Brewing group
The fitting cap on this page is a OEM/Original Astoria Wega spare part. The Astoria part reference for this item is 25789301 and the Wega part reference is WY25789301.
This brass machined cap has a outer diameter of 18mm and has been made in Italy.
You can use this cap on the Wega Start, Wega Venere, Astoria Brava, Astoria Rapallo, and the Astoria Sibilla.
€66.15
Astoria chromed clamping ring
The item on this product page is a filter holder coupling, this coupling is used on various Astoria CMA espresso machines. This item is a OEM/Original Astoria Spare part. The Astoria part reference numbers for this item are 25250, 4825250 and 53030.
At some point it can occur that your portafilter coupling ring doesn’t function properly...
€289.74
Solenoid valve permanent magnet
The item on this page is a flat a permanent magnet used on solenoid valves. This type of part is mainly used on older espresso machines. These are used with brands such as Bezzera, Spaziale, Pavoni and Brasilia. The Bezzera part reference number is 5963015, the Pavoni part reference numbers are 360006 and 394740. The La Spaziale part reference number...
€37.70
La San Marco sliding bushing 7x10mm
The item on this product page is a OEM/Original La San Marco spare part. This is a sliding bushing used on the manual brewing groups, so not the leva brewing groups. The part reference number for this item is 205175.
This sliding bush is made from brass. and has a diameter of 7x10mm.
€3.12
La San Marco group shower EN gasket 51x19x1mm
This group gasket is used in various older La San Marco espresso machines. This gasket goes between the brewing group and the shower holder plate itself. There is no part reference number available for this item.
This gasket is made from a universal type of carbo gasket material. The outer diameter is 51mm the inner diameter is 19mm and the thickness is...
€2.26
Crushable copper washer 13.5x10x1.5 mm 1/8"
The gasket on this product page is called crushable copper gasket. This gasket can be used to seal off male threads of 1/8”. When the fitting has been loosened it is advised to replace the copper gasket as well.
The gasket has a outer diameter of 13mm a inner diameter of 10mm and a thickness of 1,5mm.
€1.55
Faema group locking gasket
The group locking gasket on this page can be used on various older Faema espresso machines. The Faema part reference for this item is 47014117206.
This fibre gasket has a length of 80mm a width of 21mm and a thickness of 2mm. The distance between the holes is 60mm. This gasket has been made in Italy.
You can use this gasket on the following Faema...
€5.06
Faema No stop drain valve
This brewing group spare part is used on various older Faema brewing groups. The Faema part reference number for this item is 3161116451.
This valve part is used in the exhaust side of the brewing group. This valve part has been made from machined brass. on the inside of the gasket holder is a gasket already installed. This item has been made in...
€11.17
Vibiemme solenoid group locking gasket
The group locking gasket on this product page is used with a variety Vibiemme solenoid groups. The Vibiemme part reference for this item is GUARGRKO.
This paper gasket is rectangular with 5 holes. The gasket is 72mm with 64 mm and a thickness of 2mm. This gasket has been made in Italy.
You can use this group locking gasket on the Vibiemme Evolution,...
€5.04
La San Marco group discharging tube
The item on this product page is a drain pipe used on various La San Marco espresso machines. This drain pipe is used on older models La San Marco brewing groups. The part reference numbers for this item are 205751 and CCMMIN2790.
This drain tube has been made from brass. the fitting on the top is a 1/8” fitting. The Length of the tube...
€55.16
Astoria standard brewing group
The item on this product page is a OEM/original Astoria brewing group, this brewing group is complete and ready to install. The Astoria part references for this brewing group are 56054 and 56082101.
This brewing group is made from casted brass. The body itself has been left as a machined casting. But the brewing group ring has been polished and nickel...
€819.79
Astoria Brava/Gloria brewing group
The item on this product page is a OEM/original Astoria brewing group, this brewing group is almost ready to use. The Astoria part references for this brewing group are4856082103, 56082001 and 56082103.
