On  this page you will find a 3 way solenoid valve made by the company Parker. This specific model is a 24V AC 3 way valve. Which can be used on some Faema and San Marco brewing groups. The parker part number for this item is 393110J This solenoid valve is a flanged 3 way valve. The flange is sealed off with the 2 o rings at the bottom of the valve....

On this solenoid valve is a Lucifer/Parker 3 way solenoid valve which is used on various espresso machine models of Rancilio, the reference part number for Rancilio is 34040024. This brewing group solenoid valve is a flanged 3 way solenoid valve. The coil used on this solenoid valve is a 24V DC 9W coil, with the part number 481865C2. The outlet on top of...

The solenoid on this page is quite a typical 2 way flanged solenoid valve which can be used on for instance a water inlet valve. This valve is manufactured by the company Parker in Italy. The Parker part number for this item is 393232J This specific model of solenoid valve is a flanged model, these models seal at the bottom with 2 o rings to a other...

The rotation pump on this page is made by Fluid o tech. This model of pump is designated as a Compact model. The pump has the Fluid o tech code CA0104AGAFN0000 or CA0104AGANN0000. This specific model of Fluid o tech pump is type which is called a clamp ring pump. This pump type is mated against the face of a espresso machine motor and a clamp is placed...

Fluid o tech is not only famous because of their rotation pumps. But also for their vibration pumps, this principle is the same as with the Ulka vibration pumps. But these pumps are a lot more durable. The part number for this part is 1106PAIFB2E0000. On this page you will find the 70W vibration pump which runs on 100/110V at 50/60Hz. These pumps can not...

The rotary vane pump on this page is slightly different then a normal rotary vane pump. This specific model is made by Procon in Ireland. (CO1309BF and 131A060F123B) with a NSF certification The model pump is a clamp on rotary vane pump. The flanges of the pump and motor are pushed against each other and a stainless steel clamp is placed over it and...

The product on this page is a set of individual components which are used for coupling a espresso machine pump to a motor. This specific model is a OEM/Original Astoria CMA part. The Astoria part number for this item is 83260016R  and the Wega part number is WY83260016R  This set consists of a stainless steel motor to pump coupling. A shaft...

Suitable for the new Faema E61 Legend and Jubilee

Ulka vibration pump EP5 24V. Max pressure 15 bar, Max flow rate 650 cc/min. Correct working: 2 min. ON / 1 min. OFF.

The boiler gasket on this page is used for a variety of Gaggia espresso machines. From the antique ones all the way to the modern ones. The Gaggia part references for this item are 4027014000 and CA0321/01. This boiler gasket has been made from AFM34 from Victor Reinz. This gasket has a outer diameter of 220mm a inner diameter of 168mm and a...

If a boiler has a bolt on flange, it needs to be sealed in sort of a way. That’s why you have boiler gaskets. This boiler gasket is suitable for a variety of Rancilio espresso machine models. The Rancilio part number for this boiler gasket is 36930011  This boiler gasket has been made out of a fibre gasket material. The outer diameter of this...

The gasket shown on this product page can be used on various Vibiemme espresso machine boilers. The Vibiemme part reference for this item is GUARFL205T  This boiler gasket has a outer diameter of 165mm a inner diameter of 150mm and a thickness of 3mm. This gasket has been made from PTFE. Made in Italy. You can use this boiler gasket on the Vibiemme...