San Remo - Brewing group
The portafilter gasket on this page can be used on various espresso machine models such as ECM Heidelberg, La Pavoni, Rocket and Wega. The part references for this item are for La Pavoni 361014, for ECM Heidelberg C449900229 , for Rocket C449900229 and for Wega W10321/ WY12227
This portafilter gasket has been made from NBR with shore 75. This portafilter...
€3.15
E61 style groups shower without welding 60mm
The function of a shower screen is to spread the water coming out off the group on a equal way over the coffee. One of the standardized sizes and most common, is the 60mm shower screen. This shower is a pressed model made by IMS IMSDR300. The outer diameter is 60mm, the internal height is 17mm and the diameter of the punctured holes is 2,5mm
Note: this is...
€4.02
SanRemo portafilter gasket 73x57x8.2mm original
The portafilter gasket on this page can be used on a variety of SanRemo coffee machines, such as the brewing groups used on the Café Racer, Capri, F18, Opera, Torino, Verona and the Zoe Competition. This specific item is a OEM/original SanRemo spare part and has the part reference number 10502110.
The gasket has a outer diameter of 73mm, a inner diameter...
€4.36
Wera shower screen screwdriver slotted
In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.
But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...
€11.50
SanRemo IMS competition shower screen 60mm original
This shower screen is a OEM/original SanRemo spare part, this is clearly viasbale from the SR logo in the mesh. It is a OEM part, but it is made by IMS filtri. This is standard that shower screens are made by IMS Filtri. The SanRemo part reference number is 10058104
This shower screen is from the IMS competition series. The shower screen has 98 holes of...
€27.35
Faema E61 plug for camme holder
This ½” chrome plated stuffing nut has a central hole of 10,7mm. The item itself has a height of 17mm. You need a metric key 22 to install this item. This is quite a common key size in most peoples toolbox. But what is the function of this part and where can it be found.
This threaded stuffing gland is used in the side of the Faema E61, Faema E61 Legend...
€7.11
Faema E61 group spout breaker
The fitting on this product page is the last fitting on various E61 style of brewing groups. The drain fitting. This item can be used on various brands which use the E61 group, such as Faema, Grimac, La Pavoni, Rocket and Wega.
This drain fitting has been made from machined brass. Which has been polished, nickel and chrome plated. The thread on one side...
€7.42
O ring gasket 6.07x1.78mm Solenoid valve
This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps.
The o ring has a wire diameter of 1,78mm and a internal...
€0.48
Cafelat blue silicone portafilter gasket 73x57x8,5mm
This size of portafilter gasket is the most common portafilter gasket you will find. This size can be used on the e61 style of brewing groups. You can use them on brands such as Faema, San Remo, Vibiemme , ECM, La Pavoni, Wega, Rocket and so on. This gasket is made by the HongKong based company Cafelat.
This gasket is made from food graded blue silicone....
€4.36
Faema E61 group infusion spring
On this page you will find a stainless steel compression spring with a outer dimension of 14mm and a length at rest of 45mm. This compression spring is being used in a variety of espresso machine brewing groups. This ranges from the famous Faema E61 brewing group, the E61 style brewing group. But also a variety of other type of brewing groups used by...
€1.29
San Remo 1/8 - 3/8" extension 61mm
The item on this product page is only used in some San Remo brewing groups. This item is a brewing group extension fitting. This product is a OEM/Original San Remo part. The part reference number for this item is 14852032A
This extension has been made from chrome plated brass. The hole is 6mm. The group side is a 1/8” male fitting, the inlet side...
€26.05