Thomas Diaphragm pump 24Vdc

On this page you will find a orange indicator light used in a variety of espresso machines made by ECM Heidelberg. This orange indicator light has the ECM Heidelberg part reference of B7633617  This orange indicator light is a 230V model. The head of the light is 18mm. The hole needs to be 12mm. It is rated up to 120°C. This light has been made...

The item on this product page is a steam wand which can be used on various Grimac espresso machines. The part reference numbers are 1260200031 and GR211. This steam wand comes as ready to install assembly. This item comes with the nut, tube and the steam tip. This item has been made in Italy. This steam tube can be used on the Grimac G10, Grimac Zola I,...

The item on this product page is a brass fitting. This fitting has on 1 side a male thread of ¼” BSP-G and on the other side a male thread of 3/8”BSP-G.This brass fitting has been made in Italy. This type of fitting can be found with various espresso machine brands such as Astoria, Grimac, La Carimali, La Spaziale, Nuova Simonelli, La...

The coffee grinder part on this page is a doser pawl, which is used with various brands of the La Cimbali Group. You can use this doser pawl with brands such as Casadio, Cimbali and Faema. The Casadio part reference is 4831134778, the Cimbali part references are 4831134778  and 4831-134-778. For Faema the reference is 4831134778. This doser...

The item on this page is a toroidal transformer and is used with a variety of espresso machine models of La Cimbali and Faema. This transformer runs on 240V at 50/60Hz and will reduce the voltage to be used on the electronics. The device does come with connecting wiring. You will see this device only used by the la Cimbali group. You can use this...

The Italian company Puly makes next to daily cleaning detergents also espresso machine descalers. This product is called Puly Calcinet. This product is specially designed to remove limescale from boilers, heat exchangers and copper tubing without corroding them. How do you need to use Calcinet. You need to dilute the crystals in lukewarm water. The...

This nozzle/gigleur is installed primarily in the brewing group on a espresso machine. It has a hole diameter 0,6mm. There are a variety of diameters available. The thread used on the part is a male M6 with a pitch of 0,75mm. The thread pitch can vary between 0,75mm and 1mm keep that in mind. But also the diameter of the nozzle can vary, so expect when...

The part on this page is a straight push in fitting, this model of fitting can be used on various espresso machine brands of the La Cimbali Group. You can use this push in fitting with Cimbali, Faema and Casadio espresso machines. The Casadio part reference is for this item 532650100, for Cimbali they are 532650100 and 532-650-100 and the Faema part...