Filter by
Type part
more... less
Brand
more... less
Filter

Brewing group

On this overview page you will find basically all the parts you are going to need for your espresso machine brewing group. The most well known brewing group around is the E61 lever brewing group, which originates from the Faema E61 espresso machine. It has its origin with Faema, but there are a lot of differences between the brands they use. You can find this type of brewing group can be found on brands such as San Remo, ECM Heidelberg,Vibiemme, Bezzera, Wega, Grimac, La Scala and Brasilia.

On this page you will find the standard general maintenance parts like the portafilter gaskets, shower screensbrewing group gaskets and brewing group filter mesh. But also items which don’t get replaced that often like solenoid valves, springs, microswitches, heat exchangers and diffusers plates.

In every category you can search, with the help of the filter, for the espresso machine brand you need replacement parts for. If you can’t find the part your looking for don’t hesitate to contact us.

Espresso machine brewing group parts

Vibiemme Domobar lever microswitch 16A 250V

The microswitch on this product page is used on various espresso machine brands such as Vibiemme and La Pavoni. The La Pavoni part reference number is 435080 and the Vibiemme part reference number is ELETMICP1. This microswitch is used as part of the brewing group. When this switch is turned on the pump starts running. This microswitch has a longer lever...
€20.88
Quick-view

Brewing group drain valve

This drain sleeve on this page is used on E61 style brewing groups used by the brands Brasilia and La Scala. The Brasilia part reference for this item is 05597.0.10.04 and the La Scala part reference for this item is C-0307. This plated drain sleeve has been machined from brass and after that it has been plated with nickel and chrome. This item has...
€54.39
Quick-view

O ring gasket 31,42x2,62mm FKM

The item on this product page is a o ring used on various Elektra espresso machine models. The Elektra part reference numbers for this item are 00098035 and 01228035. This o ring has been made from the material FKM. The cord diameter is 2,62mm the internal diameter is 31,42mm. This o ring has been made in Italy. This o ring can be used on the Elektra...
€4.84
Quick-view

La Carimali nozzle m10x1mm 0,8mm

The item on this page is a brewing group gigleur/nozzle. This nozzle is used on a variety of Carimali espresso machines. The Carimali part reference number for this item is 22.00772. This brass nozzle has on both sides a M10x1 male thread. The hole in the middle has a diameter of 0,8mm. This item has been made in Italy. This item can be used on the...
€10.30
Quick-view

Bezzera lever microswitch

The microswitch on this page is a model which is used with various Bezzera espresso machines. The Bezzera part reference for this item is 7633907 This microswitch has a small roller, instead of just a push button. The maximum amp rating for switch is 16A a t 250V. This switch has been made in Italy. You can find this switch on the Bezzera BZ07, Bezzera...
€33.86
Quick-view

Rancilio shower holder diffuser

On this page you will find a diffuser plate suitable for various Rancilio brewing groups. The Rancilio part number for this item is 20200181  This shower holder diffuser is made from brass. The external diameter of this part is 58mm. the height is 10mm and the central hole is 16mm. Which Rancilio espresso machine models use this shower screen holder...
€60.39
Quick-view

Cimbali/Casadio/Faema sproeier 0,8mm

the item on this a brewing group gigleur, which are used on various Casadio, Cimbali and Faema espresso machines. The Casadio part reference number is 903997000, the Cimbali part reference number is 903-997-000 and the Faema part reference number is 903-997-000. This gigleur is used on the Cimbali and Faema espresso machines on the water inlet, with the...
€70.43
Quick-view

Wega shower screen holder diffuser

On this product page you will find a spare part suitable for various Wega brewing groups. The Wega part reference number for this item is WY27105000. With this shower holder you make it possible to install a shower screen with a bolt, on a E61 style of brewing group used on various Wega espresso machines. This brass machined shower holder has a outer...
€77.85
Quick-view

E61 style upper sleeve

The chrome plated upper sleeve can be used with a wide selection of E61 style brewing groups. You can use this item with various brands such as Brasilia, Wega, Faema, Grimac, Bezzera, la Scala and Royal. This upper sleeve has been made from machined brass. This has been polished, to get the mirror finish. After that it has been nickel and chrome plated....
€80.99
Quick-view

Astoria and Wega upper drain sleeve body

The upper drain sleeve body on this page can only be used on various Astoria and Wega espresso machines. The Wega part reference for this item is WY25739502 and the Astoria reference is 25739502 and 4825739502  This item does look like a upper drain sleeve used on the E61 style of brewing groups. But it is not suitable for that...
€130.21
Quick-view

