Filter by
Price
Type part
more... less
Type
Filter

Casadio espresso machine parts

The Casadio espresso machine brand is one of the newer commercial espresso machine brands. The brand Casadio is part of the La Cimbali Group. So you will also find a lot of interchangeable spare parts on Casadio espresso machines which you will also find on espresso machines of Cimbali and Faema.

Casadio espresso machine parts| Brooks-parts.com

Parker 3 way solenoid valve 24V DC

On this solenoid valve is a Lucifer/Parker 3 way solenoid valve which is used on various espresso machine models of Rancilio, the reference part number for Rancilio is 34040024. This brewing group solenoid valve is a flanged 3 way solenoid valve. The coil used on this solenoid valve is a 24V DC 9W coil, with the part number 481865C2. The outlet on top of...
€96.85

RPM screw motor with junction box 150W 230V

This espresso machine motor is produced by the Italian company RPM (model 11039007). This model is a flange espresso machine motor instead of a clamp ring motor. These types of motors are common with brands like Faema, La Cimbali and Casadio. This specific motor has 150W 230V with 50/60Hz. To start the motor there is capacitor attached to the pump motor...
€263.83

Filterholder suplement gasket 73x59x0.8mm

The paper shim on this page is one of the most widely used paper shim. You can use this type with a wide selection of espresso machine brewing groups. What are the dimensions of this paper shim? They have a outer diameter of 73mm, a inner diameter of 59mm and a thickness of 0,8mm. What does a paper shim do? Brewing group locking mechanisms wear due to...
€0.52

Filterbasket 1 coffee 6gr 70x19.5mm

The single filterbasket model shown on this page is mainly used on Astoria and Wega espresso machines. Note: this basket can be used on any portafilter which has a similar 70mm outer diameter filterbasket. This single coffee filterbasket has been made by the Italian filterbasket manufacturer IMS Filtri, their reference number for this item is CM1T007....
€4.09

La Cimbali steam water valve

The steam and water valve on this page is used on most La Cimbali espresso machines. But you can find this model as well on Casadio and Faema espresso machines. For the part references check the extra info tab on the side. This complete steam and water valve has been casted out of brass and machined afterwards. The valve has 2 connections. For the steam...
€41.73

Rectangular red on off switch 30 x 22mm

The switch on this is a push button bipolar switch and can be used on various Astoria espresso machine models. The Astoria part reference number for this switch is 18268.  This switch is a so called momentary switch, this switch goes automatically to the 0 position. The switch is rated for 16A at 250V. There is a indicator light inside the switch....
€4.09

La Cimbali brewing group screw

The stainless steel screw on this page is used to hold the filter holder coupling in it’s place on various La Cimbali espresso machines. The Cimbali part reference for this item is 593811000 and 593811010. This stainless steel coupling screw can be used on variety of la Cimbali models such as the La Cimbali M39, La Cimbali M39-GT, La Cimbali...
€4.52

Safety valve 3/8" 2.0 bar TW1 cert

The boiler valve on this page is a safety valve which can be used on various La Cimbali espresso machines. The Cimbali part reference is 532392600 / 532-392-600. This valve has a male 3/8” BSP-G thread. The valve has been calibrated at 2,0 bar. This is not adjustable. When the valve opens the steam outlet flow is 43,3 kg/h. This Italian made...
€26.62

Parker 3 way solenoid valve 24V 50/60Hz

On  this page you will find a 3 way solenoid valve made by the company Parker. This specific model is a 24V AC 3 way valve. Which can be used on some Faema and San Marco brewing groups. The parker part number for this item is 393110J This solenoid valve is a flanged 3 way valve. The flange is sealed off with the 2 o rings at the bottom of the valve....
€89.89

Asco pressure switch P303T02 3 poles 20A

The pressure switch on this page is the Asco P303T02, Asco used to be the company Sirai. This pressure switch is used on various espresso machine brands such as Casadio and La Cimbali. The part references are for Casadio 532195500 and for Cimbali 532-195-500. This pressure switch is a 3 poles 20A model. The connection at the bottom is a...
€101.01

Procon Flange pump 180 L/H with small shaft

This Procon rotation pump is slightly different then most pumps made for the espresso machine market by Procon. This pump is only suitable for a selection of coffee machine brands. The Procon part number for this item is 112T060F123B130 As mentioned earlier this is a bolt on espresso machine pump. The motor has a flange with bolt holes in in it. You...
€173.38

Below you will find a overview of the various coffee grinders and espresso machines made by the company Casadio. If you can’t find the information your looking for, don’t hesitate to contact us so that we can help you out.

Models espresso machines

Casadio Undici

The Casadio Undici espresso machine is one of the more expensive models made by the Casadio company. It is available in a single group and a 2 group version. Both in the feature of a tall cup version, for take away coffee. This model is available in both a volumetric(A model) and a non volumetric (S model)

Casadio Dieci

The Casadio Dieci is one of the espresso machine models made by the Italian manufacturer Casadio. It is a 2 group coffee machine but also available in a 1 group version, fitted with a two steam tubes and a water outlet. This model is made in a S and a A version. The A version is the volumetric model and the S version is the non volumetric coffee machine version of the Dieci.

 
Models coffee grinders

Casadio Enea

The coffee grinder model, Casadio Enea, is one of the coffee grinders Casadio produces. This specific model is made in 2 versions. You have a doser version and a grind “on demand” version. both these coffee grinders use flat grinding burrs, which makes them cheaper to replace. With the Casadio Enea you can provide most restaurants and bars with finely ground coffee.

Casadio Instantaneo

The Casadio Instantaneo coffee grinder is one of the few coffee grinders Casadio made which has been fitted with Conical grinding blades. Most of them are fitted with flat grinding burrs. The earliest version of the coffee grinder came on the market in 2003. Where the latest version was introduced in 2010. The design of this coffee grinder was different then most coffee grinders, it has a more boxed shape size. Most coffee grinders are round, or have a rounded off shape.

 

Casadio spare parts from Brooks

At Brooks we sell a variety of spare parts for Casadio coffee machines as well as for Casadio Coffee grinders. The items we list can be OEM/Original Casadio spare parts, but they can also be after market versions. If we don’t have the items in stock we can always order them, but the disadvantage of spare parts from Casadio is that the lead time are pretty long.