Filter by
Type part
Type
Price
Filter

Astoria Sabrina - Steam/water valve

Astoria Sabrina espresso machine parts steam and water valve

Astoria Sabrina espresso machine parts steam water valve

Astoria Wega steam valve nut

The steam and water valve nut on this page can be used on almost every Astoria and Wega steam and water valve. This axle nut makes sure that there is a constant pressure on the valve shaft spring, which prevents leaking from the valve shaft. This item is a OEM/original Astoria/Wega spare part. The Astoria part number for this item is 25385001 and...
€7.51

External seeger stainless steel 6mm

This shaft retaining ring is mainly used on the Astoria and Wega steam valve axles. This is done to keep the valve gasket holder attached to the valve axle. The part number used for this item by Astoria is 10001 and for Wega is it WY10001  This shaft retaining ring has a internal diameter of 6mm a external diameter of 12,3mm and a thickness of...
€0.64

Astoria Argenta stainless steel steam pipe

The steam wand on this page is suitable for a variety of Astoria espresso machines. This part has the Astoria part number 25763116. The stainless-steel steam tube has a diameter of 8mm. The steam tube itself comes with a rubber heat protector, so you won’t burn your fingers while holding the steam wand. The stainless-steel steam stem has a...
€54.83

Astoria Wega tap joint spring 11,4x16mm

The compression spring on this page is mainly used with the steam and water valves on the Astoria and Wega espresso machines. But it has also multiple purposes in the steam valve. This item is a OEM/Original item. The Astoria part number is 10452 and the Wega part number is WY10465. This compression spring is used to put pressure on the shaft gasket...
€1.61

Half nut M26x1.5 brass

The product on this page is a hexagonal brass nut used on the steam and water valves on Astoria and Wega espresso machines. The Astoria part number for this item is 25384 and the Wega number is WY25384  The main components of a Wega and Astoria steam wand are the valve body and the shaft assembly. The shaft assembly is screwed into the body...
€3.64

Astoria Wega steam valve gasket holder

This steam and water tab gasket holder can be used in almost every steam and water valve used by the espresso machine manufacturer Astoria CMA. This item can be found in Astoria espresso machines with part reference 25616 and with Wega espresso machines under the reference WY25616. This gasket holder has on one side room for the flat gasket with the...
€7.51

Astoria Wega steam/water valve fitting

The valve fitting on this page can be found on almost every Astoria and Wega steam and water valve. This coupling holds the steam axle and valve gasket holder in place when in use. The item screws into the valve body. The Astoria part number for this item is 25678001. The Wega part number for this item is WY25678001  You can find this fitting on...
€17.53

O ring gasket EPDM 10.77x2.62mm

The o ring on this page can be used in various applications in espresso machines. This ranges from water and steam valves, water inlet taps and water levels. The part on this page is a O ring made from the material EPDM. This o ring has a cord diameter of 2,7mm and a inner diameter of 12,1mm. This o ring is produced in Italy. You will find this o ring...
€1.23

PTFE gasket 21x16.8x2mm

The PTFE gasket on this page can be used on a variety of espresso machines brands and various applications. You will mainly find this gasket as a seal with water and steam valves, but you can also find them in brewing groups. This PTFE gasket has a outer diameter of 21mm a inner diameter of 16,8mm and a thickness of 2mm. You can use this flat gasket in...
€0.79

O ring gasket 6x1.2mm

The o ring on this page is used to seal off the steam tip from the steam wand at the bottom. You can find this o ring with a variety of brands like Spaziale, Astoria and Wega espresso machines. With the part numbers of Spaziale 08354, Astoria 12300013 and Wega WY12300013. This o ring has a cord diameter of 1,2mm and a internal diameter of 6mm. The o...
€1.10

O ring gasket FKM 10.78x2.62mm

On this page you will find a o ring with the dimensions 10,78x2.62mm. It is made from FKM (viton is a registered trade brand, but the material is identical) This o ring is used in a variety of locations in espresso machines. It is used with steam and water wands in espresso machines with brands like: Marzocco, Casadio, Vibiemme, Grimac, Cimbali and Faema....
€0.90

Astoria Wega steam water shaft gasket

The valve shaft gasket on this page is used with basically every steam and water valve manufactured for Astoria and Wega espresso machines. This gasket makes sure that there doesn’t leak any steam or water past the shaft of the valve. The Astoria part reference is 12204 and the Wega part reference is WY12204  This gasket has been made out...
€1.24