This brewing group is made from casted brass. This brass is polished, nickel and chrome plated to give it this finish. This brewing group does not come...
€885.30
Vibiemme chromed lever sleeve
The Vibiemme RACCCACOGR camme shaft holder on the manual Vibiemme espresso machines is also quite different then with a standard E61 style brewing group. This part is, similar to the drain sleeve, attached to the side of the brewing group with 2 M6 allen bolts. In the situation of the Vibiemme solenoid valve group in E61 style, this is a chrome plated...
€60.39
Faema drain valve spring holder
the item on this product page is a OEM/Original Faema spare part. This item is a brass spring guide bushing. This brass spring guide bushing is used on the brewing groups used on the Faema E64, Faema E66, Faema P4 and the Faema P6
€1.13
Gasket PTFE 10x7.3x0.5mm
The gasket on this page is a PTFE gasket used on various older Faema brewing groups. This gasket can be used on the Faema E64, Faema E66, Faema P4 and the Faema P5.
This gasket is made from ptfe. The outer diameter is 10mm, the inner diameter is 7mm and the thickness is 0,5mm. This gasket is made in Italy
€0.79
La Cimbali brewing group water inlet tube
The item on this product page is a copper brewing group feeding tube. This tube can be used on various La Cimbali espresso machines. The Cimbali part references for this item are 421-413-020, 421513000, 421-513-000, 421513010 and 421-513-010.
This feeding tube is made from a combination of materials. The fittings are made from brass, the tube is...
€67.03
Grimac/Fiorenzato solenoid valve brewing group
The item on this product page is a solenoid valve brewing group, this specific model is used on various Fiorenzato and Grimac espresso machines. The Fiorenzato part references are A2200035 and the Grimac references are 1200500018 and GR500C.
This brewing group is from the E61 type. This item is made from casted and machined brass (OT58), which...
€566.68
Elektra brewing group chrome cap
The fitting on this page is a OEM/Original Elektra espresso machines spare parts. The Elektra part reference for this item is 00921021.
This item has been made from machined brass, which has been nickel and chrome plated afterwards. The outer diameter of this cap is 30mm.
You can use this cap on the Elektra Belle-Epoque, Elektra Classic, Elektra...
€84.83
Elektra group spring
The item on this product page is a OEM/Original Elektra spare part. This compression spring is used in various Elektra brewing groups, it is a filter locking spring. The Elektra part reference for this item is 01242035
The OEM compression spring has a outer diameter of 20mm. The length of this spring is 19mm.
You can use this compression spring on the...
€9.77
Elektra inox filter group
the item on this product page is a stainless steel water filter. This water filter can be found on various espresso machine models of Elektra. The Elektra part reference for this item is 00111035
This stainless steel water filter has a outer diameter of 18mm and a overall length of 20mm. This brewing group water filter has been made in Italy.
You...
€7.33
Elektra brewing group gigleur
The item on this product page is a gigleur/nozzle used on various Elektra espresso machines. This item is a OEM/Original Elektra spare part. The Elektra part reference is 01336014.
This nozzle has been made from machined brass. The thread used is a M5 which has a thread pitch of 1mm. The hole diameter is 0,9mm.
You can use this nozzle on the...
€15.01
Elektra chrome ring
The filter holder coupling on this product page is a OEM/Original Elektra spare part. This filter holder coupling has the Elektra part references of 00006021 and 02151021.
This portafilter coupling can be used on a variety of Elektra models such as the Elektra Classic, Elektra Kappa, Elektra Modern, Elektra Sixties and the Elektra Microcasa. But not...
€340.36
Astoria Thermosiphonic heat exchanger boiler original
The item on this product page is a OEM/Original Astoria spare part. This item is a thermosiphonic heat exchanger. This heat exchanger is used on various Astoria espresso machines and has the Astoria part reference number for this item is 63200002
This heat exchanger boiler is made from copper with fittings soldered to it. The outer diameter of this...
€334.41