component manufacturers. These are not always the same thing. A professional oven, dishwasher or coffee machine can contain components produced by a separate electrical, pump, valve, motor or refrigeration manufacturer.

For this reason, a brand match alone does not prove compatibility. After filtering by manufacturer, verify the OEM or component reference, exact machine model and the relevant technical specifications.

Select by exact machine and model

For machine-specific spare parts, first identify the manufacturer and exact model. Where different revisions or production periods exist, the machine version can also determine which replacement part is required.

This is especially important for parts such as heating elements, door components, pumps, electronic controls and complete assemblies. Two parts intended for machines from the same manufacturer can still differ in voltage, dimensions, mounting points, connections or production version.

Electrical HoReCa components

When selecting electrical components, verify the complete electrical and mechanical specification. Depending on the component this can include voltage, frequency, current, power, contact configuration, probe type, shaft or mounting dimensions and connector layout.

Do not select an electrical replacement from voltage alone. Components with the same supply voltage can perform different functions or use different electrical and mechanical interfaces.

Heating elements

For HoReCa heating elements, compare the OEM reference and machine application together with voltage, wattage, phase configuration, element shape, immersion depth, flange dimensions, mounting arrangement and electrical connections where these are stated.

Matching wattage alone does not make two heating elements interchangeable.

Pumps, motors and solenoid valves

For pumps and motors, relevant specifications can include voltage, frequency, power, rotation, mounting system, shaft dimensions and hydraulic connections.

For solenoid valves, first determine whether the complete valve or only a separate coil or other component is required. Then check valve series, connection type, operating configuration and electrical specifications.

Gas and refrigeration components

Gas and refrigeration parts require their own technical selection criteria. For gas components, use the exact component type, manufacturer reference, connection and operating specification stated for the product.

For refrigeration-system parts, use the dedicated Refrigeration Parts section. Components such as filter driers, fittings and refrigeration solenoid valves should be selected by their component reference and complete refrigeration interface rather than from appearance or nominal size alone.

Door and cabinet components

For door gaskets, verify the exact machine application, gasket construction, overall dimensions, profile and mounting method. Similar outside dimensions do not necessarily indicate the same gasket.

For door handles, locks and springs, check the machine model, component type, left/right orientation, mounting geometry and any relevant spring or electrical specifications.

Coffee equipment spare parts

Some components used in professional coffee equipment are also found elsewhere in the broader HoReCa assortment. For a more focused coffee-machine structure, use the dedicated Espresso Machine Parts section. It groups parts such as brewing-group components, boilers, portafilters, pumps, valves, electrical parts, fittings and gaskets specifically around espresso-machine applications.

For bean grinders and espresso grinders, use Coffee Grinder Parts. Grinder compatibility can depend on the exact brand and model as well as burr dimensions, rotation direction, motor configuration, doser/on-demand design and other component-specific specifications.

For automatic coffee and other vending systems, browse Vending Machine Parts. This keeps espresso machines, coffee grinders, vending equipment and the wider HoReCa assortment connected while preserving a dedicated selection route for each equipment type.

Equipment manufacturer and component manufacturer

The brand of the machine and the manufacturer of the installed component can be different. A machine from one manufacturer may use a pump, motor, thermostat, valve, capacitor or refrigeration component made by another specialist manufacturer.

Where this information is available, distinguish the equipment manufacturer → exact machine/model → actual component manufacturer → component reference → technical specification.

OEM/original and compatible spare parts

Brooks Parts carries both OEM/original parts and compatible replacements. The origin of the replacement and its application should be treated as separate information.

A compatible part should not be interpreted as having been manufactured by the equipment brand simply because an OEM reference or machine brand is listed for compatibility. For either origin, always verify the complete application and technical specification before ordering.

Before ordering a HoReCa spare part

Use the available category and manufacturer filters to narrow the assortment, then verify the reference, exact machine or component series and the specifications relevant to that part.

For coffee equipment, continue directly to Espresso Machine Parts, Coffee Grinder Parts or Vending Machine Parts.