Astoria Pratic - Steam/water valve

The espresso machines of Astoria and Wega use in most cases the same types of water and steam valves, but there are some differences in components. On this page you will find the water and steam valve shaft assembly with a pin length of 91mm. This assembly is complete and can be screwed into the valve body right away. The Astoria part number for this part...

The steam and water valve nut on this page can be used on almost every Astoria and Wega steam and water valve. This axle nut makes sure that there is a constant pressure on the valve shaft spring, which prevents leaking from the valve shaft. This item is a OEM/original Astoria/Wega spare part. The Astoria part number for this item is 25385001 and...

The valve fitting on this page can be found on almost every Astoria and Wega steam and water valve. This coupling holds the steam axle and valve gasket holder in place when in use. The item screws into the valve body. The Astoria part number for this item is 25678001. The Wega part number for this item is WY25678001  You can find this fitting on...

The steam wand on this page is suitable for a variety of Astoria espresso machines. This part has the Astoria part number 25763116. The stainless-steel steam tube has a diameter of 8mm. The steam tube itself comes with a rubber heat protector, so you won’t burn your fingers while holding the steam wand. The stainless-steel steam stem has a...

The PTFE gasket on this page can be used on a variety of espresso machines brands and various applications. You will mainly find this gasket as a seal with water and steam valves, but you can also find them in brewing groups. This PTFE gasket has a outer diameter of 21mm a inner diameter of 16,8mm and a thickness of 2mm. You can use this flat gasket in...

On this page you will find a o ring with the dimensions 10,78x2.62mm. It is made from FKM (viton is a registered trade brand, but the material is identical) This o ring is used in a variety of locations in espresso machines. It is used with steam and water wands in espresso machines with brands like: Marzocco, Casadio, Vibiemme, Grimac, Cimbali and Faema....

The o ring on this page can be used in various applications in espresso machines. This ranges from water and steam valves, water inlet taps and water levels. The part on this page is a O ring made from the material EPDM. This o ring has a cord diameter of 2,7mm and a inner diameter of 12,1mm. This o ring is produced in Italy. You will find this o ring...

This shaft retaining ring is mainly used on the Astoria and Wega steam valve axles. This is done to keep the valve gasket holder attached to the valve axle. The part number used for this item by Astoria is 10001 and for Wega is it WY10001  This shaft retaining ring has a internal diameter of 6mm a external diameter of 12,3mm and a thickness of...

The valve shaft gasket on this page is used with basically every steam and water valve manufactured for Astoria and Wega espresso machines. This gasket makes sure that there doesn’t leak any steam or water past the shaft of the valve. The Astoria part reference is 12204 and the Wega part reference is WY12204  This gasket has been made out...

The nut on this page is a M3 nut made from brass. You will find this type of nut on variety of steam and water valves of  Astoria and Wega espresso machines. The Astoria part reference for this item is 23050 and the Wega part reference is WY23050. This brass nut has a metric female thread of M3. The nut has made according to specifications of...

This brass nut you will find on almost every steam and water valve of the Astoria CMA group. This brass nut holds the steam and water valve shaft in place inside the gasket holder. The Astoria part reference for this item is 25461 and the Wega part reference for this item is WY25461  You can find this item basically on every model like the Astoria...

The article on this page is a steam and water valve body for Astoria and Wega espresso machines. This item has been casted and machined out of brass. The Astoria Reference is 53003 and the Wega reference is WY53003. The casted steam and water valve has multiple threads machined into it. The inlet thread is a 3/8” BSP-G and the connection for the...