Astoria Pratic - Motor and pump

This motor is made by RPM from Italy with model number for this pump motor C013728. It has a power of 120W with 230V at 50Hz. The start capacitor for this motor is a 8 µf. This espresso machine motor is used in combination with a clamp on rotatry vane pump. This motor is clamped to the flange with a stainless steel motor clamp. For this motor a...

The product on this page is a set of individual components which are used for coupling a espresso machine pump to a motor. This specific model is a OEM/Original Astoria CMA part. The Astoria part number for this item is 83260016R  and the Wega part number is WY83260016R  This set consists of a stainless steel motor to pump coupling. A shaft...

The rotary vane espresso machine pump. There are various brands which manufacture these pumps like Fluid o tech, Nuert and Procon. The pump on this page is made by the company Procon. Part number 132A060F123B The pump on this page is called a rotary vane clamp pump. The pump is clamped on a flange with a stainless steel clamp. If you tighten this clamp...

The stainless steel filter on this page can be used in a variety of applications like in hydraulic systems, pump inlets and in water inlet valves. This model of stainless steel filter is mainly used with Astoria CMA branded machines. The Astoria part number is 10254 and the Wega part number is WY10254  This dome shaped stainless steel wire mesh...

On this product page you will find a blind klingersil 4400 gasket used in a variety of Astoria and Wega espresso machines. The item listed is a OEM/original item. The Astoria part number used is 12007 and the Wega part number is WY12007 This flat gasket has a outer diameter of 11mm and a thickness of 3mm. This gasket is used to seal of a section of the...

On this page you will find a copper gasket, not just a copper gasket but a crushable version. This specific model has an outer diameter of 22mm an internal diameter of 17mm and a height of 3mm. Copper crushable washers can be used in various pump and boiler related applications. You need to tighten the fitting enough to crush the copper, which makes the...

The item on this page is a espresso machine pump filter. Not suitable for a vibration pump. This item can be used on basically every espresso machine pump which has a 3/8” BSP-G Thread. But you will see this type of pump filter on Astoria and Wega espresso machines. The part number 56116 for Astoria and for Wega the number WY56116. This filter has...

Brass nipple 3/8" x 3/8" MM BSP-G Return to our fitting overview

On this product page you will find a brass espresso machine pump. This pump can be used on espresso machine brands such as Astoria and Wega. The part references for this rotation pump is for Astoria 26303 and for Wega WY26303  This rotary vane espresso machine pump has been made by the Italian company Fluid o Tech. This model is a clamp on...

The double portafilter shown on this product page is a OEM/Original Astoria espresso machine spare part. The Astoria part reference for this item is 27311051 and 8327311051R. Note, this is the reference for the body 27311000. This single portafilter has a open spout, this make it easier to clean your portafilter. The ear orientation is 45 degree....

The rotation pump on this page is made by the Italian manufacturer Fluid o tech, the pump type is designated as model “Standard” with the Fluid o tech manufacturer code: PA0104AGANN0000 This model of rotation pump is a clamp ring type. The pump face and motor face are pushed against each other and a stainless-steel clamp is place around it....