Faema E64 camme spring

The item on this product page can be used on a older Faema espresso machine brewing group, the Faema E64. This compression spring is used as to seal off the drain valve in the bottom of the brewing group. This camme compression spring is made from stainless steel. The outer diameter is 9,4mm and the length is 20mm.
€1.48
Quick-view

La San Marco group locking gasket 95x45x2mm

The gasket on this page is a group locking gasket used on various La San Marco espresso machine models. The La San Marco part reference for this item is 109070  This gasket is made from a fibre material. The length of the gasket is 95mm and the width is 45mm. there are 2 holes for threads and one for a supply tube. This gasket has been made in Italy...
€5.22
Quick-view

Astoria/Wega brewing group cap dia 18mm

The fitting on this page is a plug which can be used on various Astoria and Wega espresso machines. The Astoria part reference of this 25789306 and the Wega part reference is WY25789306. This cap has a male thread and a outer diameter of 18mm. the item has been made in Italy. You can use this plug on the Wega Start, Wega Venere, Astoria Divina,...
€18.15
Quick-view

Gaggia E90/D90 heat exchanger 40x210mm

The heat exchanger on this product page is a OEM/Original Gaggia spare part. This item has the Gaggia part reference number of CA0433/A. This heat exchanger is made from copper. The outer diameter is 40mm and the overall length of this heat exchanger is 210mm. You can use this heat exchanger on the Gaggia D90 and the Gaggia E90
€136.45
Quick-view

Parker 3 way solenoid valve 24V DC

On this solenoid valve is a Lucifer/Parker 3 way solenoid valve which is used on various espresso machine models of Rancilio, the reference part number for Rancilio is 34040024. This brewing group solenoid valve is a flanged 3 way solenoid valve. The coil used on this solenoid valve is a 24V DC 9W coil, with the part number 481865C2. The outlet on top of...
€121.49
Quick-view

San Marco heat exchanger gasket new model 27x21x2mm

This item is a PTFE gasket which can be found in a variety of La San Marco espresso machines. The La San Marco part references for this item are 109106 and CTSGUA0380. This gasket is made from the material PTFE. The outer diameter is 27mm and the inner diameter is 21mm. The thickness is 2mm. This gasket has been made in Italy. You can use gasket on...
€1.03
Quick-view

La San Marco PTFE gasket 34x27x2mm

The gasket on this page can be used in various models of brewing groups of La San Marco. The La San Marco part reference number for this item is 109078. This gasket is made from the material PTFE. The outer diameter is 34mm, the inner diameter is 27mm and the thickness is 2mm. This gasket is made in Italy. You can use this PTFE gasket on the lever...
€1.03
Quick-view

La San Marco EN heat exchanger gasket 34x26,5x2mm

The gasket on this product page can be used on various heat exchanger (HX) systems on various San Marco espresso machine models. The San Marco part reference numbers for this item are 109078 and CTSGUA0260.  This fibre gasket has a outer diameter of 34mm a inner diameter of 26,5mm and a thickness of 2mm. This gasket has been made in Italy. You...
€1.04
Quick-view

Astoria HX curved 42mm dia

The item on this product page is a OEM/original Astoria CMA spare part. This bent heat exchanger is used on various Astoria espresso machine models. The Astoria part references for this item are 63050 and 63100. This heat exchanger is made from copper. It has been made with a slight curve into it. The diameter of the HX is 42mm. This item has been made in...
€162.62
Quick-view

Gaggia baby group shower

The shower screen on this page can only be used on various domestic Gaggia espresso machines.  This shower screen has been made by the Italian company IMS Filtri, the part reference for this item is RCDE190. For this item is no Gaggia part reference number available. This shower screen has been made from stainless steel. The outer diameter of this...
€4.01
Quick-view

La San Marco shower holder 5mm

The shower holder diffuser on this page is a OEM/Original La San Marco spare part. The San Marco part reference for this item is 206823  The shower diffuser plate on this page has an outer diameter of 54mm and a height of 12mm. The central hole is 5mm. This original La San Marco shower holder diffuser plate is used on the La San Marco 105.
€42.94
Quick-view

Astoria Wega shower holder CTS group 10.5mm

The shower holder diffuser on this page can be used on various Astoria and Wega espresso machine. The Astoria part reference number 25627004 and the Wega part reference is WY25627004. This brass shower diffuser has a outer diameter of 52mm and a height of 10,5mm. The central hole is 5,5mm. This item has been made in Italy. You can use this shower...
€74.36
Quick-view